Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 02₹14,000Accepted-AOC 338 GHORPADE PETH PUNE 411042 | PUNE | MAHARASHTRA | 411042 | ₹14,000 | 02 | Accepted-AOC accepted |
| 2 | 03₹14,100Accepted-AOC | ₹14,100 | 03 | Accepted-AOC accepted |
| 3 | 04₹14,498Accepted-AOC | ₹14,498 | 04 | Accepted-AOC accepted |
| 4 | 05₹1.5 LAccepted-AOC SHREE SADGURU CONSTRUCTION VASAI | VASAI | MAHARASHTRA | ₹1.5 L | 05 | Accepted-AOC accepted |
| 5 | 01₹13,500Rejected-AOC | ₹13,500 | 01 | Rejected-AOC rejected |
| Sl No | Description | Qty | Unit | shubha laxmi enterprises | Shree Sadguru Construction | DWARKA CONSTRUCTION | OVI CONSTRUCTION | RAJ ENTERPRISES | rathore bhagyajeet and co. |
|---|---|---|---|---|---|---|---|---|---|
| 1.00Description | |||||||||
| 1.01 | Rate (Year 2023-2024) | 1 | 1 Nos | - | 1 ₹1 | - | - | - | - |
| 1.02 | Providing and constructing protection wall to land including all provision (excavation, rubble saling, M-15 P.C.C, Uncoursed rubble masonary U.C.R, Tuck pointing, with cement mortar 1:3, M.20 R.C.C coping, Brick masonary with cement mortar 1:6, sand face palster, HCRM/CRS (Corrsian resistant steel) and dispoising of excavated sail up to 3 km) | 1 | RMT | 14,498 ₹14,498 | 1,46,333 ₹1.5 L | 14,100 ₹14,100 | 14,000 ₹14,000 | 14,000 ₹14,000 | 13,500 ₹13,500 |
| 1.03 | Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S. Angles (50 mm x 50 mm x 6 mm) at 2.5 metres centre to centre including excavating pits for foundation, fixing posts in cement concrete of size 45 x 45 x 45 cm, fastening the wire and painting the M.S. Angles with one coat of red lead primer and two coats of painting etc. complete Note :- (for specification refer drawing no 2) | 1 | RMT | 1,039 ₹1,039 | 11,333 ₹11,333 | 1,030 ₹1,030 | 1,040 ₹1,040 | 1,000 ₹1,000 | 300 ₹300 |
| 1.04 | Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete
Note :- (for specification refer drawing no 3) | 1 | RMT | 3,150 ₹3,150 | 32,333 ₹32,333 | 3,000 ₹3,000 | 3,150 ₹3,150 | 2,900 ₹2,900 | 1,000 ₹1,000 |
| 1.05 | Providing, constructing and erecting mild steel grill gate for compound wall including all provision (excavation,Dewatering,Rubble,soling,Pcc M-10. TMT - FE - 500 bar,Rcc footing,Column,Sand face plaster,mild steel gate,structural steel)
Note :- (for specification refer drawing no 4) | 1 | Nos | 84,000 ₹84,000 | 1,54,333 ₹1.5 L | 1,49,000 ₹1.5 L | 15,000 ₹15,000 | 1,45,000 ₹1.4 L | 1,50,000 ₹1.5 L |
| 1.06 | Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150 mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. | 1 | SQM | 3,960 ₹3,960 | 4,333 ₹4,333 | 3,800 ₹3,800 | 4,000 ₹4,000 | 3,700 ₹3,700 | 2,800 ₹2,800 |
| 1.07 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete | 1 | MT | 1,25,000 ₹1.3 L | 1,28,333 ₹1.3 L | 1,20,000 ₹1.2 L | 1,26,200 ₹1.3 L | 1,00,000 ₹1 L | 1,50,000 ₹1.5 L |
| 2.01 | Rate (Year 2024-2025) | 1 | 1 Nos | - | 1 ₹1 | - | - | - | - |
| 2.02 | Providing and constructing protection wall to land including all provision (excavation, rubble saling, M-15 P.C.C, Uncoursed rubble masonary U.C.R, Tuck pointing, with cement mortar 1:3, M.20 R.C.C coping, Brick masonary with cement mortar 1:6, sand face palster, HCRM/CRS (Corrsian resistant steel) and dispoising of excavated sail up to 3 km) | 1 | RMT | 15,950 ₹15,950 | 1,61,333 ₹1.6 L | 15,510 ₹15,510 | 15,050 ₹15,050 | 15,000 ₹15,000 | 14,850 ₹14,850 |
Tender Value
Refer Docs
EMD Value
₹12.5 L
Closing Date
15 Mar 2023, 3:00 pmClosed
Deputy eng
vvcmc
Appoint Registered Contractor on the panel for the work of protecting the VVCMC properties for the triennial years of 2023 24 2024 25 and 2025 26 in VVCMC area B-2 Tender
2023_VVCMC_879203_1
VVCMC/PWD/2022-23
Open Tender
Civil Works
1095 days
vvcmc
Please refer Tender documents.
