8286 REPAIR AND MAINT TO CERTAIN BLDG AT INS TRATA AND OTHER AREA UNDER AGE BR II UNDER GE KUNJALI

Amount

Taking down shutters of any description n exc 1 sqm each complete all as specified and directed.

All as per Srl Item No 1 here in before but exc 1 sqm and n exc 2 sq.m each complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.

M&L for plain, solid, straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed of Second class hard wood complete all as specified and directed.

M&L for mild steel small articles such as clamps, hold fast, wind ties, bends, anchorage plate, clamps for holding RWP, brackets, suspenders for ceiling etc conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

M&L for plain framed, panelled shutters 40 mm thick ( any number of panels ), with panels of timber flat on both sides ( feather edged), or of venerred particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkhats of second class hard wood complete all as specified and directed.

M&L for 2nd class hard wood glazed and skeleton shutters of 35 mm thick , open rebated and prepared to receive glass, gauze, etc. divided in to quares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (a) ; supplied and fitted to chowkhats complete all as specified and directed.

Cutting holes in brick walls built in CM excd half brick but n.exc one brick for inserting holdfasts & making good dismantled portion in CM 1:3 or PCC 1:2:4 type B-1 and finishing to match the existing finish complete all as specified and directed.

M&L for preparation of new iron surfaces not exc 0.1 sqm each and applying tar or coal tar black paint to back of steel and iron works, such as gully gratings, holdfasts etc complete all as specified and directed.

S&F of butt hinges, medium weight, cold rolled mild steel of 100 mm long complete all as specified and directed.

S&F stainless steel butt hinges medium weight 100mm long complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section, 150mm long and fixed complete all as specified and directed.

S&F of aluminium handles, cast type anodised of 150 mm long complete all as specified and directed.

S&F aluminium alloy. anodised, sliding door bolt of 300 mm size with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

All as per Srl Item No 15 here in before but 250 mm long complete all as specified and directed.

S&F of aluminium handles, cast type anodised of 100 mm long complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section, 100 mm long and fixed complete all as specified and directed.

M&L for painting to wooden surfaces of any description , over 10 cm in width or girth, not otherwise described , including preparation of new surfaces with pink primer and two coats of synthetic enamel (ordinary tint) paint complete all as specified and directed.

S&F 150 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified.

S&F 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F in repairs fancy type drapery rods, powder coated aluminium of 20-25mm size with fixing brackets, Knobs rollers etc. complete all as specified and directed.

M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation new wooden surfaces exc 0.1 sqm & n.exc 0.50 sqm each and applying tar or coal tar black paint to back of chowkats complete all as specified and directed.

M&L for preparation treating small articles such as stop, covers gully grating, holdfasts, ends of post backs of chowkats, etc. area n.exc 0.50 sqm each and applying tar or coal tar black paint to back of chowkats complete all as specified and directed.

S & F factory made soled panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS Tube for top & bottom rails MS Frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm thick width struck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded sealed to the stiles & rails with suitable PVC sheet beading & joined together with solvent cement supplied & fixed in the frame at site as per specifications and drawing complete all as specified and directed.

M&L for solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening as per specifications & drawing complete all as specified and directed.

S&F aluminium alloy wire cloth 0.45mm nominal dia of wire & averge width of aperature 1.40mm & fixed with aluminium wire staples complete all as specified and directed.

S&F in repairs aluminium alloy wire cloth 0.45mm nominal dia of wire & averge width of aperature 1.40mm & fixed with aluminium wire staples/ suitable size 'U' channel etc complete all as specified and directed.

Taking up or down existing GI water tubing complete with all fittings of 15 mm bore complete all as specified and directed.

All as per Srl Item No 31 here in before but 20 mm dia bore complete all as specified and directed.

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed.

All as per Srl Item No 33 here in before but fixing only(pipe obtain under item No. 31).

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed.

All as per Srl Item No 35 here in before but fixing only (pipe obtain under item No. 32).

S&F in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 Ltr capacity with complete fittings, flush pipe & float valves,handle incl brackets etc complete all as specified and directed.

S&F in repairs vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including barckets complete all as specified and directed.

S&F 15 mm bore dia pillar taps, cast copper alloy , with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, etc complete all as specified and directed.

S&F 32mm dia waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 15 mm dia stop valves, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends complete all as specified and directed.

S&F 32mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls , ceilings or in floor etc. complete all as specified and directed.

