REPAIR/REPLACEMENT OF PLUMBING SANITARY FITTINGS FIXTURE AND REPAIR TO CERTAIN BUILDING AT TAMULPUR AND DARRANGA UNDER GE RANGIA

Amount

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as per specified and as directed by Engineer-in-charge.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as per specified and as directed by Engineer-in-charge.

Taking up or down 25 or 32 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as per specified and as directed by Engineer-in-charge.

S&F 15 mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as per specified and as directed by Engineer-in-charge.

S&F 20 mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as per specified and as directed by Engineer-in-charge.

S&F 25 mm bore Galvanized Steel tubes, medium grade water supply pipes etc., fixed to walls and ceilings or laid in floors, complete all as per specified and as directed by Engineer-in-charge.

Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.), complete all as per specified and as directed by Engineer-in-charge.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.), complete all as per specified and as directed by Engineer-in-charge.

Refixing old steel tubing of 25 or 32 mm bore and connections in new or old position (walls, ceilings, floors etc.), complete all as per specified and as directed by Engineer-in-charge.

S&F in repair rotational moulded polyethylene water storage tanks 3/multi layered ISI Marked (cylinderical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position incl dismantling existing tanks, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair rotational moulded polyethylene water storage tanks 3/multi layered ISI Marked (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position incl dismantling existing tanks, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 25 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 20 mm dia ball valve, PTMT high pressure of epoxy coated Aluminium rod and high density plastic ball (200 gms), screwed for iron pipes or brasas ferrule, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 25 mm dia ball valve, PTMT high pressure of epoxy coated Aluminium rod and high density plastic ball (200 gms), screwed for iron pipes or brasas ferrule, complete all as per specified and as directed by Engineer-in-charge.

Taking down Chowkhats or frames with shutter (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each ., complete all as per specified and as directed by Engineer-in-charge.

M&L for Soild PVC moulded Door frame of size 50 mm x 47 mm made out of 5 mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing

M&L for factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing frame at site as per specification, complete all as per specified and as directed by Engineer-in-charge.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as per specified and as directed by Engineer-in-charge.

S & F 100 mm long Butt hinges heavy weight , cold rolled mild stainless steel and fixed complete all as per specified and as directed by Engineer-in-charge.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as per specified and as directed by Engineer-in-charge.

Taking down cement motar plaster on brick or stone wall etc, including raking out joints, hacking for key, scrubbing down with water etc., complete all as per specified and as directed by Engineer-in-charge.

Demolition of brick work built in cement mortar incl all quoins,arches,pillars etc but excluding ashlar facing , dressed stonework and precast concrete articles , complete all as per specified and as directed by Engineer-in-charge.

M&L for brick work with sub class B old size bricks straight or curved on plan 6m mean radius in cement mortar 1:6, complete all as per specified and as directed by Engineer-in-charge.

M&L brick work with subclass ‘B’ bricks (Old size brick) Straight or curved on plan to any radius built in CM (1:4) as in half brick thick wall, complete all as per specified and as directed by Engineer-in-charge..

M&L 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even & smooth without using extra cement complete all as per specified and as directed by Engineer-in-charge.

M&L 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even & smooth without using extra cement complete all as per specified and as directed by Engineer-in-charge.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash.complete all as per specified and as directed by Engineer-in-charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat alkali resistant priming paint applied over 2 mm thick wall care putty finished even and smooth on wall all as specified and directed by Engg-in-charge. .

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing rubbish off the site, complete all as per specified and as directed by Engineer-in-charge.

M&L Coloured non skid ceramic tiles 8 to 10 mm thick (Square/ rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6. completed all as specified and as directed.

M&L for Coloured Glazed ceramic tiles 450 x 350 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 10 mm thick rendring layers in CM 1:4 , complete all as per specified and as directed by Engineer-in-charge.

