Name of Work :- Repair of 02 Nos. 500 MT Capacity TPDS SFC Godown At- Baniyapur Block, Dist- Saran

Demolishing cement concrete including disposal of material within 50 metre lead:

Dismantling roofing including ridges, hips valleys and gutters etc. and stacking the material within 50 metres lead of:

Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead:

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

Brick work with bricks of class designation 100A in foundations and plinth in :

Extra for Brick work in superstructure above plinth level upto floor V cum

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work puto plinth level

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with G.I.J. or L hooks . Bolts and nuts 8 mm dia. G. 1. limpet and bitumen washers complete.

Providing and fixing ball bearing for rolling shutters

Providing and fixing 15 cm wide 45 cm over all semi circular plain G.S.sheet gutter with iron brackets 40x3 mm size bolts, nuts and washers etc. including making necessary connections with rain water pipes complete.

Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows all complete with.

Providing & fixing fly proof wire gauze to windows, clere story windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.

Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, 2nd & 4th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS:702, 3rd layer of roofing membrane APP modified Polymericmembrane 2.0mm thick of 3.00 Kg/sqm weight consisting of fivelayers prefabricated with centre core as lOOmicron HMHDPE film sandwitched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation100 grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat which shall be paid for separately as per DSR Item no. 12.19.

Supplying and fixing-rolling shuters of approved make.made of required size of M.S.Iaths interlocked together through their intire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arragements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25mmM.S. Laths with 1.25mm thick top cover.

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings completejncluding applying a priming coat of approved steel primer.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars TMTC-500-8mm dia.

Thermo-Mechanically Treated bars TMTC-500-12mm dia

Removing white or colour wash by scrapping and sand paper in and preparing the surface smooth including necessary repair scratches etc. complete

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:

Centring and shuttering including strutting,propping etc. and removal of form for.

Providing and fixing on wall face unplastidsed-PVC(working pressure 4kgf per sqm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing on wall face unplasticised -PVC molded fittings / accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

Providing average 150mm thick dry rammed khoa beaten to112mm (compacted with water) made of well burnt or jhama bricks including ramming properly till compacted thickness is achieved, curing and carriage of water with all leads, making proper slope and blinding the top with cement mortar(1:10) all complete as per building specification and direction of E/l,

Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete.

12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement

Extra for providing and fixing wind ties of 40x6mm flat iron section.

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

Carriage of Materials

Stonechips-

Coarse Sand-

Cement Local -

Brick Local -

Difference Cost of Material

Cement -

Seigniorage Fees

Basic Rate