SPL REPAIR TO BLDG NO P 47 WITH CONNECTED SERVICES IN 162 MH AT DINJAN MIL STN UNDER GE DINJAN

Amount

Demolition of cement concrete s reinforced (reinforcement cut as required to facilitate demolition) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Use and waste Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter all as specified and directed.

Use and waste Formwork to soffits of suspended slabs curve such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc all as specified and directed.

M&L for RCC (Nominal Mix) type Bo 1:2:4 (12.5mm graded aggregate) for Chajjas, Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc all as specified and directed.

MS TMT bars 8 to 10 mm dia and over, cut to length, bent to shape required, including cranking, bending etc and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in reinfocemetn complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc all as specified and directed.

M & L PCC 25mm thick 1:2:4 type B0 (12.5mm graded aggregate) thick as sub base finishing cement concrete surface even & fair whthout using extra cement complete all as specified and directed.

M&L 15 mm thick, screed bed or bedding layer of cement mortar 1:6, for laying floor finishes all as specified and directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed.

M&L rendering 10mm thick in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in vertical surfaces for laying tiles all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 450x 300x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame)exe 1.50 but n. exc. 4 sqm in each complete all as specified & directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) n. exe 1.50 sqm in each complete all as specified & directed.

M & L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed.

M & L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately all as specified and directed.

M & L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly as per specification & drawing., Section -8, clause 8.24(a) all as specified and directed.

S&F powder coating Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified including powder coating of minimum 50 micron thickness all as specified and directed.

S&F Powder coating anodised aluminium window and ventilator shutters, side hung type without sash, aluminium sectiion weighihg 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber e packing, anodised handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified and directed.

S&F Powder coating anodised aluminium door shutters, aluminium sectiion weighihg 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified and directed.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all as specified and directed.

S&F 12mm Prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame workall as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sq.m. each pane all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sq.m. each pane all as specified and directed.

S & F stainless steel wire cloth, 036 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed.

S&F floor door stopper 150mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in doors all as specified and directed.

S&F Aluminium (extruded section body) door closer hydraulically regulated desiognatiion No 1 universal type, suitable for door shutters upto 700mm in width and of weight not more than 35 kg and fixed all as specified and directed.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed.

Dismantling water tanks and removing to store Exc 500 & n.exc 1000 Ltrs all as specified and directed.

S&F Rotational moulded polye?thylene water storage tanks 1000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed.

S&F 15mm bore ball brass valves high pressure, with polythene float & fly nuts complete, screwed for iron pipe or brass ferrulecomplete all as specified and directed.

S&F 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed.

Demolition of cement concrete (unreinforced) Concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

M&L of Cement concrete type C2 1:3:6 (40mm graded aggregate) as in surface channels and drains all as specified and directed.

M&L Extra for forming fair finishing to drains or channel of 30 cm inner girth in cement concrete with using extra cement including forms, moulds, mitred/stopped ends etc all as specified and directed.

Dismantling 100mm bore, PVC pipes, jointed in cement mortar and taking out of trenches if requiredall as specified and directed.

S&F 110mm PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 110 mm PVC (SWR) junction single, (Single T) equal or unequal all as specified and directed.

S&F 75 mm PVC (SWR) junction single, (Single T) equal or unequal all as specified and directed.

S&F PVC 75mm (SWR) vent cowl all as specified and directed.

S&F in repairs curtain rails, mild steel, aluminium alloy chromium plated with fixing brackets, stops, rollers etc all as specified and directed.

M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed.

S&F 100 mm size, butt hinges, extruded medium weight cold rolled mild steel etc complete all as specified and directed.

S&F 75 mm size, butt hinges, extruded medium weight cold rolled mild steel etc complete all as specified and directed.

S&F 150mm size, aluminium anodised handle, fabricated type all as specified and directed.

S&F 100mm size, aluminium anodised handle, fabricated type all as specified and directed.

M&L 150 mm long mild steel, barrel tower bolts of extruded section etc complete all as specified and directed.

M&L 100 mm long mild steel, barrel tower bolts of extruded section etc complete all as specified and directed.

S&F Mild steel sliding door bolts,250mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and directed.

Demolition of brick work built in cement morter as specified and as directed all as specified and directed.

M&L old size brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in built in CM 1:4 all as specified and directed.

M&L Old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specified and directed.

Taking down cement plaster on brick or stone or concrete surfaces of wall etc , icluding raking out joints , hacking for key, scrubbing down with water etc all as specified and directed.