S&F fancy type 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan ( pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe) but with & including plastic seat cover of approved colour with flat bottom , and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.

S&F in repairs vitreous china coloured full stall type urinal of coloured incl grating,waste pipe and brackets fixed complete all as specified and directed.

S&F in repairs urinal spreader of any type fixing with 15 mm dia GI pipe complete all as specified and directed.

S&F in repairs urinal spreader of any type fixing with 15 mm dia GI pipe complete all as specified and directed.

S&F in repairs Soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs aluminium anodised tubular towel rail 20mm dia including necessary aluminium brackets complete all as specified and directed.

S&F in repairs 15mm dia bore toilet hand pressed nozzle (Health Faucet) with 1 mtr long tube with CP wall bracket complete all as specified and directed.

S&F in repair of Stainless stee plate rack of size 60cm x 100cm in height made with stainless steel sheet of 20 gauge thick to key size as specified including fixing steel screws complete all as specified and directed.

S&F in repairs sheet glass shelf corner assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repairs Toilet paper holder of vitreous china (White) fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F in repairs gun metal gate valve with iron wheel head screwed both end iron pipe and fixed 20 mm bore complete all as specified and directed.

S&F in repair 3 way mixer shower (Hot and cold) fancy type chromium plated suitable for connected plumbing work complete all as specified and directed.

S&F in repairs Waste fittings, 40 mm brass, chromium plated for glazed ware sinks , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified and directed.

All as per Srl Item No 59 here in before but 32 mm dia

S & F in repairs SS grating 100 mm dia complete all as specified and directed.

S & F in repairs 20 mm dia brass Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Kitchen sinks with drainage board made of stainless steel 1mm thick (SS grade 304AISI 18/8 )IS embosed (IS:13983) glossy finish kitchen sink with plugs, washers and wastes Pipe 90 cm iong with CP waste coupling 40 mm dia ; in-cluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connect-ing union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M & L for providing and injecting chemical emulison for post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 liters per sqm of the vertical surface of the sub-structure to a depth of 300mm inculding excavating channel along the wall and rodding etc complete all as specified and directed.

Providing and injection chemical emulsion for post constructional antitermite treatment of soil under existing floor using chemical emulsion at the rate of one liter per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 Coarse sand) to match the existing floors complete all as specified and directed.

Providing and injecting chemical emulsion for post construction antitermite treatment of voids in masonary using chemical emulsion at the rate of one litre per hole, 300mm intervals inculding drilling holes at 45 degree and replugging them in cement mortar 1:2 (1 cement : 2 Coarse sand) to match the existing floor complete all as specified and directed.

Providing and injecting chemical emulsion for post construction antitermite treatment at the points of contact of wood by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle 45 degree at 150 mm centre to centre and sealing the same complete all as specified & directed.

S&F in repair vitreous china squatting pan 'Orissa' pattern size 580 x 440mm white with integral foot rest(excld flushing cistern & flush pipes) complete all as specified and directed.

S & F rotational moulded polythene water storage tank horizontal (Loft tank) fixed in position of 350 Ltr capacity including dismantling water tanks complete all as specified and directed.

M&L for cleaning removing all scal and dirt etc from tanks from mouth and circulating pipe 250 ltr to 500 ltrs

Disconnecting existing tanks, setting aside (or lowering of required) for repairs , cleaning, etc. and hoisting if required reconnecting and refixing in position repairing, etc. exc 250 but n exc 500Litre capacity complete all as specified and directed.

Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed.

S&F 110mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 75mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 110mm dia bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm dia bore PVC (SWR) bends any radius complete all as specified and directed.

S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm/100mm dia bore of pipe complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.09 sqm, including 15mm thick screed bed in CM (1:4) as under layer to receive tiles as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for (300 x 200 mm) x 7mm sized glazed coloured ceramic tiles over 10 mm thick backing plaster in CM 1:3 as in skirting/dado, set and jointed in neat cement slurry and painted in coloured cement to match the shade complete all as specified and directed.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness ( below or above ground level) & also removing the debris to the out side of MD land complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2, (using 40 mm graded stone aggregate) as in plinth protection, path, hard standing etc, finished even and smooth without using extra cement complete all as specified and directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class "B" bricks, straight or curved on plan exc 6 m mean radius , built in CM 1:6 complete all as specified and directed.

M & L brick work with sub class 'B' bricks shaight or curved on plan in half brick thick walls in CM 1:4

Cutting holes in brick walls built in CM excd half brick but n.exc one brick for inserting holdfasts & making good dismantled portion in CM 1:3 or PCC 1:2:4 type B-1 and finishing to match the existing finish.

Dismantling boarding , any description , fixed in any position with screws complete all as specified and directed.

M&L for 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in kitchen cabinet/cupboard shutters, built in cupboard etc complete all as specified and directed.

S&F 18/19mm thick particle board, Grade-2 quality Interior Gde commercial type fixed with nails to timber frame work incld 2nd class H/wood leaping after laminating complete all as specified and directed. (Note: Laminating & wdn lipping work would be measured & paid seperately)

M&L for 0.9mm thick decorative laminate Type-1 of surface finish, colour & pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F of Stainless steel standard quality butt hinges 75 mm long, fixed with screws complete all as specified and directed.

S&F of 40 mm dia. cup boards knobs fixed with nut , screw and washer of brass polished mild steel , bright finished complete all as specified and directed.

S&F standard quality magnetic catcher for cupboard shutters complete all as specified and directed.

M&L for plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads not exc 3 sqcm of 2nd class hard wood as in leaping complete all as specified and directed.

M&L for plain fillets, square, rectangular or triangular in section, clean sawn, secured with screws or brads exc 3 & n exc 6 sq cm of 2nd class hard wood complete all as specified and directed.

S&F of mild steel framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary , gussets plates, riveting , etc.; n exc 10 Kg each brackets, conforming to Fe-290, Gde-E-165 complete all as specified and directed.

Dismantling of stone slabs and tiles of andy description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills, cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for machine cut cudappah stone slab 20-25mm thick as in shelves, partition, etc. laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified & as directed.

Rounding to edges of stone slab one edge, such as in steps, cooking platform, and other similar situation complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base 20 mm in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water , etc. complete all as specified and directed.

Rendering 15 mm thick on other than fair face of brick/Concre surfaces of wall with CM 1:6 finished the surfaces even and smooth w/o using extra cement complete all as specified and directed.

M&L for 1 mm thick sagol finish on plastered surface of internal wall and ceiling etc complete all as specified and directed.

M&L for preparation of new plaster surface of wall and applying two coats of oil emulsion distemper over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for PCC 1:2:4 type B-1, using 20mm graded agg as in cills, copings, bed plates, and the like including weathering , slightly rounded or chamfered angles and throating, as directed

M & L rendering(15+5) 20 mm thick in CM (1:4) brick/concrete surface of walls finished the surfaces even and smooth & mixing of integral WPC in 2nd layer (5mm thick) etc complete all as specified and directed. (integral WPC measured separately).

Supply only integral waterproofing compound complete all as specified and directed.

M&L preparation of new plastered surfaces & applying 3 coats of white wash on wall surfaces complete all as specified and directed.

M&L for preparation of new plaster surface of wall and applying 2 coat of cement base paint over a coat of alkali resist priming paint complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed.

M&L Prepartion of old decorated surface of walls inclg cornices, pilasters etc & applying one coat of white wash on walls complete all as specified and directed.

All as per Srl Item No 114 here in before but two coats of white wash on walls

All as per Srl Item No 114 here in before but one coat of white wash on Ceiling

All as per Srl Item No 114 here in before but two coats of white wash on Ceiling

M&L Prepartion of old decorated surfaces (plastered/unplastered) of walls by brooming down & applying one coat of colour wash complete all as specified and directed.

All as per Srl Item No 118 here in before but two coats of colour wash.

M&L preparation of old distempered sufaces of walls by washing.,rubbing down and stopping of distempered surfaces, and applying one coat of oil bound distemper on walls complete all as specified and directed.

All as per Srl Item No 120 here in before but two coats of oil bound distemper on walls.

All as per Srl Item No 120 here in before but one coat of oil bound distemper on ceiling.

M&L peparation of old painted wooden surfaes of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L peparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old surfaces in walls soffits, facia roof and applying one coat of weather proof acrylic based paint (100% acrylic) over a coat of primer all as specified.

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down including applying a layer of chalk whiting (putty) for making the surface even & smooth and applying 2 coats of oil bound distemper over a coat of Alkali resistant primer complete all as specified and directed.

