GE/863/EWS-T-66 OF 2021-22

Amount

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specifed and as directed.

S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers, in roof walls etc with grade of zinc coating 275 complete all as specifed and as directed

S&F Pre- painted galvalume aluminum zinc coating , GI based corrugated steel sheet, 0.50mm thick of any colour ,having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specifed and as directed

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet ,0.50mm thick, of any colour having tensile strength of 550 Mpa ,as in roof covering/cladding to wall, fixed with self tapping screws complete all as specifed and as directed

S&F for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corruggations side lap fixed with coach screws and washers in roof, wall etc complete all as specified and directed.

Dismantling wroght iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W , grade 250, quality A , including cleats,distance pieces etc complete all as specified and directed.

M&L for two coats synthetic enamelled paint over one coat of red oxide primer incl preparation of new surface of steel of any description over 10cm width or girth complete all as specifed and as directed

M&L for one coats synthetic enamelled paint incl preparation of old steel surfaces of any description over 10cm width or girth complete all as specifed and as directed

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed.

M & L 4 mm thick Ply wood, grade BWR, type BB fixed with nails to timber frame work in ceiling ( flat or sloping) etc complete all as specified and directed.

M & L 4 mm thick Ply wood, grade BWR, type BB fixed with nails to timber frame work in partitions/ shutters, wall etc complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section, in any positions as in framed work complete all as specified and directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc under 40 sqcm in section complete all as specified and directed.

M&L 2nd class hard wood in scantling timber framed work, fixed clean sawn, complete all as specified and directed.

S & F Second class hard wood plain fillets, wrought, square, rectangular or triangular in section, secured with screws, cross sectional area exceeding 3 Sqcm and not exceeding 6 Sqcm complete all as specified and directed.

S&F anodised aluminium snap grid frame work for false ceiling of size of grid 605 x 605 mm complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60mm long and expansion hold fasteners 12.5 mm dia. 40mm long complete all as specified and directed.

S&F non asbestos fiber cement building board 10 mm thick , decorative finish fixed to aluminium or MS galvanised snap grid frame work with screw in ceiling complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 sqm each with shutters without taking off shutters from the frame, including iron/aluminium mongery and removing from site, including cutting holes for taking out hold fasts and making good disturbed protion in cement mortar (1:3) or PCC 1:2:4 type B1 (after inserting new hold fast if required), compete all as specified and as directed. Note:(Hold fast shall be measured and paid seperately).

Taking down chowkhats or frames exc 1.5 sqm but not exceeding 4 sqm each with shutters without taking off shutters from the frame, including iron/aluminium mongery and removing from site, including cutting holes for taking out hold fasts and making good disturbed protion in cement mortar (1:3) or PCC 1:2:4 type B1 (after inserting new hold fast if required), compete all as specified and as directed. Note:(Hold fast shall be measured and paid seperately).

M & L for second class hardwood clean sawn scantlings as in timber framed and fixed complete all as specified and directed.

S & F 30 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (b) complete all as specified and directed.

S & F Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each including iron/aluminium mongery and removing from site, complete all as specified and directed.

S & F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type, on both sides, complete, all as specified and directed.

S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed.

S & F Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 125 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 75 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21 complete all as specified and directed.

S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21 complete all as specified and directed.

S & F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F of aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specifed and as directed

M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

M&L preparation of old painted wooden surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality complete all as specified and directed.

S & F 20 mm dia., Aluminium alloy anodised curtain rails without brackets fixed in repair complete all as specified and directed.

S&F brackets for curtain rails fixed in repair complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floor, apron etc laid bedded and pointed in any morter complete all as specified and as directed .

M &L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) as in base to floors, complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc,set and jointed in neat cement slurry and pointed with white or colour cement to match tiles laid over and including 15mm thick screed in cement mortar 1:6 complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting on vertical surface etc,set and jointed in neat cement slurry and pointed with white or colour cement to match tiles laid over and including 10mm thick screed in cement mortar 1:4 complete all as specified and directed.

M&L for non skid ceramic white tiles 7 to 8 mm thick (square/ rectangular) area of each tile ,exc 0.06 sqm but not exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed with white or coloured cement to match tiles laid over and including 15mm thick screed in cement mortar 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350x250x7mm/450x350x7mm thick as in dado vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles laid over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 using 40mm stone aggregate as in sub base floor complete all as specified and directed.

S & F Chequered cement concrete tiles 300 mm x 300 mm x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurryaid over and including 20mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M&L 75 mm thick Cement concrete , type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections, finished even and smooth without using extra cement complete all as specified and directed.