M&L for rendering 10mm thick on fair face of brick works or concrete surfaces of walls with CM (1:4) anf finished even and smooth without using extra cement all as specified and directed.

M&L for rendering 5mm thick in ceilings of concrete surfaces with CM (1:3) anf finished even and smooth without using extra cement all as specified and directed.

M & L for rendering 15mm thick on other thanfair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound weight of cement as per manufacturer's instructions and finished the surface even and smooth without using extra cement complete all as specified and directed. ( Note : WPC shall be measured and paid separately)

Supply only water proofing compound for external plaster all as specified and directed.

M&L for preparation newly plaster surfaces of wall, chajja facia etc with putty 1-2mm thick and applying two coats of 100% premium Acrylic emulsion paint having VOC less than 50 gm/litre and UV resistant as per IS-15489=2004 alkali and fungal resistant exterior paint of required shed (company depot limited) with silicon additives 1/43 litres/10 Sqm over and including primer applied 0.90 litres/.10 sqm over new surfaces using Airless spray technology with maximum working pressure of 3300 PSI and capable of operating single spray gun with a maximum material hose length of 30 Mtr, the spray machine whould be of reputed manufacturer with pro guaeds technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and acessories complete all as specified and directed.

M&L for Complete removal of existing treatment and treating from walls and applying 1-2mm thick wall putty and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surface even and smooth complete all as specified and directed

M&L for preparing of new plastered surfaces of walls & applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth etc and applying two coats of oil bound distemper etc complete all as specified and directed.

M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash over a coat over a coat of white primer etc complete all as specified and directed.

M&L for complete removal of old plastered surfaces of ceiling and applying three coats of white wash etc complete all as specified and directed.

Dismantling wall and celling board (fibre, pulp, insulation etc) any thickness including cover fillets as directed.

S&F 605x605mm Anodised aluminium snap grid frame work for false ceiliong all as specified and directed.

S&F Hangers 6mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilinhg cleats made out of G.I. flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

M&L for 6mm thick high pressutre, oceanic pre-primed, self embossed, non-asbestos fibre cement decorative board , water, termite and fire resistant for insulatrion and acoustic piurpose fixed or laiod/inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including removal to store complete all as specified and directed.

Re-fixing 15mm bore old steel tubes,with all fittrings and fixed, to walls and ceilings or laying in floors all as specified and directed.

S&F steel tubes, galvanised 15 mm bore, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc including taking down old one complete as specified and directed

Taking up or down 20 mm bore steel tubing and connections, including removal to store complete all as specified and directed.

Re-fixing 20mm bore old steel tubes,with all fittrings and fixed, to walls and ceilings or laying in floors complete as specified and directed

S&F steel tubes, galvanised 20 mm bore, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete as specified and directed .

S&F in repairs Vitreous china wash basin, white flat back, size 550mm x 400mm with brackets, excluding pillars cock 15mm bore CP, PVC connection of 450mm long including PVC (HDPE) 32mm bore waste pipe, brass couplings 32mm CP etc complete all as specified and directed.

S&F 15mm bore Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete as specified and directed

S&F in repairs, stop valves, 15mm bore cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed bhoth ends for iron pipe or for unions as specified and directed complete as specified and directed

S&F in repairs 15mm bore PVC connection pipe 450mm longh with PTMT nuts at both ends complete as specified and directed

S&F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet. Ball valve, float bracket & flush pipe complete all as specified & directed.

S&F in repairs 15mm bore Bib Taps, Chromium plated cast copper alloy with crutch or butterfly handle, screwex for iron pipe or for brass ferrule and fixed complete as specified and directed

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete as specified and directed

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) with seat cover white with 'P' or 'S' trap, including and flushing pipe etc complete including making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing specifications as specified (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S&F in repairs Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern omplete all as specified and as directed.

S&F in repairs 32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm?45gms/40mm-60 gms) complete all as specified and directed.

S&F in repairs, Towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) all as specified and directed.

S&F for vitreous china bowl urinal flat back,size of 465x355x265mm white(minimum) including providing and fixing plugs bedding urinal against wall in cement motar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement;fixing cistern with brackets flush pipe grating and Union for discharge pipe.( Exclusive of fixing supply pipe grating and union for discharge pipe(excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed

Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness(below or above GL) complete all as specified and directed.

M&L for PCC 1:5:10 Type E2 (40mm graded stone agg.) as in foundation filling and mass concrete as in Sub Base concrete all as specified and directed.

