REPAIR MAINT OF STEEL AND WOODEN FURNITURE ITEMS OF VIKRAM VIHAR AND ANUJ VIHAR UNDER BSO SOUTH OF GE SOUTH DELHI CANTT 10

Amount

Note:- 1:- Removal of Existing components of following MES Pattern Furniture Item's Carefully without disturbing the adjoining parts and S&F New Components of same pattern as per drg in lieu of dismantled /discarded components including tighting the joints, pinning ,screwing, wedging, gluing, providing hinges, placing every part in - tact condition. 2:- Cleaning, derusting of stain/dirt with grinder machine /sand paper making the surface smooth filling the holes with putty whereever required and applying two coats of French Polish for wooden Items and one coat of synthetic enamel for Steel Item's as directed. 3:-.Replaced/ changed parts should be First finished seperately upto the level /extent so that the painting /polishing on whole Items should be matched and desired finish shall be obtained. 4:-Work shall be executed in Furniture yard of BSO's Sub Division.

BED HARD STEEL (Drg No. FD/E6/MAP/08 (R)

Removing of old and unsv Ply top from Hard Bed and S&F new 12 mm thick plywood of suitable size, ISI marked, (Make:-Greenply/Archid ply/Duro/Kitply) BWR phenol bonded commercial plywood with suitable size nut and bolts all as shown on drawing and as directed.

Removing of old unsv particle board from Head and Foot board of bed and S&F new Head and Foot board made from 18 mm thick pre laminated particle board Exterior Grade Type Make:- Greenply/Archid ply/Duro/Action Tesa/Kitply) with suitable size screw all around side of board shall be covered with 1mm thick PVC beading /Edging fixed with suitable adhesive complete all as directed.

Removing of old unsv stiffner of Hard Bed and S&F New stiffner made from 25mmx25mm sq MS Pipe 18 Gauze dully painted with synthetic enamel black all as directed

Removing of old unsv Rusted Legs and S&F new Legs made from 38mmx38mm sq MS Pipe 18 Gauze dully painted with synthetic enamel black all as directed

Welding to broken joints of Hard Bed complete all as directed .

Removing of old unsv Rubber Shoes and S&F new Hard Rubber Shoes as per sample approved rest all as directed.

Removing of old unsv Nuts of long rail and S&F New Nuts all as specified in drawing and directed.

Removing of the dirt and rust from old painted surfaces and applying one coat of black synthetic enamel paint all as specified and directed .

TABLE BED SIDE (MAP) (Drg No. FD/E6/MAP/15 (R)

Removing of old unsv particle board from Top/Bottom/sides/ Front side of Drawer and S&F new Top/Bottom/sides/ Front side of Drawer made from 18 mm thick pre laminated particle board Exterior Grade Type (Make:- Greenply/Archid ply/Duro/Action Tesa/Kitply ) with suitable size screw all around side of board shall be covered with 1mm thick PVC beading /Edging fixed with suitable adhesive complete all as directed.

Removing of old unsv BackPly of Table Bed Side and S&F New Ply 12 mm thick BWR grade (Make:- Greenply/Archid ply/Duro/Century/Kitply) of suitable size dully fitted with screw and adhesive complete all as directed.

Removing of old unsv Ply of Drawer Table Bed Side and S&F New Ply BWR grade (Make:- Greenply/Archid ply/Duro/Century) of suitable size dully fitted with screw and adhesive complete all as directed.

Removing of old unsv Teakwood runner and S&F New Teakwood runner with suitable size screw and adhesive complete all as directed.

Removing of old unsv Telescopic channel and S&F New Stainless Steel Telescopic Channel ISI Marked as approved by Garrisson Engineer) with suitable size screw and adhesive complete all as directed.

Removing of old unsv Handle and S&F New Stainless Steel handle dully fixed with suitable size screw complete all as directed.

Removing of old unsv Legs and S&F New Legs made from 18 mm MS Square Pipe 18 Gauze dully painted with black colour synthetic enamel complete all as directed.

Removing of old unsv rubber shoe and S&F New Hard Rubber/PVC Shoe complete all as directed.

Removing of the dirt and rust from old painted surfaces and applying one coat of black synthetic enamel paint all as specified and directed .

TEAPOY VERANDAH (Drg No. FD/E6/MAP/17)

Removing of old unserviceable top of table & S&F new table top of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam/Kitply) duly post -formed with 0.6mm thick laminate in colour/shade as approved by GE 0.8 mm thick PVC edging of shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine as specified and directed.