M&L for providing, cement concrete ,Type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Demolition of precast concrete block walling masonary, built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of stone /boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Pre-cast cement concrete block masonary with solid blocks exc 10 cm in width and not exc 20cm in width in 1:3:6 type C-1 (using 20mm graded stone aggregate) and setting in cement mortar 1:6 complete all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and directed.

M&L for precast PCC 1:3:6 type C1 using 20mm graded stone agg as bond stones set in cement mortar 1:6 complete all as specified and as directed

Taking down cement plastering at any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed complete all as specified and directed.

M&L rendering 15mm thick on fair any type of faces of block masonary / concrete surfaces faces of concrete work in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick on fair faces of concrete work in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick on stone masonary surfaces in cement mortar 1:4 finishing even and smooth without using extra cement complete all as specified and directed.

M&L PCC (1:3:6) type C-1, using 20mm graded stone aggregate ,as in coping to rataining wall / drain complete all as specified and directed.

M&L for preparation of new plaster surfaces and applying 2 mm thick wall care putty on plastered wall surfaces and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for white washing three coats on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L for preparation of surfaces of new plaster surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old plastered surface of walls and applying one coat of cement base paint complete all as specified and directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L Precast reinforced cement concrete 1:3:6, type C1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed. Note: Reinforcement shall be measured and paid separately.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L Mild steel TMT 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for stirrups, hooping for columns, hooking ends and binding withincluding mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Dismantaling water tanks and removing from site exc 500 but n. exc 1000 ltrs complete all as specified and directed.

S & F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) tripple layered , duly provided with necessary fittings/fixtures for connecting inlet, outlet, washout and overflow pipes, hoisted including 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms / 25mm - 455 gms / 40mm - 690gms) complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 15 mm dia complete all as specified and directed.

S & F 15mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

All as per srl item no 77.00 here-in-above but fixing only old serviceable steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed. Note: Old serviceable steel tubing shall be used as obtained from item no 76 here-in before.

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 20 mm dia complete all as specified and directed.

S & F 20mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

All as per srl item no 80.00 here-in-above but fixing only old serviceable steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed. Note: Old serviceable steel tubing shall be used as obtained from item no 79 here-in before.

S & F in repair angle stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule , complete all as specified and directed.Make: MARC /ESS ESS /SS/ PRAYAG/CERA /JAQUAR/PRIMA/ESSCO/HINDWARE

S & f in repair bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule, complete all as specified and directed .Make: MARC /ESS ESS /SS/ PRAYAG/CERA /JAQUAR/PRIMA/ESSCO/HINDWARE

S & F in repair ,Pillar taps, cast copper alloy, with capstan heads, chromium plated,fancy type , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15mm bore iron pipe , complete all as specified and directed .Make: MARC /ESS ESS /SS/ PRAYAG/CERA /JAQUAR/PRIMA/ESSCO/HINDWARE

S&F Towel Rail 600 mm long of PTMT fixed with and including Chromimum plated brass screws and wooden or plastic cleats (Min weight 190 gms) complete all as specified and directed.

S&F in repair Rectangular glass shelf 500 x 125mm, including 02 Nos. chromium plated metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws, fixed in repairs, complete all as specified and directed. Make: Cat No. BEA-45 of PRAYAG or equivalent in ESS ESS, MARC, HINDWARE

S&F for PVC Connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repairs, first quality , Wash basins, vitreous china, white, flat back of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets, complete all as specified and directed. Make : CERA / HINDWARE/ PARRYWARE/ PRAYAG /JAQUAR

S&F in repair , PVC low level, white, flushing cistern, valve-less, symphonic action type, 10 litres capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connection to water supply pipe line and WC, complete all as specified and directed.Make : CERA / HINDWARE/ PARRYWARE/ PRAYAG /JAQUAR

S&F Vitreous China wash down water closet EWC (pedestal pattern), white (including fixing bolts, flushing cistern and flush pipe), plastic seat and cover white, closed pattern with flat bottom, mild steel chromium plated or anodised hinging devices, connected to drains outlet including chromium plated steel jet pressure unit, fixed as in repairs, and removal of old from site, complete all as specified and directed. Make : CERA / HINDWARE/ PARRYWARE/ PRAYAG /JAQUAR

S&F in repair PVC (SWR) floor trap , plain with chromium plated grating including jointing with solvent cement 75 mm dia complete all as specified and directed.

S&F grating doom 100 mm size of PTMT (min weight 25 grms) complete all as specified and directed.

