M/o completed scheme under NA-II/SZ

Removal of SFRC Cover from its position placed over drain/rain water harvesting chambers and replacing the same at its position and stacking the same within the work area/up to 50 mtr lead i/c all T&P required complete as per direction of Engineer-in-Charge.

Removing silt by manual means in storm water drains (not exceeding 1.0 m in width), lift up to 1.0 m, including getting out the excavated silt/garbage and disposal of excavated silt/garbage, all complete as per direction of Engineer-in-charge, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a) 1:2:4 (1 cement : 2 coarse sand (zone-II) derived from natural sources : 4 graded stone aggregate 20 mm nominal sizederived from natural sources).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: a) Cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster of mix : a) 1:4 (1 cement : 4 coarse sand)

Neat cement punning.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100 mm c/c on both ways, neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick . 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

Add cost index @3% Item No. 3 to 8

Apply GST Correction Factor @0.973