RENOVATION OF VIGILANCE DEPARTMENT IN RWRDC INCLUDING CIVIL and ELECTRICAL WORKS

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

PAN No.:

Service Tax Registration No

Goods and Service Tax ID No.

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2024 of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rs.

Pls Enter Turn over in Rupees for all the 3 years

ESI & PF Nos with proof

Remarks if any

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

DECLARATION II

Pls Accept the Delaration II

HAL/RC/WAC/R-07/24-25

RENOVATION OF VIGILANCE DEPARTMENT IN RWR&DC (INCLUDING CIVIL & ELECTRICAL WORKS)

29AAACH3641R1Z3

Description

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

PAN No.:

Service Tax Registration No

Goods and Service Tax ID No.

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2024 of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rs.

Pls Enter Turn over in Rupees for all the 3 years

ESI & PF Nos with proof

Remarks if any

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

DECLARATION II

Pls Accept the Delaration II

Specification

Providing and laying Vitrified tiles in floor / skirting with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 500x500 mm complete as per direction of Engineer-in-charge.

Providing -15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) complete as per direction of Engineer-in-charge.

Providing and applying internal wall and ceiling painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50grams/ litre after applying white cement based putty of average thickness 1mm over the plastered wall surface including preparation of the surfces, with a coat of low VOC primer with emery paper to bring to smooth and even including applying additional coats wherever required to achieve even shade and colour of approved brand, complete as per direction of Engineer-in-charge.

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators,and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, filling up the gaps at junctions, with dash fasteners and EPDM rubber/neoprene gasket, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. With pin headed glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) along with EPDM rubber / neoprene gasket etc. all complete as per the architectural drawings and the directions of engineer-in-charge .

Providing and fixing 150mm long aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of Engineer in Charge.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete as per direction of Engineer in Charge.

Providing and fixing125mm dia aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of Engineer in Charge.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete as per direction of Engineer in Charge.

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete as per direction of Engineer in Charge.

Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand for storage cabinet etc. including necessary nails, screws etc. complete as per direction of Engineer-in-charge.

Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydrarlic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 40 mm etc., all complete as directed by Engineer in Charge.

Providing and fixing 100mm chromium plated brass handles with necessary screws etc. complete as directed by Engineer in Charge.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type etc., all complete as directed by Engineer in Charge.

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer-in-charge.

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm and second class teak wood beading 62X19 mm etc., complete as per directions of Engineer-in-charge.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : etc., all complete as directed by Engineer in Charge.12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) complete as per direction of Engineer in Charge.

Providing and fixing 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make, with non decorative veneering on both sides, including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in-Charge.

Providing and fixing M.S. structural steel frames for roof covering/ colums purlins etc.,. including priming coat with approved steel primer all complete.

Supplying and Fixing of "SUNLOCK / PRESTER / HILUX or other equivalent" delux model 100mm width fabric washable scotch guard horizontal blinds using powder coated aluminium channel and fittings with complete accessories including capping on both sides etc., all complete as directed by the Engineer-In-Charge.

Removing the existing Al door , resetting and refixing the same with all fittings and fixtures , as directed by Engieer-in-Charge.

Supplying and fixing 8 way(4+24) double door , Surface/Recess mounting, vertical type, 415V, TPN MCB didtribution board of sheet steel, dust protected, duly powder painted, inclusive of 200A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs with wall cutting and finishing as required.

Providing and fixing 125A, 36KA, FPMCCB with thermomagnetic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel, making connections etc, as required

Supply and fixing 16 A rating , 240/415V, 10kA, "C" curve, miiniature circuit bracker suitable for inducive load of Single Pole in the existing MCB DB complete with connections, testing and commessioning etc., as required.

Supply and fixing 32 A rating , 240/415V, 10kA, "C" curve, miiniature circuit bracker suitable for inducive load of Single Pole in the exesting MCB DB complete with connections, testing and commessioning etc., as required.

Supplyting and fixing 6 way, double door, single pole and neutral, sheet steel, MCB distribution board, 240V, in Surface/Recess, complete with tinned copper busbar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earting etc with wall cutting and finishing as required

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium along with medium class 20mm PVC conduit,PVC bends, PVC Couplers, iron staples/saddles/screws, PVC junction box, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Light points

Exhaust/Wall mounting Fan points

Wiring for submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed along with medium class 20mm PVC conduit, PVC bends, PVC Couplers, iron staples/saddles/screws, PVC fastener etc with wall cutting and and making good finish as required

3 Runs x 2.5 sq. mm

3 Runs x 4 sq. mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections b etc. as required.

3 pin 6A Socket outlet

6 pin 16A Socket outlet

6A Switch

16A Switch

Supplying and fixing of follwing size/modules GI box along with modular base and cover plate for modular switches and PVC Fastener in recess etc including cutting the wall and making good finish.

2 Module

3 Module

6 Module

8 Module

3.5 CX 50 Sqmm Aluminium armoured Cable of approved make.

Supplying and making end termination with brass compression gland and aluminium lugs for 3.5CX50Sq.mm of PVC insulated and PVC shielded/XLPE aluminium conductor cable of 1.1KV grade as required

Supply, installation, testing and commissioning of 36W (2' x2') recess mounted LED Panel light fixture including chain links for installation

Supply, installation, testing & commissioning of 250mm dia modular exhaust fan of any approved make with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge.

Supplying and fixing 32A industrial Plug and socket along with 20A MCB in sheet steel enclosure on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commisioning etc. as required

Supplying and drawing 3x6sqmm of FRLS PVC insulated copper conductor, single core cable in the existing surface as required

Supplying and installing 225mm width X 59 mm dwpth X 1.6mm thickness of perforated hot dipped galvanised iron cable tray with perforation not more than 17.5% in convenient sections, joined with connectors including GI bolts and nuts, etc as required

LAN Points

Supply & fixing of RJ 45 LAN Point (Dual) RJ 45 (CAT 6A) socket outlet of approved make.

Supply & drawing of Cat-6 Lan cable

Telephone

Twin RJ 11 Telephone jack (Telephone Socket Outlet)

5 Pair 0.5mm unarmored telephone cable

Cable Laying ( UP to 35Sqmm)

Rupees Ten Lakh Sixty One Thousand Eight Hundred Seventy Eight and Fifty One Paise Only

Approximate Amount Put to Tender

Rupees One Lakh Ninety One Thousand One Hundred Thirty Eight and Thirteen Paise Only

Rupees Twelve Lakh Fifty Three Thousand Sixteen and Sixty Five Paise Only