SBM-2.0 2025-2026

Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2 meters in hard stiff clay, stiff block cotton hard red earth, murrains, gravel stoney earth and earth mixed with small size boulders and hard gravel soil etc., complete as per standard specification

Plain Cement concrete 1:4:8 mix using 40mm HBG metal for foundation and flooring including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc., complete as per standard specification

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc. Centering for soffits of RCC slabs plain surface including strutting upto 3 meter height using mild steel sheet of size 90cmx60cmx10 gauge with MS angles of size 25mmx2mmx3mm laid over silver oak (CW) joists of size 10cmx6cm spaced upto 90cm c/c and supported casurina props or 10cm to 13cm dia spaced at 0.750cm c/c complying withstandard specification Footing, side wall & Grade Beam

For Coloumn

For Roof

Supplying and fabrication placing in postion of M.S. (or) RTS rods for required size and length as directed by the departmental officers approved design including bending cutting tying and cost of binding wire cost and conveyance of all materials to site etc., complete as per standard specification

Reinforced cement concrete 1:1/2:3 mix using 20mm ISS metal from the approved quarry including mixing, laying, consolidating, curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Collection, supply and filling with well gravel including cost and conveyance of all materials and stacking them at road side to departmental gauge for pre-measurement including all labour charges for filling etc., complete as per standard specification.

Brick Work in Cement Mortor 1:5 Mix (one cement, five M.sand) using best Country III Class Bricks of size 8¾"x4¼x2¾ from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Plastering with cement mortar 1:3 mix to 10mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Plastering with cement mortar 1:3 mix to 20mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Plastering with cement mortar 1:5 mix to 12mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Paving the floor with best quality vitrified Tiles of following size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing of walls with glazed tiles of size 30 cm x20 cm x 6mm finished thickness with c.m 1:2- and polished with same color cement including all cost and convene of all materials etc.,complete

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Manufacturing supplying and fixing of PVC DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers.

Supply and fixing in position of RCC Jolly of size .90 x 060m including cost and conveyance of all material to site and all other labour charges for fixing etc., Complete.

Supply and fixing of MS Grill Gate for Entrance including cost and conveyance of all materials to site and all other labour charges etc., to complete as per std., specification.

Supply and fixing in position of indian make colour water closet of size 58 cm (23inches) oriissa pan type with P or S trap and with sand cushion and etc., complete with necessary connection including cost and conveyance of all materials to site and all labour charges etc., complete as per statard specification

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings...

Supplying and fixing in position best Bevelled Edge MIRROR of 6mm thick of size 50cm x 40cm fibre glass shelf type with necessary plywood backing and rubber button, chromium plated screws, teakwood plugs, etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing best approved quality Brass C.P / Al anodised Towel rail 600mm. long and 20mm Diameter with brackets of same material including cost of Teak-Wood plugs and C.P.Screws etc., complete complying with standard specifications

Supplying and fixing best approved quality C.P.Soap Tray of size 150mm X 100mm including cost of Teak Woodplugs, brass screws complete complying with standard specifications.

Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications.

Supply and Fixing of 2000 Lit Capasity HDPE Tank including cost and coveyance of all charges etc., complete

Supply and Fixing of Following PVC and GI Pipes and Specials of good quality including cost of materials and labour with cost for coveyence to site etc Complete complying with standard Specifications. etc., 32mm PVC Pipe

32mm PVC Coupling

32mm PVC Elbow

32mm PVC Tee

32mm GM Gate Value

32mm x 25mm PVC Reducer

20mm GI Tap

20mm GI Pipe

110mm PVC 6 Ksc Pipe

100mm Dia PVC Cowl

50mm PVC Elbow

50mm PVC Tee

50mm PVC Bend

Wiring with 2 x 1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with paintingof suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC light point / fan point (for electronic regulator) (sd 17)

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for incandescent lamp with 15 W bulb, wire and making good of the concealed portion with suitable colour SD 85

Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade insuitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mmcopper wire and making good of the concealed position. Supply and Run of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade insuitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulatedSC unsheathed FRLS copper wire with painting of suitable colour

Supply and fixing of 32 Amps DP Switch of 500 V with metal clad with fuse and neutral (Side Handle) on suitable TW Board , with earth connection only

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. SD127

Supply and Fixing Of Incinator materials With EB Connection including all Other Labour Charges

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia StainlessSteel pipe post of 1.00mm thick as vertical at 900mmcentre with 2 Nos. of 25mm dia intermediate horizontal stainlesssteel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plateencased in the base concrete. The rate is inclusive of thecharges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete