Spl repair to VICT Sec, garage, driver rest room and parking area at BLO, Special repair to parking shed and drainage line of P-103 Building at NSRY (PBR) under GE Haddo, Sri Vijaya Puram

Amount

Dismantling of ceiling boarding including grid of any description fixed in any position with nails complete all directed.

S&F for anodoised aluminium powder coated snap grid frame work for ceiling 605mm x 605mm using aluminium anodoised sections aluminium section main tee 36.5x25x1.4mm, cross 23.5x26.4x1.4mm, angle 25x25x1.4mm including cutting, drilling jointing etc complete including 6mm dia of GI hangers wire suspenders fixed with adjustable connectors and providing 4mm thick E-boards (Classic) 605mm x 605mm size specified by Engr-in-charge.

Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.

M&L Chequered cement concrete tiles (glossy finish) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments in floors, over and Including 20mm thick screed bed in CM 1:6 etc all as specified and as directed.

M & L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) 75mm thick as in levelling course, sub-floors and paving etc complete all as specified & directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified

M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified.

M&L coloured non skid ceramic tiles 7mm to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified.

Ditto all as per item No 8 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specifed and directed

S&F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as directed.

Dismantling of mild steel work of any description not otherwise provided for complete all as specifed and directed

S&F for mild steel holdfast, bands, straps, bracket/ clamp for eves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls or floors etc using synthetic rubber adhesive cement solvent complete all as specified.

Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings N exc 15 cm thickness in any position and in any height not otherwise specifically provided, etc complete all as specified and as directed

M&L for cement concrete Type C-1, 1:3:6 (using 20 mm graded stone aggregate) in post foundation, foundation and mass concrete all as specified and directed

M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) all as specified and as directed.

M&L for Rendering 10mm thick CM 1:6 for finishing the surface even and smooth w/o using extra cement. Complete all specified and directed.

M&L for Rendering 10mm thick CM 1:4 for finishing the surface even and smooth w/o using extra cement. Complete all specified and directed.

M&L for rendering 15 mm thick cement plaster in CM 1:4 with WPC on fair faces of brick work or concrete surfaces at any height with neccesary scafoldings, finished even smooth without using extra cement etc complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces with 3mm average thick wall care putty and applying two coat of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed.

M&L for preparation on newly plastered external wall surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over treated surfaces.

M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etc and preparing surface with 3mm average thick wall care putty and applying two coats of oil bound distemper over one coat primer including filling of cracks, holes and including leveling the surface which undulation found with wall care putty etc. all as specified.

M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over treated surfaces.

S & F rolled sections as in post built up of one beam / channel or angle section with flanged plates, caps bases slices angle brackets cleats and other connections, conforming to Fe 410-w.(Gde-E-250 ) quality A complete all as specified and as directed.

S & F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, conforming to Fe 410-w.(Gde-E-250 ) quality A complete all as specified and as directed.

S & F for mild steel plates (plain or chequired) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde E-250) Quality -A complete all as specified and as directed.

M&L for aluminium wind tie of any size fixed with self tapping screw with integral EPDM washer in roof covering complete all as specified and directed

M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar complete all as specified.

M&L 18 to 20mm thick granite stone (of any type ) work (table rubbed and polished) in steps tread, riser, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including grinding and mirror polishing complete. (Note : Colour of granite shall be as approved by Engr-In-Charge)

M&L for Rounding to edges of stone slabs / Granites one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Taking down chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each complete all as directed.

Taking down chowkhats or frames with shutters without taking off shutters from frame n exe 1.5 Sqm each complete all as directed

M&L for preparation of newly plastered surfaces of wall by and applying two coats of cement based paint over one coat of primer all as specified.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators, partitions and their shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame work or doors etc all as specified and as directed.

Supply only plain sheet glass 4mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane complete all as specified and directed.

Supply only plain sheet glass 5.5 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum door shutter exc 0.5 Sqm in each pane complete all as specified and directed.

Supply only Aluminium alloy wire cloth 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc all as specified and as directed

S&F Factory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C' type GI or 40 x 20 x 19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing etc all as specified and as directed

S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 complete all as specified and directed.

S&F extruded aluminum alloy handle fabricated type powdercoated 150mm long complete all as specified and directed.

S&F Aluminum powder coated barrel tower bolt of extruded section 150mm long complete all as specified and directed.

S&F Aluminum alloy powder coated sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and directed.