S&F 32 mm dia low density polyethylene pipe (LDPE) of pressure rating @ 6Kg f per Square cm fixed to walls, ceilings or in floors etc. complete all as specified and directed.

S&F 50 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/ Sq. Cm., fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Demolition and breaking up drain pipes , 100 mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description & any position and not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in bedding including haunching & packing under and against the sides of pipe after they are laid and tested for 100 mm bore pipe complete all as specified and directed .

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed.

Returning filling in including spreading, levelling , watering and well ramming not exc. 25 cm in layers (Soil) complete all as specified and directed.

Removing excavated materials not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point , complete all as specified and directed .

S&F of 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like, over and including 20 mm thick screed bed or bedding layer of cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as sockets, switches ,ceiling rose, pendent holder, sketcth fitting & regulator etc including making good to the distrurbed surfaces of wall, roof and floor etc to match with the existing surfaces complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded ,1100 volts grade copper conductor cable unsheathed type, alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & incl PVC casing & caping with accessories heavy duty ,having ISI mark , fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc, all as speified for one light point / fan / Bell point controlled by one switch complete all as specified and directed.

All as per Srl item No 105 here-in-before but controlled with one multi pin socket outlet 5 Amp on independent board with other switches with cable 1.5 Sqmm complete all as specified and directed.

All as per Srl item No 105 here-in-before but controlled with one multi pin socket outlet 5 Amp on the same board with other switches with cables 1.5 Sqmm complete all as specified and directed.

All as per Srl item No 105 here-in-before but controlled with one multi pin socket outlet 15 Amp, independent board with other switches with cables 2.5 Sqmm complete all as specified and directed.

Supply and fixing switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed.

Supply and fixing socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type complete all as specified and directed.

Supply and fixing switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed.

Supply and fixing socket outlet 3 pin 15 Amp 2-in-one 230 Volt flush type complete all as specified and directed.

S&F in replacement of stepped type electronic fan regulator flush type, 1 module, complete all as specified and directed.

Supply & Fixing in replacement of Ceiling Rose, 3 phase polycarbonate isolated body including junction round pvc cover plat with brass screw/nuts complete all as specified and directed.

S & F lamp holder, PVC/ Polycarbonte type with back plate suitable for batten/pendant fittings complete all as specified and directed.

Supply and fixing in replacement LED Lamp 9 Watt in lamp (Bulb) holder complete all as specified .Make-Crompton Cat No. B22/E27-CDL or equivalent in wipro/Havells/Philips/Bajaj/SHAKTI .

Supply & fix in repair LED tube light fitting 1X 20 Watt white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver,LED strip,connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed. Make:- Crompton Cat No- LDL-20-CDL or equivalent in Bajaj/ Phillips/Havells/C&S/SHAKTI

Supply and fixing in replacement surface/ Wall mounted LED 10 W Bulkhead fitting, with IP65 protection, energy saving, all as specified and directed by Engg-in-Charge. Make: Crompton Cat No. LBHP-10-CDL or equivalent in Philips/Bajaj/Havells/ Shakti /C&S.

Supply and fix in replacement of factory made epoxy polyster powder coated distribution board, double door, SPN 8 way fabricated from minimum 1.6 mm thick CRCA sheet with double door (IP-65 protection) fixed flush to wall and standard 100 Amps DIN rail, earth bar and cable ties for cable management complete all as specified and directed and confirming to IS: 8623. Note: Cutting on wall and taking out old one and then flushing new DB and making all the connection as before and any accessories required to fix the DB including making good the disturbed surface is deemed to be included in quoted rate.

Supply and fixing in repair miniature circuit breaker (MCB), SPN, 40 AMP rating 240V, 10KA 'B' curve in the MCB DB complete with connection, testing and commissioning complete all as specified and directed.

Supply and fixing in repair 240V, 10 KA, 'B' curve, miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all complete as specified and directed.

M & L for Earthing in replacement / renewal complete with galvanised steel earth plate electrode 600x600x6.0mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR-I 2009, connected to main switch board all as specified and including testing on completion. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20 mm dia GI Pipe medium grade, funnel with wire mesh and lugs GI Pipe of 15 mm dia of light grade for protection of earth wire complete as specified and directed.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire, complete all as apecified and directed.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 10 Sqmm complete as specified and directed.

M&L for Dismantling house service brackets, any type complete as specified and directed.

S&F in replacement of house service bracket (hook type) with 3 metre long GI pipe 40mm bore medium grade, two nos 90 degree bends, MS hook and stay complete as specified and directed.

Note:- The total shall subject to adjustment of credit of Rs 57764.00 for old Materials as per Schedule of Credit.

A P ENTERPRISES