Removing of old unsv missing 5 mm dia MS Bar and S&F New 5 mm dia MS Bar dully painted with black colour synthetic enamel complete all as directed.

Removing of old unsv rubber shoe and S&F New Hard Rubber/PVC Shoe complete all as directed.

Removing of the dirt and rust from old painted surfaces and applying one coat of black synthetic enamel paint all as specified and directed .

TABLE COMPUTER (Drg No. FD/E6/MAP/03

Removing of old unserviceable top of table & S&F new table top of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam/Kitply) duly post -formed with 0.6mm thick laminate in colour/shade as approved by GE 0.8 mm thick PVC edging of shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine as specified and directed.

Removing of old unsv sides and S&F new sides made from 18 mm thick pre laminated particle board Exterior Grade Type (Make:- Greenply/Archid ply/Duro/Action Tesa/Kitply) all around side of board shall be covered with 1 mm thick PVC beading /Edging fixed with suitable adhesive complete all as directed.

Removing of old unsv Tray for Key board and S&F new sides made from 18 mm thick pre laminated particle board Exterior Grade Type I (Make:- Greenply/Archid ply/Duro/Action Tesa/Kitply) all around side of board shall be covered with 1 mm thick PVC beading /Edging fixed with suitable adhesive complete all as directed.

Removing of old unsv Drawer and S&F new Drawer made from 18 mm thick pre laminated particle board Exterior Grade Type I (Make:- Greenply/Archid ply/Duro/Action Tesa) all around side of board shall be covered with 1 mm thick PVC beading /Edging fixed with suitable adhesive complete all as directed.

Removing of old unsv CPU/UPS Box Shelf and S&F new CPU /UPS Box Shelf made from 18 mm thick pre laminated particle board Exterior Grade Type I (Make:- Greenply/Archid ply/Duro/Action Tesa) all around side of board shall be covered with 1 mm thick PVC beading /Edging fixed with suitable adhesive complete all as directed.

Removing of old unsv Telescopic channel and S&F New Stainless Steel Telescopic Channel ISI Marked as approved by Garrisson Engineer with suitable size screw and adhesive complete all as directed.

Removing of old unsv knobs and S&F Knobs all as specified and directed by the Engineer-in-Charge

Removing of the dirt and rust from old painted surfaces and applying one coat of black synthetic enamel paint all as specified and directed .

Removing of old unsv rubber shoe and S&F New Hard Rubber/PVC Shoe complete all as directed.

CHAIR COMPUTER (Drg No. FD/E6/MAP/01)

Removing of old unsv Tapestry Cloth from chair and S&F new Tapestry Cloth with new PVC Lipping all around it complete all as specified and directed.

Removing of old unsv Handle and S&F New Black PU Handle all as specified and directed by the Engineer-in-Charge

Removing of old unsv seat and back PU foam and S&F New seat & back PU Foam all as specified and directed.

Removing of old unsv seat and back ply and S&F New seat & back Ply 12 mm Hot pressed all as specified and directed .

Removing of old unsv Pedestral Assembly complete with castor wheel and S&F New Metalic Pedestral Assembly complete with castor wheel all as specified and directed .

Removing of old unsv Castor Wheel and S&F New Castor Wheel made from superior quality as per approved sample by Garrisson Engineer all as specified and directed .

Removing of old unsv PVC back Sheet cover and S&F New PVC back Sheet cover including setting the tilting Mechanism of Chair all as specified and directed .

Removing of old unsv Hydralic System and S&F New Hydralic System of ISI Marked as approved by Garrisson Engineer all as specified and directed .

CHAIR WRITING (Drg No. FD/E6/MAP/12)

Removing of old unsv Tapestry Cloth from chair and S&F new Tapestry Cloth rate of Tapestry cloth should be not less than 120/- per meter with new PVC Lipping all around it complete all as specified and directed.

Removing of old unsv Handle and S&F New Black PU Handle all as specified and directed .

Removing of old unsv seat and back PU foam and S&F New seat & back PU Foam all as specified and directed .

Removing of old unsv seat and back ply and S&F New seat & back Ply 12 mm Hot pressed all as specified and directed .

Removing of the dirt and rust from old painted surfaces and applying one coat of black synthetic enamel paint all as specified and directed .

Removing of old unsv Rubber stopper and S&F New Hard Rubber Stoper complete all as directed.

RACK SHOE STEEL (Drg No. FD/E6/MAP/02 (R)

Removing of old unsv missing MS Bar and S&F New 5 mm dia MS Bar dully painted with black colour synthetic enamel complete all as directed.