S&F in repairs vitreous china counter wash hand basin flat back of size 550x 400 mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, waste pipe and all necessary inlet, out let connections complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts etc all as specified

S&F in repairs 15mm dia bib taps long body with flange cast copper alloy chromium plated fancy type with capstan head handle screwed down for Iron pipe or for brass ferrule etc complete all as specified and as directed.

S&F in repairs 15mm dia Swan neck Bib taps with flange cast copper alloy chromium plated fancy type suitable for kitchen sink or similar screwed down for Iron pipe or for brass ferrule etc complete all as specified and as directed Make: Cat No:1698 of Prayag or Equivalent in Parryware/Jaquar.

S&F in repairs 15mm dia Two way bib taps long body with flange cast copper alloy chromium plated fancy type with capstan head handle screwed down for Iron pipe or for brass ferrule etc complete all as specified and as directed.

S&F Health faucet (ABS Body) Fancy type mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs 15mm dia CP Angle cock with flange fancy type with capstan head handle screwed down for Iron pipe or for brass ferrule etc complete all as specified and as directed.

S&F Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed.

S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets etc complete all as specified and directed.

S&F in repairs Brass chromium plated tubular towel rail 20mm dia & 60 cm long between flange etc complete all as specified.

S&F in repairs Brass chromium plated tubular towel Ring fixed with screws etc complete all as specified.

S&F in repairs PVC connection 15 mm dia and 450 mm long with both and nuts complete all as specified and directed.

S&F in repairs 1mm thick Stainless steel sinks with drainage board in kitchen with waste coupling, plugs, washers and waste pipe fixed on granite platform, over all size 915 X460mm bowl size 410mm X 330mm X 160mm complete all as specified.

S& F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

S&F in repairs for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long bathroom / kitchen and fixed to wall complete all as specified and directed.

S&FLiquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed.

Excavation in post holes(or similar holes) each n. exc 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc exc 25 cm watering and removing surplus soil to a distance n exc 50 m and making good surface as in soft/loose soil complete all as specified and as directed.

M & L for brocken stone or boulder Hard core of gauge n exc 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

S&F for 160mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring including all fittings, bends joints fixed to walls or floors etc using synthetic rubber adhesive cement solvent complete all as specified.

Taking out scum/ sludge including water in a closed container and deposit in an earth pit of sufficient size and depth dug in any type of soil within Defence land where directed at a distance exc 250 and n.exc 500 mtrs, returning filling in after disposal of scum/ sludge, clearing the bushes, vegetation etc complete all as directed

M&L for Excavation in trenches n.exc. 1.5 wide and n.exc. 1.5 m deep and getting out in any type of soil complete all as specified and directed.

Returning, filling in soil incl levelling watering and well ramming in layers n.exc .25cm in fdn trenches complete all as specified and directed.

Removing excavated soil to a dist n.exc 50m and depositing where directed at a level n.exc.1.50m complete all as specified and directed.

M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & directed by Engineer-in-Charge.

M&L for cement concrete (1:2:4) Type B-2 (using 40mm graded stone aggregate) as in surface channels or drain complete all as specified and directed.

M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and directed

Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified.

M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping

M&L for Reinforced concrete pipes, class NP2, dia 300mm laid including Concrete bed to drain pipes including packing under, and haunching with cement concrete 1:3:6 type C-2 using 40mm graded aggregate against the sides of pipes after they are laid and tested with collars complete all as specifed and directed

S&F Framed work such as gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Dismantling structural steel work complete all as specified.

M&L for PCC (1:4:8) type D2 using 40mm graded aggregates) as in sub base 75mm thick complete all as specified and directed.

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials and making good disturbed surfaces of walls, floors, etc.

Taking down fuse Unit/DBs 415 Volt/230 Volt complete all as specified and directed.

Taking down old aluminium sub main wiring of any size complete all as specified and directed.

M & L point wiring complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLSH PVC insulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed/surface conduit of size not less than 20mm dia, with all necessary fittings, concealed in walls /roof/ floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-

Description same as per Srl item No 86 above but One light/fan point controlled by one switch 5 Amps one way.

Description same as per item Sl No 86 above but for two light point controlled by one switch 5 Amps one way complete all as specified and directed.

Description same as per Srl item No 86 above but, point wiring for 3 pin switch socket outlet, 6 Amps on independent board.

Description same as per Srl item No 86 above but, point wiring for 3 pin switch socket outlet , 6 Amps on same board .

