Supply, Delivery and Fixing of 120 W LED Street Light Fittings with 7m Octogonal Pole at koladi Ground to Ayyabakkam Junction in ward no.4 in Thiruverkadu Municipality

Providing foundation block for fixing street light pole including earthwork excavation of size 0.60x0.60x0.60 and plain Cement concrete 1:2:4 mix , of size 0.60x0.60x0.60 and 4 nos of M16 x 450mm rods 450mm height including cost and conveyance of all materials to site and all other incidential charages and labour charges for watering and curing etc.complete as per specification.

Supplying , erection and commissioning of 7m Free Standing Single Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3 mm The pole should be hot dip galvanized confirming to BESN ISO-1461 with thickness of 65 Micron including labour charges for errection and fixing with required materials etc.complete as per standard specification and as per the instructions of Departmental officers. SOR 25-26 pg-259

Supply and delivery of 120W LED Street light fittings with minimum 300mm length of 3 core 1sq.mm copper cable and IP66 Male connector complete as per technical Specification Elec SOR 25-26 SD-459

Supply and laying of 4 core 16 sqmm pure armoured UG cable including cost and conveyance to site and including earth work excavation , refilling and cable laying and including all incidential charges etc.complete as per standard specification and as per the directions of Departmental officers.

Suoying and delivery Kiosk type pillar box of size 1220mmx914mm x 356mm made up of 14 SWG sheet moulded on 4 Nos of 40mm x 6 mm L TYPE M.S.Angle of 762 mm height with one No of 100 amps TPN Neutral Link fuse unit 3 Nos of 100 amps fuse unit molded on the wooden plank and 63 amps fuse unit three numbers per phase and 7/16 pvc unsheeted Copper wire from metre to 100A fuse Unit, 100 A fuse unit to TPN switch and TPN switch to Aluminium bus bars and 3 nos of aluminium bus bars of size 30 mm x 6 mm for three phase abd 1 No of Aluminium bus bar of size 25mm x 6 mm for neutral and 2 Nos of earthing with gauge G.I.Wire of 1.5 m long including earth work for size 0.30 x 0.30 x 0.045 and sand filling 15 cm thick and pcc 1:2:4 size 0.30 x 0.30 x 0.50m for four legs including Timer Switch with cost and coveyance of all material to site and labour charges etc complete.

Supply and fixing of 45 od HDPE black house with clamp set for fixing the pipe etc,complete

Supply and fixing of 2 core 2.50 sq mm Copper cable from pole switching point to light fittings