S&F in repair wash hand basin vitreous china ,flat back of size 550x400 mm with chain and plug including cutting for pinning in ends brackets and including of PVC connection, waste pipe , waste coupling and CP pillar taps 15 mm etc complete all as specified and directed.

S&F in repair fancy type designer wash hand basin vitreous china ,flat back of size 550x400 mm with long pedestal including cutting for pinning in ends brackets and including of PVC connection, waste pipe , CP waste coupling and designer CP Pillar taps 15 mm etc complete all as specified and directed.

S&F in repair stainless steel sink without drainage board made of stainless steel of 1.0 mm thick for kitchen with plugs, washer and wastes including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mm x420mm and bowl size 410mm x 330mm x 160 mm, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair sink with drainage board made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair kitchen plate rack made of stainless steel 1 mm thick of size 900 x600x250 mm, complete all as per specified and as directed by Engineer-in-charge. Make - Prayag , Nirali , A-one, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 32 mm bore dia of discharge pipe waste coupling of PTMT (minimum 45 gm weight) (half or full threaded), complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 15 mm bore fancy type chromium plated bib cock with wall flange copper alloy screwed down high pressure with crutch or butter fly handle screwed both end for iron pipe (quarter turn) , complete all as per specified and as directed by Engineer-in-charge.

S&F in repair pillar taps cast copper alloy with capston heads chroumium plated fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed of 15mm dia bore, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 15 mm bore brass CP wall mixer for mixing hot & cold water (Exposed Straight legs) with telephonic shower arrangement & Crutch (without hand shower and hoses) arrangement screwed down for iron pipe, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 15 mm bore CP basin mixer for mixing hot & cold water with capstin head screwed down high pressure with or with out littered 'H' or 'C' with long screwed shank and fly nuts screwed down for iron pipe, complete all as per specified and as directed by Engineer-in-charge.

Disconnecting existing tanks exc. 500 L and not exc.1000 L, setting aside (or lowering if required) for water tanks, dewatering, cleaning, sterilisation and removing all dirt, scale and algae formation from inside the tank by using lab tested cleaning chemicals all as per specified and as directed by Engineer-in-charge. including fixing Stickers mentioning "TANK CLEANED ON" with date, month and year. The stages of cleaning process of tanks are as follows :- (a) To drain out the water by using exit valve or high capacity dewatering system. (b) Cleaning all the algae formation inside the tank by using TERBAC G5 / NB-10 / INCHLOR-5 lab tested branded chemical and scrubbing the walls of the tank by mechnised scrubber. (c) Fresh water cleaning by high speed jet pump. (d) Drying the tank then first stage of bacteria screening and sterilization of the tank by using TERBAC G5 / NB-10 / INCHLOR-5 lab tested branded chemical. (e) Cleaning the floor of the water tank by heavy duty industrial vacuum cleaner. (f) Second stage of bacteria screening and sterilization of the tank by using ultra violet ray ejector covering 360 degree within the tank and killing all suspended bacteria. (g) Third stage of bacteria screening and sterilization of the tank floor by using TERBAC G65 / NB-60 / INOXI-60 lab tested branded chemical. Note - (i) The quoted rate shall include for removal of mud, grits and deposits etc. properly from site of work and on completion of work sterilisation certificate to be submitted to the Engineer-in-charge. (ii) Cleaning needs to be done mechanically by authorised dealer/agent as approved by Enginner-in-charge. (iii) Cleaning chemical shall also be approved by Engineer-in-charge.

All as per serial item No. 10 above but exceeding 1000 litre capacity.

S&F 2 in 1 Bib Taps 15 mm Bore, Cast Copper Alloy,with crutch or butterfly screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

S&F in repair CP health faucet shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 mtr long easy flex tube in chrome finish, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair brass CP Soap dish and fixed to plugs with chromium plated brass screws complete all as per specified and as directed by Engineer-in-charge.