3 documents required · 3 mandatory
₹3,540
₹12.5 L
23 Apr 2026
1 Mar 2023
16 Mar 2023
1 Mar 2023
15 Mar 2023
1 Mar 2023
Description
Rate (Year 2023-2024)
Providing and constructing protection wall to land including all provision (excavation, rubble saling, M-15 P.C.C, Uncoursed rubble masonary U.C.R, Tuck pointing, with cement mortar 1:3, M.20 R.C.C coping, Brick masonary with cement mortar 1:6, sand face palster, HCRM/CRS (Corrsian resistant steel) and dispoising of excavated sail up to 3 km)
Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S. Angles (50 mm x 50 mm x 6 mm) at 2.5 metres centre to centre including excavating pits for foundation, fixing posts in cement concrete of size 45 x 45 x 45 cm, fastening the wire and painting the M.S. Angles with one coat of red lead primer and two coats of painting etc. complete Note :- (for specification refer drawing no 2)
Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete Note :- (for specification refer drawing no 3)
Providing, constructing and erecting mild steel grill gate for compound wall including all provision (excavation,Dewatering,Rubble,soling,Pcc M-10. TMT - FE - 500 bar,Rcc footing,Column,Sand face plaster,mild steel gate,structural steel) Note :- (for specification refer drawing no 4)
Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150 mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt.
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete
Rate (Year 2024-2025)
Providing and constructing protection wall to land including all provision (excavation, rubble saling, M-15 P.C.C, Uncoursed rubble masonary U.C.R, Tuck pointing, with cement mortar 1:3, M.20 R.C.C coping, Brick masonary with cement mortar 1:6, sand face palster, HCRM/CRS (Corrsian resistant steel) and dispoising of excavated sail up to 3 km)
Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S. Angles (50 mm x 50 mm x 6 mm) at 2.5 metres centre to centre including excavating pits for foundation, fixing posts in cement concrete of size 45 x 45 x 45 cm, fastening the wire and painting the M.S. Angles with one coat of red lead primer and two coats of painting etc. complete Note :- (for specification refer drawing no 2)
Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete Note :- (for specification refer drawing no 3)
Providing, constructing and erecting mild steel grill gate for compound wall including all provision (excavation,Dewatering,Rubble,soling,Pcc M-10. TMT - FE - 500 bar,Rcc footing,Column,Sand face plaster,mild steel gate,structural steel) Note :- (for specification refer drawing no 4)
Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150 mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt.
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete
Rate (Year 2025-2026)
Providing and constructing protection wall to land including all provision (excavation, rubble saling, M-15 P.C.C, Uncoursed rubble masonary U.C.R, Tuck pointing, with cement mortar 1:3, M.20 R.C.C coping, Brick masonary with cement mortar 1:6, sand face palster, HCRM/CRS (Corrsian resistant steel) and dispoising of excavated sail up to 3 km)
Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S. Angles (50 mm x 50 mm x 6 mm) at 2.5 metres centre to centre including excavating pits for foundation, fixing posts in cement concrete of size 45 x 45 x 45 cm, fastening the wire and painting the M.S. Angles with one coat of red lead primer and two coats of painting etc. complete Note :- (for specification refer drawing no 2)
Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete Note :- (for specification refer drawing no 3)
Providing, constructing and erecting mild steel grill gate for compound wall including all provision (excavation,Dewatering,Rubble,soling,Pcc M-10. TMT - FE - 500 bar,Rcc footing,Column,Sand face plaster,mild steel gate,structural steel) Note :- (for specification refer drawing no 4)
Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150 mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt.
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.95 MB
1.pdf
Tender Documents • 5.15 MB
BOQ_1531036.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid