Rep.Overhauling of 15 KVA EA set Rep.of existing electrical wiring at TE Wishwanathpur , dismantling , refixing of partitioning wall/door of switch room to reduce cooling area at TE Khalilabad, Dismantling shifting of 1x40 KVA E/A set from Basti

(A) Dismantling,of 15 KVA E/A set and supply of following engine parts for overhauling purpose etc complete as reqd. 1. LINER

2. PISTON

3. PISTON RING

4. LINER ORING READ

5. CHAMBER PACKING

6. TAPED COVER Packing

7. HEAD GASKIT

8. CYLENCER PACKING

9. EXAUST PACKING

10. ANABOND

11. HOUSE PIPE CLEEP

12. CR BEARING

13. PISTON LOCK

14. FAN BELT

15. ALTERNATOR BELT

16. MINIFOLD PACKING

17. VALVE

18. VALVE GIDE

19. VALVE SEAL

20. Valve sheet

21. CR BUSH

22. old cooton

23. LUB OIL

25. SERVICE KIT FOR ELEMENT

26. AIR FILTER

27. PISTON PIN

(B) Labour charges for engine overhauling:-- 1. Transportation of engine parts such as crank shaft, connecting rods, cylinder heads, fuel pump, injectors etc. from Site to to workshop Basti and back to site i/c loading and unloading etc. complete as reqd.

2. Repairing of cylinder head i/c replacement of all defective parts with new, grinding,etc complete as required (Head Repairing Charges)

3. Repairing of fuel injector pump i/c replacement of faulty parts with new,replacement of element,i/c calibration etc complete as required.

4. Repairing and calibration of fuel injector, replacement of faulty parts with new etc complete as required.

5. Repairing & Overhauling charge of 15 KVA engine i/c replacement of faulty parts with new one i/c aliment testing with alternator i/c commissioning and testing on exchange/BTS load etc complete as required.

( C ) Labour charges for alternator repairing/ rewinding-- 1. Dismentalling & Disconnection of 15.0 KVA Alternator from Engine i/c Loading unloading and lifting with the help of labour & transpotation from site to Work Shop in Gorakhpur etc complete as required.

2. Repairing alternator 15.0 KVA alternator with the suitable thickness of insulated copper wire,proper varnishing I/c refixing of the same in alternator housing etc complete as required.

3. Loading unloading and lifting with the help of labour & transpotation from Work Shop in Gorakhpur to the site etc complete as required.

4. Refixing of the existing repaired alternator on the base channel i/c connection with the engine i/c aliment testing and testing of the alternator on load etc complete as required.

5. Less credit of old and recovered materials.etc complete as required.

( D ) EI work 1. Replacement of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (a) 4 way (4 + 12), Double door

2. Replacement of following rating,four pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) 63 Amp

3. Replacement of 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) Single pole

(b) Triple Pole

4. Replacement of conventional 40 w tube fitting with 20 W LED tube fitting i/c connection,testing etc .complete as reqd.

5. Replacement of 150 W pole light fitting with 45 W LED street light fitting i/c connection,testing etc .complete as reqd.

6. Supply and Fixing of 1200 mm sweep ceiling fan i/c regulator, connection, testing etc as reqd.

7. Supply and Fixing of electronic regulatorfor ceiling fan fan i/c connection, testing etc as reqd.

8. Replacement of 63 Amp 4 pole on load change over switch in sheet steel enclosure i/c connection, testing etc complete as reqd. (M/S HPL/Havells/S.s make)

09. Replacement of 63 Amp Kit Kat fuse unit i/c fixing, connection, etc complete as reqd. (M/S L&T/Havells/S.s make)

10. Supplying and fixing of 40/32 mm dia x 1.50 mtr long GI pipe (medium class) bracket for mounting of street light fitting on wall bending the pipe to the required shape2 nos 20 mm x 3 mm flat iron clamps with nuts and bolts and washers painting the flat iron with primer and finish paint etc as reqd.

11. Closing of open space created by dismantling of scrapped WAC units at various sites under OA basti with brick,cement & sand ,making good the damages,plastering etc complete as reqd.

12. Dismantling of existing aluminium partition wall, doors etc and refixing all the dismantled matterial to desired place i/c labour charges etc .complete as required. ( At TE Khalilabad)

13. Supply of additional required material for refixing of dismantled aluminium partitioning wall e.g.angle frame,clip,black rubber, J plate,screws etc complete as required. ( At TE Khalilabad)

14. Dismantling of 1 x 180 KVA E/A Set at TE Bldg. Khalilabad & taking it out of the bldg.

15. Dismantling of faulty 40 KVA E/A Set at TE/BTS Basti Kutchehary and taking it out of the bldg.

16. Transportation of 1 x40 KVA E/A Set from TE/BTS Basti Kutchehary to TE Khalilabad (Approx 40 Km) i/c loading and unloading with the help of crane & helpers etc complete as required.

17. Installation ,Testing & Commissioning of 1x40 KVA EA set at i/c adjustment,modification and fixing of silencer pipe etc complete as required.( 1x40 KVA at TE Khalilabad & 1x40 KVA at TE Siddharthnagar)

18. Dismantling of 1 x 100 KVA E/A Set at TE Bldg. Siddharthnagar & taking it out of the bldg.

19. Transportation of 1 x40 KVA E/A Set from TE/BTS Basti Kutchehary to TE Siddharthnagar(Approx.70 Km) i/c loading and unloading with the help of crane & helpers etc complete as required.

20. Providing technician for site visit/DG inspection at Basti Kutchery etc as required.

21. Running test of EA set on load for 1 Hr by providing required diesel & making connections properly on both ends of EA set etc.complete as reqd