Welding to broken joints of Rack Shoe Steel complete all as directed .

Removing of the dirt and rust from old painted surfaces and applying one coat of black synthetic enamel paint all as specified and directed .

Removing of old unsv rubber shoe and S&F New Hard Rubber/PVC Shoe complete all as directed.

BIN LINEN MULTIPURPOSE (Drg No. FD/E6/MAP/09)

Removing of old unsv Top / Bottom and S&F new Top / Bottom made from 18-19 mm thick pre laminated particle board Exterior Grade Type (Make:- Greenply/Archid ply/Duro/Action Tesa/Kitply) all around side of board shall be covered with 1 mm thick PVC beading /Edging fixed with suitable adhesive complete all as directed.

Removing of old unsv sides and S&F new sides made from 18 -19 mm thick pre laminated particle board Exterior Grade Type (Make:- Greenply/Archid ply/Duro/Action Tesa/Kitply) all around side of board shall be covered with 1 mm thick PVC beading /Edging fixed with suitable adhesive complete all as directed.

Removing of old unsv front of Drawer/sides and S&F New Front of Drawer/sides made from 18-19 mm thick pre laminated particle board Exterior Grade Type I (Make:- Greenply/Archid ply/Duro/Action Tesa/Kitply) all around side of board shall be covered with 1 mm thick PVC beading /Edging fixed with suitable adhesive complete all as directed.

Removing of old unsv Door of Shelf and S&F New Door of Shelf made from 18 mm thick pre laminated particle board Exterior Grade Type I (Make:- Greenply/Archid ply/Duro/Action Tesa) including new piano type Stainless steel Hinges all around side of board shall be covered with 1 mm thick PVC beading /Edging fixed with suitable adhesive complete all as directed.

Removing of old unsv Shelf and S&F New Shelf made from 18 mm thick pre laminated particle board Exterior Grade Type I (Make:- Greenply/Archid ply/Duro/Action Tesa) all around side of board shall be covered with 1 mm thick PVC beading /Edging fixed with suitable adhesive complete all as directed.

Removing of old unsv Handle and S&F New Stainless Steel handle dully fixed with suitable size screw complete all as directed.

Removing of old unsv Magnetic Clatcher and S&F New Magnetic Clatcher dully fixed with suitable size screw complete all as directed.

Removing of old unsv Back Ply and S&F New Ply 12 mm BWR Grade (Make:- Greenply/Archid ply/Duro/Century/Kitply) of suitable size dully fitted with screw and adhesive complete all as directed.

Removing of old unsv Legs and S&F New Wooden Reacangle base made from 25mm x 100mm First Class Hard Wood Teak dully polished and Fitted to Bottom with 100 mm inner to all external sides with suitable size screw complete all as directed.

CHAIR DINNING (Drg No. FD/MAP-II/05)

Removing of old unsv/broken Front Legs and S&F New First Class Teak Wood Front Legs dully polished complete all as directed.

Removing of old unsv/broken Rear Legs and S&F New First Class Teak Wood Rear Legs dully polished complete all as directed.

Removing of old unsv/broken Stiffner and S&F New First Class Teak Wood Stiffner dully polished complete all as directed.

Removing of old unsv/broken Front/Rear/sides Rail and S&F New First Class Teak Wood Front/Rear/sides Rail dully polished complete all as directed.

Removing of old unsv/broken ply of seat and S&F New ply of seat 12 mm thick BWR Grade complete all as directed.

Removing of old unsv Foam of seat and S&F New Foam of seat 75 mm thick Density 40( Make:- Sleepwell/Kurlon/Reliance) dully covered with superior quality rexine cover rate not less than 120/-per meter sample as approved by Garrisson Engineer complete all as directed.

Removing of old unsv Cover of seat and S&F New Cover of seat of superior quality rexine cover rate not less than 120/-per meter sample as approved by Garrisson Engineer complete all as directed.

Removing of old polish from wooden surface of chair with Grinder machine and suitable type sand paper filling the holes with putty making the surface smooth then apply two coat of French polish complete all as directed.

Removing of old unsv/broken nylon buffer and S&F New Nylon Buffer complete all as directed.

HAT STAND WITH MIRROR (Drg No. FD-233, 361)

Removing of old unsv/broken/faded mirror and S&F New Electro copper plated 05 mm thick Looking Mirror (Make:- Saint Gobain, Atul,Modigaurd) complete all as directed.

