CWE/P-17/2023-24

Amount

M&L for Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surface in roads, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming( including supply of road metal) and making good by applying tack coat using paving bitumenVG-10 @ 05kg/ 10 Sqm putting in premixed bituminious macadam, well rammed and sealed with binder 9.8 Kg per 10 sqm, blended with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth pf potholes exc 30mm, complete all as specified and directed.

M&L for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, and applying evenly a priming/tack coat with paving bituminous primer using paving bitumen (Viscosity Grade - 10) VG-10 @ 5 Kg per 10 Sqm of road surface and providing bituminous premixed asphaltic semi-dense concrete 30 mm consolidated thickness using crushed graded stone aggregate with paving bitumen VG-30 with 5.50% binder content by weight of total mix, rolled and compacted to required camber and gradient with self propelled mechanical paver and rolled to uniform smooth surfaces with power roller 8 to 12 tonnes, complete all as specified and directed.

M&L for applying evenly a priming / tack coat with bituminous primer using paving bitumen (Viscosity Grade - 10) VG-10 @ 10 Kg / 10 Sqm of road surface, complete all as specified and directed.

M&L for premixed bituminous macadam with 5.5 % of binder content by weight of total mix using paving bitumen VG-30 laid with self propelling mechanical paver, rolled and compacted to required smooth surrface, camber and gradient (consolidated thickness 75 mm or less) to make good the cut edges of roads etc, complete all as specified and directed.

M&L for painting lines, dashes arrows, letters etc on roads , pavement and the like using thermoplastic paint 2mm thick with glass beads @125 grams/Sqm using special applicator machine with heating arrangemen upto 160 C exc 10 cm wide white/black or golden yellow until desired result is obtained complete all as specified and directed by Engineer-in-charge.

S&F of Solar road delineator 3 LEDs colour red/yellow housed in plastic body LEDs, solar-cells battery and light sensor well protected inside polycarbonate sheet device proctected with power coated wire mesh cage. System mounted over 47mm dia steel tube powder coated of length 600mm having sheet foot for firm grip to ground Delineator to have additional reflective bands. System workable for 2-3 days (nights) after full charge of 8 to 10 hours, complete all as specified and directed.

Supply and fixing solar cat eye alunimum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consitig of super bright LED with 10,000 to 18,000 mcd complete all as per manufactures instructions and all as specified and directed.

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule(BoQ) to arrive at Contract Sum.

Sandeep Kumar