Loading
Loading…
Loading…
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
7 Aug 2026, 6:00 pm
GE I R AND D Chandigarh
Garrison Engineer I R and D, DIHAR Base Lab, Ground Floor, Near 3 (BRD) AF Stn, Industrial Area, Ph-II, Ramdarbar, Chandigarh
CERTAIN REPAIRS TO JOINERY, ALUMINIUM PARTITIONING AND OTHER ALLIED WORKS IN ZONE-II, III, IV, V, VI, VII, VIII RTRS AT TBRL RANGE RAMGARH
2026_MES_777145_1
GE I R AND D/CHD-39/2026-27
Open Tender
Civil Works
Item Rate
180 days
Ramgarh
As per tender Documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandigarh
₹40,000
Yes
7 Aug 2026
8 Jul 2026
10 Aug 2026
8 Jul 2026
7 Aug 2026
31 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed. | 18 | Each | - | - |
| 2 | All as per serial item No 1 above but exc. 1.5 Sqm and n.exc. 4 Sqm each complete all as specified and directed.. | 25 | Each | - | - |
| 3 | Taking down shutters of any description n.exc. 1 Sqm each complete all as specified and directed. | 12 | Each | - | - |
| 4 | All as per serial item No 3 above but exc. 1 Sqm and n.exc. 2 Sqm each complete all as specified and directed.. | 12 | Each | - | - |
| 5 | Refixing shutters in same opening of any description n exc 1 Sqm each in same opening complete all as specified and directed. | 6 | Per Leaf | - | - |
| 6 | Refixing shutters in same opening of any description exc 1 Sqm but n exc 2 sqm each in same opening complete all as specified and directed. | 5 | Per Leaf | - | - |
| 7 | Cutting holes for inserting hold fast and making good dismentled portion in CM (1:3) in brick walls, built in cement mortar or cement concrete 1:2:4 type B1as required exc one brick but not exc two bricks complete all as specified and direcrted. | 80 | Each | - | - |
| 8 | Supply and fixing for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed. | 14 | Sqm | - | - |
| 9 | Supply and fixing for factory made solid PVC chowkhats or frames of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and directed. | 48 | RM | - | - |
| 10 | Supply and fixing for aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed. | 70 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.26 MB
Tenderdocuments39.pdf
Tender Documents • 1.10 MB
BOQ_870332.xls
BOQ • 0.29 MB
Corrigendum.pdf
PDF • 0.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].