S&F in repair CP towel rack 600 mm long between flanges & 225 mm wide with lower hanger, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair PTMT alloy single door cabinet with mirror of size 300 x 343 x 250 mm with inner shelves for holding bath/shaving kit complete all as specified and as directed by Engineer-in-charge.

S&F in repair fancy type curtain/hanger rods of mild steel pre painted with fixing decorative bracket .stops rollers etc included complete all as per specified and as directed by Engineer-in-charge.

S&F in repair PVC water storage tank cover including hinging device for tanks upto 500 lit capacity, complete all as per specified and as directed by Engineer-in-charge.

All as per item above but for 1000 litre capacity tank. , complete all as per specified and as directed by Engineer-in-charge.

S&F, brass chromium plated Tubular towel rail, 20 mm dia, D type 600 mm long between flanges complete all as specified.

S&F in repair CP towel-ring sqaure, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard & railing 60 cm long, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair bib tap of 15mm bore of standard PTMT (90 gm weight) of any colour a high pressure screwed for iron pipe and fixed, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 15 mm bore stop/angle valve, chromium plated screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions, complete all as per specified and as directed by Engineer-in-charge.

S & F in repair chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as per specified and as directed by Engineer-in-charge.

S&F PVC valveless, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 15mm dia PVC connection pipe with PTMT nuts of length 450 mm including taking down old unserviceable one, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair grating doom 100 mm size of PTMT (minimum weight 25 grms), complete all as per specified and as directed by Engineer-in-charge.

M&L PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) 40mm thick as in floor finished fair and even for laying of leveled bed, complete all as per specified and as directed by Engineer-in-charge.

Demolition of cement concrete (un-reinforced) of any description and in any position not orherwise specifically provided for , as required to facilate demolition work and dispositing off the rubbish materials where directed complete all as specified and as directed by Engr-in-Charge.

Dismantling AC sheets in roof coverings any type any thickness, complete all as per specified and as directed by Engineer-in-charge.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or screws J-type or cranked hook bolts.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/semi-corrugated (Trapezoidal) steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws alongwith washers etc complete all as specified and as directed by the Engg-in-charge.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks etc complete all as specified and as directed by the Engg-in-charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets, complete all as per specified and as directed by Engineer-in-charge.

S&F GI Powder coated snap grid frame work for false ceiling of grid size 600x600 mm comprising of 4 mm thick non Asbestos Cement fibre board of size (595x595)mm in a grid of GI system duly suspended with 2 mm dia GI wire fixed with iron purlins from the roof etc complete all as per specified and as directed by the Engg-in-charge.

S&F solid PVC wall panneling consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification, complete all as specified and as directed.

M&L for 4mm thick non asbestos fiber cement building board as per size required and fixed to timber frame on wall with nails/screws, complete all as specified and as directed.

5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as per specified and as directed by Engineer-in-charge.

M&L Second class soft wood plain fillets square, rectangular or triangular in section ,clean sawn , secured with nails or brads face sectional area Exc 6 and not exceeding 13 Sqcm complete all as specified and as directed by the Engg-in-charge.

Taking down shutters of any description n.exc 1.00Sqm each , complete all as specified and directed.

Taking down chowkats with shutters of any description not exceeding 1.50Sqm each with shutters (without without taking off shutters from the frames), complete all as specified and directed. (Note: Disturbed area must be plastered and match with existing colour/putty)

S&F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. for windows and ventilators etc provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) complete all as per specified and as directed by Engineer-in-charge.

Taking down chowkats with shutters of any description exc 1.50Sqm but n.exc. 4.00Sqm each with shutters (without without taking off shutters from the frames), complete all as specified and directed. (Note: Disturbed area must be plastered and match with existing colour/putty)

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, and also one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed by the Engg-in-charge.

S&F for 35mm thick second class hardwood glazed and skeleton shutters divided into squares with plain, chamfered or rounded, mitred and rebated sash bars for door open rebated and prepared to receive glass,gauze, etc., edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause8.24 (a) (Bottom 250mm, stiles 100mm, top 120mm & lock rail 160mm wide) complete all as specified and directed.