Removing of old unsv Front ply and S&F New Front Ply 03 to 04 mm thick Teak ply ( make Greenply/Archid ply/Duro/Action Tesa/Kitply) all as specified and directed .

Removing of old unsv Back ply and S&F New Back Ply 04 mm thick both side commercial BWR Grade ( make Greenply/Archid ply/Duro/Action Tesa/Kitply ) all as specified and directed .

Removing of old unsv Teak wood beading from all around of Hat Stand and S&F new beading 6mmx35mm thick complete all as specified in drawing and directed .

Removing of old unsv Pegs and S&F new Stainless Steel Pegs dully fixed with suitable size screw complete all as directed.

Removing of old polish from wooden surface with Grinder machine and suitable type sand paper filling the holes with putty making the surface smooth then apply two coat of French polish complete all as directed.

Stool Dressing (Drg No. FD/E6/MAP/14)

Removing of old unsv/broken Legs and S&F New First Class Teak Wood Legs dully polished complete all as directed.

Removing of old unsv/broken Stiffner and S&F New First Class Teak Wood Stiffner dully polished complete all as directed.

Removing of old unsv/broken Top Rail and S&F New First Class Teak Wood Top Rail dully polished complete all as directed.

Removing of old unsv Foam of seat and S&F New Foam of seat 75 mm thick Density 40( Make:- Sleepwell/Kurlon/Reliance) dully covered with superior quality rexine cover sample as approved by Garrisson Engineer complete all as directed.

Removing of old polish from wooden surface with Grinder machine and suitable type emery paper filling the holes with putty making the surface smooth then apply two coat of French polish complete all as directed.

Peg Table (Drg No. FD-236, 277, 384)

Removing of old unserviceable top of table & S&F new table top of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam/Kitply) duly post -formed with 0.6mm thick laminate in colour/shade as approved by GE 0.8 mm thick PVC edging of shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine as specified and directed.

Removing of old unsv legs and S&F of new legs of first class teak wood.

Removing of old unsv top long rail and S&F of new top long rail of first class teak wood.

Removing of old unsv short rail and S&F of new short rail first class teak wood.

Removing of old unsv PVC rings and S&F new PVC rings.

Removing of old polish from wooden surface with Grinder machine and suitable type sand paper filling the holes with putty making the surface smooth then apply two coat of French polish complete all as directed.

Table Center (Drg No. FD-235, 274)

Removing of old unserviceable top of table & S&F new table top of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam/Kitply) duly post -formed with 0.6mm thick laminate in colour/shade as approved by GE 0.8 mm thick PVC edging of shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine as specified and directed.

Removing of old unsv legs and S&F of new legs of first class teak wood.

Removing of old unsv top long rail and S&F of new top long rail of first class teak wood.

Removing of old unsv top short rail and S&F of new top short rail first class teak wood.

Removing of old unsv stiffner and S&F of new stiffner of first class teak wood.

Removing of old unsv PVC rings and S&F new PVC rings.

Removing of old polish from wooden surface of chair with Grinder machine and suitable type sand paper filling the holes with putty making the surface smooth then apply two coat of French polish complete all as directed.

Teapoy (Drg No. FD-278, 382)

Removing of old unserviceable top of table & S&F new table top of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam/Kitply) duly post -formed with 0.6mm thick laminate in colour/shade as approved by GE 0.8 mm thick PVC edging of shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine as specified and directed.

Removing of old unsv legs and S&F of new legs of first class teak wood.

Removing of old unsv top long rail and S&F of new top long rail of first class teak wood.

Removing of old unsv short rail and S&F of new short rail first class teak wood.

Removing of old unsv PVC rings and S&F new PVC rings.

Removing of old polish from wooden surface of chair with Grinder machine and suitable type sand paper filling the holes with putty making the surface smooth then apply two coat of French polish complete all as directed.

Table Writing (Drg No. FD-275)

Removing of old unserviceable top of table & S&F new table top of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam/Kitply) duly post -formed with 0.6mm thick laminate in colour/shade as approved by GE 0.8 mm thick PVC edging of shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine as specified and directed.

Removing of old unsv legs and S&F new legs of first class teak wood.

Removing of old unsv top long rail and S&F new top long rail of first class teak wood.

Removing of old unsv top short rail and S&F new top short rail first class teak wood.

Removing of old unsv stiffner and S&Fnew stiffner of first class teak wood.

Removing of old unsv lock and S&F new brass lock size 50 mm make:-godrej/link/harrison as approved and directed

Removing of old unsv knobs and S&F new stainless steel knobs as approved and directed.