M&L for chequered cement concrete tiles 20cmx20cmx25 mm thick over 20 mm thick screed bed in CM 1:6, set , jointed and pointed with grey cement & pigments etc all as specified as in floor complete all as specified and directed.

M&L for PCC (1:1.5:3) type A-O, interlocking tiles gloosy finish coloured of approved design/pattern, 80mm thick laid over and including fine sand cushion not less than 25 mm thick to a line surface, slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and as per manufacturers instructions and directed.

Dismantling of ceiling boards any thickness including cover fillets etc complete all as directed.

S&F for Amstrong ceiling made out of 600x600x15 mm thick classic lite(RH-95) mineral fibre acoustics ceiling board/tiles deep panel suspender system made out of GI sheet main Tee and cross tees and angle including 2mm GI wire for suspending ,bolts, necessary washer,nut/clits/pin hook etc for securing frame work to ceiling to the snap grid complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, as in valley gutter, ridge of roof, wall and cladding etc complete all as specified and directed.

Dismantling structural steel work wrought iron or mild steel work including door, gates, of any description not otherwise provided for complete all as specified and directed.

S&F of Rolled sections of Fe-410-W (Gde-E-250) quality-B as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, chajjas, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge of roof covering/ cladding to wall, chajjas, valley gutter, fixed with self tapping screws as specified.

M&L demolition of concrte in ground floor and pavings n exc 15 cm thickness ( below or above ground level) complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) cement concrete as in roof etc. complete all as specified and directed.

M&L for Rendering 10mm thick in CM (1:4) on fair faces of brick/concrete surfaces, finished even including mixing integral waterproofing compound complete all as specified and directed. (WPC measured and paid separately)

M&L for water proofing treatment with five layered 4mm thick APP (Atatic poly propylele) modified bituminous membrane re-inforced with non woven polyster mat of weight 180 gms/sqm as centre core and without multiple layers of polythene finished on top and bottom with 7 micron thick flammable polythlene applied by thermo fusion using LPG torch on the bottom portion of the membrane after applying a coat of bituminous primer @ 0.25 kg / sqm over roof and finishing the treatment with one coat of bitumen ( An overlap of 100mm & 150mm shall be provided on sides ends respectively).

Dismentling 75/100mm dia CI pipe jointed in cement mortar and taking out of trenches as required complete all as specified and directed.

S&F 100 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F 75 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F CI Bends100 mm bore (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F CI Bends 75 mm bore (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

M&L Cast iron nahani trap with grating including jointing to waste pipe run lead 100 mm complete all as specified and directed.

M&L Cast iron nahani trap with grating including jointing to waste pipe run lead75 mm complete all as specified and directed.

M&L for Branch pieces, 100 mm bore single ( equal or unequal), ordinary or inverted (spigot or socket type) or with parallei branches complete all as specified and directed.

M&L for Branch pieces, 75 mm bore single ( equal or unequal), ordinary or inverted (spigot or socket type) or with parallei branches complete all as specified and directed.

S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm/100mm dia bore of pipe complete all as specified and directed.

S&F aluminium anodised various section as required for doors, window & partion etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant etc complete all as specified and directed.

S&F aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 102 or equivatent 6.3 mm thick complete all as specified and directed.

S&F 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified and directed.

Hacking out old broken glass ( any thickness/size) from wooden/metal frames and S&F 3mm thick sheet glass , ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3 mm thick sheet glass , ordinary quality and glazing with oil putty in square n exc 0.5 sq.m. in each pane complete all as specified and directed.

Dismantling of single layer Mangalore pattren or similar tiles in roofing complete all as specified and directed.

Dismantling battens for tiles of any size including tiling fillets exc 15 cm spaced complete all as specified and directed.

Dismantling timber scantlings framed work 40 sq cm and over in section as in any position complete all as specified and directed.

M & L second class hard wood timber framed and scantling wrougth in scantling complete all as specified and directed.

M&L roof tiles, Mangalore pattern, interlocking at side joints laid dry complete all as specified and directed.

Refixing old roof tiles, mangalore pattern, interlocking at side joints laid dry complete all as specified and directed.

M&L Ridge or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in lime morter 1:3 or cement morter 1:6 complete all as specified and directed.

M&L 2nd class hardwood clean sawn battens at 25 cm centres and sectional area exc 15 & nxec 25 sq cm etc complete all as specified and directed.

SB CONSTRUCTION

Sahi Sagar Enetrprises

jkconstruction

SAIRAM CONSTRUCTION