M&L for 2nd class hard wood in plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,supplied and fixed, complete all as per specified and as directed by Engineer-in-charge.

S&F MS wire cloth 0.56mm nominal dia wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples fixed to any frame, complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not therwise described and treated with two coat of creosote oil.

S&F PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube fixing in opening as per specification & drawing all as specified and directed.

S&F factory made soild panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togehter with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and directed.

S&F 100 mm long Stainless steel butt hinges medium weight clod rolled and fixed.

S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section.

S&F 200 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

M&L for Preparation of newly untreated wood or wood base surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying two coats of Synthetic Enamel paint over a coat of zink chromate primar primer.

S&F in repair MS wire cloth 0.56mm nominal dia wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples fixed to any frame, complete all as specified and as directed.

M&L for APP based polymeric membrane by forced (torched) application ( minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm), land on roof surface after proper cleaning and application of specified primar,complete all as specified.

M&L for removing any loose materials/oil/dust by wire brush or by appropriate cleaner, from the sheet of the roof surface, placing ThermaCote Roof Repair Tape as per size required (area not exc 225Sqcm), removing/ release coating from the inward facing of the tape and pressing by hand and applying final coatover it to get leakege repaired.

S&F in repair, 250mm long brass helical door spring of approved quality, ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F in repair, Aluminium Die cast body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.

S&F in repair aluminium alloy anodized 300mm sliding door bolt with hasp staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy length of bolt 300mm, complete all as specified and directed.

S&F in repair butt hinges cold rolled mild steel 100mm long medium weight fixed to angle iron chowkat including making good etc, complete all as specified and directed.

S&F in repair 200 mm long Aluminium, anodised, barrel tower bolts of extruded section.

S&F in repair extruded aluminium alloy handles fabricated type 150mm size, complete all as specified and as directed.

S&F in repair double legged door stopper of size 150mm of aluminium alloy with rubber complete all as specified and as directed.

S&F in repair curtain rods with MS anodised aluminium alloy conduit pipe curtain rod 19mm dia stove enamelled with , incl all necessary fixing brackets, complete all as specified and as directed.

Demolition of reed, lathing, single or double, incl battens and plaster or chicken wire lathing, complete all as specified and as directed.

M&L, 10 mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete block surfaces finished even and smooth without using extra cement.

M&L for preparing new plastered surfaces and applying two coats of cement base paint over a coat of chalk whitening on surfaces of walls.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat alkali resistant priming paint applied over 2 mm thick wall care putty finished even and smooth on wall all as specified and directed by Engg-in-charge. .

Vitrified Ceramic tiles of light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6. completed all as specified and as directed.

Vitrified Ceramic tiles of light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed or bedding layers in CM 1:4. completed all as specified and as directed.

M&L for Providing precast cement concrete 1:2:4 Ty-B1( using 20mm aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in CM 1:6 complete with joints to match.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane.complete all as specified and as directed.

M&L mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as per specified and as directed by Engineer-in-charge.

M&L mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality confirming to Fe-410-S 0r Fe-410-O complete all as per specified and as directed by Engineer-in-charge..

S&F in repair vitreous china wash down water closet pan, (pedestal pattern) white, including seat cover, closed pattern with flat bottom and cover with chromium plated hinging device complete all as per specified and as directed by Engineer-in-charge.

S&F in repair vitreous china wash down cistern mounted water closet pan, single piece, couple closet (pedestal pattern) white of size 360mm x 680mm x 765mm, S trap of 220mm including seat cover, closed pattern with flat bottom and cover with chromium plated hinging device complete all as per specified and as directed by Engineer-in-charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

OM CONSTRUCTIONS

M/S KIRAN ENTERPRISE

M/s Nice Traders