Removing of old unsv door and S&F new door of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam/Kitply) with 4mm thick Teakwood Beading shall be fixed on four sides with strong bonded chemical adhesive as specified and directed .

Removing of old unsv sides of box S&F new sides of box of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam/Kitply) with 4mm thick Teakwood Beading shall be fixed on four sides with strong bonded chemical adhesive through hot pressed machine as specified and directed .

Removing of old unsv back ply of box and S&F new back ply 12 mm BWR grade both side commercial as approved as directed.

Removing of old unsv sides of Drawer and S&F new sides of drawer of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam/Kitply) with 4mm thick Teakwood Beading shall be fixed on four sides with strong bonded chemical adhesive as specified and directed .

Removing of old unsv PVC rings of legs and S&F new PVC rings.

Removing of old polish from wooden surface of chair with Grinder machine and suitable type sand paper filling the holes with putty making the surface smooth then apply two coat of French polish complete all as directed.

Table Dinning 06 person (Drg No. FD-239, 273, 376, FD/MAP-II/03)

Removing of old unserviceable top of table Dinning 06 Person & S&F new table top of Table Dinning 06 Person of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam/Kitply) duly post -formed with 0.6mm thick laminate in colour/shade as approved by GE 0.8 mm thick PVC edging of shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine as specified and directed.

Removing of the old unsv legs & S&F new legs of teak wood for table dinning 06 person to the shape & size, duly french polished complete all as specified and shown on drawing .

Removing of the old unsv upper long rail & S&F new upper long rail of teak wood for table dinning 06 person to the shape & size, duly french polished complete all as specified and shown on drawing .

Removing of the old unsv upper short rail & S&F new upper short rail of teak wood for table dinning 06 person to the shape & size, duly french polished complete all as specified and shown on drawing .

Removing of old unsv PVC rings and S&F new PVC shoes.

Removing of old polish from wooden surface of chair with Grinder machine and suitable type sand paper filling the holes with putty making the surface smooth then apply two coat of French polish complete all as directed.

Sofa Set Five Seater complete (Drg No. FD-281, 373, MAP-II/02)

Removing of old unsv front legs and s&f new front legs made from first class teak wood as per drg.

Removing of old unsv rear legs and s&f new rear legs made from first class teak wood as per drg.

Removing of old unsv front rail of three seater sofa and s&f new front rail made from first class teak wood as per drg.

Removing of old unsv front rail of single seater sofa and s&f new front rail made from first class teak wood as per drg.

Removing of old unsv side rail of single seater,three seater and s&f new side rail made from first class teak wood as per drg.

Removing of old unsv wooden bearear of single seater sofa and s&f new wooden bearear made from first class teak wood as per drg.

Removing of old unsv wooden bearear of three seater sofa and s&f new wooden bearear made from first class teak wood as per drg.

Removing of old unsv wooden batten of single seater/three seater sofa and s&f new wooden batten made from first class teak wood as per drg.

Removing of old unsv arm rest of sofa set and s&f new arm rest made from first class teak wood as per drg.

Removing of old polish from wooden surface of Sofa set 5 Seater with Grinder machine and suitable type sand paper filling the holes with putty making the surface smooth then apply two coat of French polish complete all as directed.

Removing of old unsv upholstry of Each Set of Sofa set 5 Seater and S&F New Upholstry of Cushion Rate of upholstry not less than 150/- per meter colour and quality as approved by Garrisson Engineer .

Charpoy Folding (Drg No. FD-388 (R)

Removing of old unsv ply of Charpoy and S& F new plywood 08 mm thick BWR Grade Both side commercial Make:-( Archid ply, Green ply ,Century ,Duro ,Kitply ) with suitable size screw and bolts all as specified as per Drg.

Painting of with Synthetic Enamel as per Drg.

Removing of Old unsv Hard Rubber Shoes and S&F New Hard Rubber Shoes as per Drg.

CHARPOY WITH HARD TOP (Drg No. FD/MAP-II/01)

Removing of old and unserviceable Ply top from Charpoy with hard top and S&F of new 12 mm thick plywood of suitable size,(Make:-Greenply/Archid ply/Duro/Kitply) BWR phenol bonded commercial plywood with suitable size nut and bolts all as shown on drawing and as directed.

Welding to broken joints of Charpoy complete all as directed .

Removing of old unsv MS plate from legs of charpoy and S&F of New Plates of size 32x32x5mm at bottom of legs and under which 3 mm thick rubber Sheet fixed with Adhesive.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

SMS Enterprises