REPAIR, MAINTENANCES AND REPLACEMENT OF OLD DAMAGED WALL PANELING, ROOF CEILING, ROOF SHEETS AND REPAIRS TO ROOF INCLUDING OTHER CIVIL REPAIR WORKS AT NAYA RAIPUR MIL STN UNDER AGE (I) NAYA RAIPUR

Amount

Dismantling of wall and ceiling boards (fibre, pulp,insulation etc) or insulation board/slabs/blankets any thickness including cover fillets all as specified.

Supply & fixing 'E' board 605 x 605 x 4 mm thick white prelaminated set & embosed, reinforced, designer ceiling board tiles of approved texture fixed at all height laid on hot dipped galvanised iron imposed grid with 24 mm wide T-section exposed flanges which shall be powder coated, white,.the frame work shall comprises of main runner made from 0.33 mm thick galvanised steel sheet and of size 24 x 32 x 300 mm and spaced at 1200 mm center to center fixed to be structural soffits by approved hangers at 1200 mm rawl center, hangers of GI wire 4 mm dia to be fixed by approved rawl plug, level and fasteners and screws etc., the last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall, flush fitting of 120 mm long cross tee (with double stiching) to be interlocked between main runners at 600 mm center to center, size 1200 x 600 mm modules, cross tee longer than 600 mm to be supported independently on 600 x 600 mm moduler to be formed by fitting 600 mm long cross tee centrally between the 1200 mm cross tee. Tee, perimeter wall angle shall be of 0.45 mm thick GS sheet of size 19 x 19 mm and 300 mm long of white colour all as per manufacturer's instructions complete all as specified and directed.

S&F for PVC wall lining(hollow) consisting of 5mm thick printed PVC sheet used instead of plain colour PVC sheets includingof solvent cement or with fixing screws and fixing at site on PVC frame complete all as specified and directed.

S&F for Asbestos cement plain building boards 6 to 8mm thick fixed to timber MS frame work with screws fixed with screw to timber/MS frame work complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided complete all as specified and directed.

M&L Rolled MS sections as in framing for cladding, glazing and the like including door frames/chowkats, fixed with angle cleats and connecting plates of grade Fe 410-W (Gde E-250) etc complete all as specified and directed.

S&F Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; (square or round bar)barred iron doors and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Removing existing water proofing treatment and preparing surfaces to the entire satisfaction of Engineer-in-Charge / GE including taking down existing plaster, cleaning of all foreign material such as grass, roots, dust etc and roughening the concrete surfaces by wire brushing and washing down to remove dust etc. flushing at junction of parapets complete and removing the same to the places where directed by Engineer-in-Charge

M&L for rendering 15mm thick on roof surfaces in CM 1:4 complete all as specified and direcetd.

M&L for preparation of roof surfaces, applying a coat of primer@ 0.40Kgs/sqm applying a coat of bitumen grade 85/25 @1.2kg/sqm supplying and laying water proofing treatment with using polymeric water proofing membrane (weight not less then 3kg/Sqm) consisting of 100 micron HMHDPE film centre core including applying a coat of bitumen 85/25 grade @ 1.2kg per sqm on top surface of membrane and torch application of membrane with 10cm overlap where required and finally finished with and including a coat of aluminium paint @0.20Ltr/Sqm as per manufacture instruction complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauze, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Preparation and repair to holes with section gel, joints of the sheets and after that laying and fixing of membrane of 1.5mm thick over the roof sheets and apply acylic base paint over the roof complete all as specified and directed. Note: rate for scaffolding up to 7.5 mtr and other arrangments are including the coated rate.

Taking down chowkats or frames Not exceeding 1.5 Sqm with shutter (Without taking off shutters from the frame) & removing from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but n.exc 4 sq.m with shutter (Without taking off shutters from the frame) & removing from site complete all as specified and directed.

S&F 125x60mm size of pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates, hinges etc. complete size /profile of frame as per IS complete all as specified and directed.

30 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified and directed.

S&F MS 100 mm size butt hinges medium wt. of cold rolled complete all as specified and directed.

S & F Aluminium handles, cast type anodised150mm size complete all as specified and directed.

S & F Aluminium handles, cast type anodised100mm size complete all as specified and directed.

S & F in repair Door closer hydraulically regulated of Aluminium (Extruded section) body designation No.2, universe type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F in repair 20 mm dia decorative type curtain rod with rings and brackets complete all as specified and directed.

S&F in repair galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in repairs complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15cm thick (below or above ground level) complete all as specified and directed.

Roughening of old concrete surfaces by picking, sweeping, clean and washing down with water to remove dust etc complete all as specified and directed.

M & L Brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and fair incl filling of expansion joints with sealing compound complete all as specified and directed.

M&L for PCC (1:3:6) Type C1 using 20mm graded stone agg as in surface channel & drain incl form work complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 450x350x5to6mm thick over10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces all as specified and directed

M&L non skid coloured ceramic tiles 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.06 sqm but n.exc 0.11sqm in floor etc,over 15 mm thick screed bed in CM(1:6),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular)polished light shed, area of each tiles not exceeding 0.36 sqm, as in wall/ Skirtiing etc. over 10mm thick plaster in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed

Demolition of brickwork built in cement mortar with all quinces the cleanly etc complete all as specified and as directed.

M&L brick work with modular fly ash bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and fair without using extra cement complete all as specified and directed.

M&L for two coats of cement base paint incl preparation of new surface of wall over and incl a coat of primer complete all as specified and as directed.

M&L of two coat of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth incl preparation of surfaces complete all as specified and directed.

M&L one coat of synthetic enamel paint on old steel surfaces of any description not otherwise described over 10cm width or girth including preparation of old surfaces complete and all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floor, aprons etc..complete all as specified and directed.

M&L 20mm thick granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar for 1:4 incl pointing in white cement (1:2) using marble dust with remixture of pigment to match with shade of granite all as specified and directed.

Total contract sum shall be calculated after deduction of schedule of credit amount of Rs. 18,130.00

M/s Rahul Traders (BID ID -3322142)

M/S INDIA ENTERPRISES (BID ID -3321606)