Maintenance work (Drain cleaning, Surface dressing, Jungle cleaning road marking painting, whitewash and other miscellaneous work) along S.K. road (From L.G. rotary to Swarn nagari rotary) for three years, Greater Noida.

Excavation in foundation in ordinary soil (Loam clay or sand) including lift upto 1.50 M and lead upto 30.00M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer incharge upto a distance of 30m from the foundation trenches (where machine con not reach/move) (SOR/251 (A)/4.1.1)

Add to items (251-253) for every additional 30M (100ft.) lead or part of 30m (100ft.) or for every additional 1.50M. (5ft) lift or part of 1.50M. (5ft.) (SOR-20/254(A)/4.04)

Cartage of earth or fly ash when added to schedule item no. 253 : 1st Km. (if lead is beyond ½ Km) SOR-20/261(b))

Cleaning jungle including up rooting of rank, vegetations grass, push, wood trees and samplings of grith upto 30cms. measured at a height of 1 M. above ground level and removal of rubbish up to a distance of 50M. Out side periphery of area cleared. (SOR-20/259(i))

Same as above 259(i) above but grass only (SOR-20/259(a)

Tractor with trolley including POL & driver. (SOR-20/S.No-19/Chapter-2)

Supply of labour. ( Based on SOR-20/SN-12/Chapter-2)

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.

All kinds of soil (DSR-18/2.28.1/AR)

Tractor with trolley including POL & driver. (SOR-20/S.No-19/Chapter-2)

Supply of labour. ( Based on SOR-20/SN-12/Chapter-2)

Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR-20/279) Same as above item no 279 but with 2cm gauge stone grit instead of 4cm gauge stone ballast. (SOR-20/279(a)

Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. paint to be used should confirm ISI no. 105/106/133-1950 (SOR-20/647/15.07)

M-150 brick work in 1:6 cement & fine sand 1.25 FM mortar in foundation and plinth including supply of all material labour and T&P etc required for proper completion of the work. (SOR-20/303) same as item no 303 but in 1:4 one cement & four fine sand of 1.25 F.M. mortar. (SOR-20/305) Same as item no 305 but in 1:4 one cement & four coarse sand of 2.20 F.M. mortar. (SOR-20/305(A))

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) (DSR-18/13.4.2)

Plain/Reinforced Cement concrete in open foundation complete as per Drawing and Technical Specifications. (MORTH-20/9.06/E/Case-II)

RCC Grade M-25 using batching plant transit mixture and manual placing (MORTH-20/9.06/E/Case-II)

Steel reinforcement for RCC work including straightening cutting bending placing in position and binding all complete upto plinth level

Thermo Mechanically treated bars of grade Fe-500D or more. (SAIL Steel) (DSR-18/5.22.6/AR)

Tractor with water Tanker with cost of water including P.O.L. (SOR-20/SN027/Chapter-2)

Supply and fixing SFRC cover over chamber (with out frame). 50mm thick.

size 600x600mm (heavy duty)

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : (DSR-18/18.33)

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (DSR-18/18.33.1)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (DSR-18/10.25)

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (DSR-18/10.25.2)

Providing JCB with driver and including POL (SOR-20/S.No31/Chapter-2)

Hiring of protable RE-cycle jetting cum suction machine mounteed on mahindra bolero maxi with hydraulically operate man-Hole De-silter upto depth of 15 meter with driver for the area of Greater Noida. As directed by Engineer in-charge for 8.50 Hours perday overtime will be paid on pro-Rate basis. pressure 3000PS (min) with 15mtrs suction head and jetting water capacity of 2000 litres. Rate as per Noida.

Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost) (DSR-18/16.85)

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). (DSR-18/16.69)

White washing one coat including supply of all materials, labour, Tools & Plants etc. required for proper completion of the work. (SOR-20/671/16.01)

Road marking with Hot applied Thermoplastic compound with reflectorising Glass beads on Bituminious surface Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, Rates are inclusive of all taxes, royalty etc. all T&P/machine material and labour required for proper completion of work. (SOR-2020/New item/Sr.No.19.01)

Supply of Dewatering Pump 10 HP (MORTH Sno-109, Chapter-20/P746)

Labour cess and GST will be paid extra as per Govt. orders.