All as per item No.86 above but point wiring with two single core 4.0 sqmm size cables and one 4.0 sqmm green colour cable as earth continuity conductor for one 6 pin 16 Amps socket out let on independent board.

S & F for switch modular type, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed.

S & F Switch modular type , flush type, single pole one way 15 amps all as directed.

S & F for socket outlet modular type 1 way 6 Amps, 3 pin, flush type 230 volts AC circuit complete all as specified and directed.

S & F Socket outlet 2 in 1 modular type, 3 pin, 5 and 15, flush type, universal all as directed. Make: Anchor /Cona/ Legrand.

S & F stepped type electronic fan regulator modular type complete all as specified.

Taking down carefully ceiling fan of any make, size from its location, dismantling complete, examine complete parts thoroughly, oiling, greasing all parts and complete overhauling of fan including replacement of small parts such as split pin, nut bolt, screws and assembling back the fan, make fully functional, re-fixing the fan to its position including replacing and providing of twin core copper wire 23/0.0076 from fan to ceiling rose and painting the fan with same colour of fan complete all as directed.

Supply and fixing of Decorative ultra slim linear LED lighting fixture of 18 Watt recess mounted 220V , 50Hz with Aluminium housing ,environmental friendly energy efficient fitting recess mounted round/square in shape , not less than 105lm/watt (Warm white/ white colour as per requirement of site complete) of light as required at site) complete all as specified and directed. NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting . Make - Philips Cat Part No : Dura Slim or equivalent make in CG/Havels /Luker. NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting.

Description all as item no 93 but 15 watt.

Supply and fixing of round/ square shaped surface mounted LED panel of cap 18 watt (of any colour of warm white and natural white), PDC aluminium housing and high translucent frosted plastic diffuser ,Efficacy: 100 lm/W all as specified and directed . Make- CG Cat No-LCDSPLN-R-18-CDL or equivalent to Philips, Havells

S & F 25 watts LED building security light fittings ASTRA NEO street lights are made up of pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection. Efficacy ≥ 110LPW including necessary fixing arrangements as per site requirements all as specified and directed by Engr In charge. Make : CG Cart Part No: LSTS-25-CDL-M or equivalent to Philips /Havells

S & F GI brackets of GI pipe light grade of size 25 mm dia including nuts, bolts and washers for building secufity light all as specified and directed

S & F Sub main wiring with PVC insulated FRLS cable 2 runs single core 4.0 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red/Yellow/Blue, Neutral- black and earth- green in and incl rigid PVC conduit concealed in wall (ISI marked) incl all specials like joint elbow, Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 4.0 sq mm for earth continuity all as directed.

Description all as item no 98 but 6.0 sqmm 2 core Note for item No 98 & 99 : 3 length of cable and one length PVC Conduit shall be measured and paid for one length.

Supply & fix motor starter switch of capacity 25 Amps working on 240 volts AC supply alongwith with 25 Amps mini MCB SP type 'C' 240 volts for air conditioner including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall complete all as specified and directed. Make:- Anchor (Roma) or equivalent in crabtree/ leader

S & F Triple pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 415 V, 50 Hz supply double door TPN DB system 04 ways and making good to the distrubed surface /walls all as specified and directed.

S & F single pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways and making good to the distrubed surface /walls complete all as specified and directed.

S & F MCB TPN 40-63 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

Supplying & fixing MCB SPN 40 Amps (`C’ series) having current rating 10 KA complete all as specified and directed .

Supplying & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

Earthing complete with galvanised earth plate electrode 60 cm x 60 cm x 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion. NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 451 & 452 of SSR Part-II. 2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.

Supply, laying, testing and commissioning of underground LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 4 core 25 sqmm (laid in trenches,ducts,pole,wall etc.) incl taking down old unsv cable all as specified and directed.

Supply and laying in trenches or in cable ducts or clamping on wall DWC HDPE pipe of size 40 mm (OD) x 32 mm (ID) along with connected accessories like couplers. bends, end caps etc. for LT cable protection all as specified and directed.

Sri Ram Construction (BID ID -3265824)

CHANDER SEKER ENTERPRISE (BID ID -3263509)

CARTWHEEL CONSTRUCTION (BID ID -3267088)

ANITA VARMA ENTERPRISES (BID ID -3263488)

M/s Saina Enterprises (BID ID -3263519)

SKV Engineering (BID ID -3265466)

M/s Ramesh Lal (BID ID -3264500)