M&L for rendering 15mm thick in fair faces of concrete surfaces with CM (1:4) anf finished even and smooth without using extra cement all as specified and directed.

S&F for APP based polymeric membrane minimum weighing 3Kg/sam and minimum 3mm thick reinforced with polyster non wove fabric (wt, not less than 150 gms/sqm) land on primed surfacfe by forced application complete all as specified and directed.

M&L for Bitumen blown any grade, applied hot, two cfoats, to concrete surfaces at the rate of 1.5 Kg per Sq. m. per coat all as specified and directed.

Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed.

Taking down carefully MCB DBs any type and size by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and keeping it in MES store for safe custody and refix it after repair all as specified and directed.

Material and labour for point wiring for the followings with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC concealed including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of 1.2mm thickness with plastic laminated white top sheet cover 3mm thick. (a) One light/fan point controlled by one,one way switch all as specified and directed. (Note:-(1) Rate for Cutting, chieseling and making good the existing surface for complete concealed wiring is deemed to be included in quoted rate) all as specified & directed by Engr-in-Charge as below :-

Description all as Ser item No. 98 here-in-before but One 3 Pin 5 Amps socket out let point on independent board all as specified and directed.

Description all as Ser item No. 98 here-in-before but One 3 Pin 5 Amps socket out let point on same board alongwith other suitable switchs all as specified and directed.

Description all as Ser item No. 98 here-in-before but using 4 sqmm PVC FRLSH insulated copper condutor wire for connecting 15A socket on independent board complete all as specified and directed.

Supply and fixing of switch piano flush type 240 Volts 5 Amps decorative type, SP, one way complete all as specified and directed.

Supply and fixing of switch socket combination 3/5 Pin, 2 in 1, 5 Amps decorative type, 240 volts flush type (non shuttered) complete all as specified and directed.

Supply & fixing of socket outlet 2 in 1, 3/5 pin 5 Amps, decorative type 240 Volts, flush type (non shuttered) complete all as specified and directed.

Supply and fixing of switch socket out let combination decorative type multipurpose 3/5 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as specified and directed.

Supply & Fixing of ceiling fan regulator electronic,decorative type Deluxe,rotary, step type, 120/280 volts all as specified and directed.

Supply and fixing angular/batten holder PVC/Polycarbonate suitable for batten fittings including one LED Lamp of 9W of Havells/Philips/Cromton Make, complete all as specified and directed.

Supply and fixing of ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified and directed.

Supply and fixing LED fitting 1x18 watts, 220volts AC decorative box type with driver,holder LED tube light conncting up to 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing of Linear pendent light Aesthetically designd 1.5m trunk light suitable for 1no luminaire duly powder coated housing made of AL extrusion and opal diffuser, with all accessories needed for installation all complete all as specified and as directed. Make: crompton, havells, phillips or equivalent.

Supply and fixing of surface mounting LED edgelit slim round downlighter made of PDC AL with huge efficient LEDs and glare free opal diffuser, IP20 including all the accessories needed for its installation all as specified and directed. Make" havells, crompton, phillips or equivalent. cat part- SM296C LED20S-6500 PSU WH or equivalent

Supply and fixing inverter type LED batten(1.2m) made of CRCA sheet housing with PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumen at a minimumsystem efficiency of 115 lumen per watt and total power consumption not more than 18/20 W iincluding driver. It has a rated system life time of 40000 burning hour at L70 and should have a colour temperature of 6500K, CR>80 , THD < 10 % and PF>0.95 complete all as specified and directed. Make: Phillips , Crompton , Havells or equivalent.

S&F LED building security light fitting 35W 230 volts AC outdoor tye with high pressure die cst aluminium hostng and heat resistant complete with driver, lamp baacket with impact and corrosin resistant including thermal management in multiple optics complete wth IP 65/66 protection completed all as specified and directed.

S&F Bldg light bracket fabricated out of GI Tubing light grade 32 mm bore Bend to the shape as directed and of length 1.5 mtr complete with mounting MS clamp of flat iron size 40X5mm of suitable length 02 pairs incl nut bolts etc of suitable size, including taking down old corroded one all as specified and directed.

Supply and fixing in repair of MCB Distribution board TPN 4 Way for mounting SPN/ SP/TPN/TP MCBs as Incoming / outgoing, factory made, confirming to IS, fabricated out of CRCA sheet , fitted with DIN channel, neutral link and suitable rated bus bar, DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed.

Supply and fixing in repair of MCB Distribution board SPN 8 Way for mounting SPN/ SP MCBs as Incoming / outgoing, factory made, confirming to IS, fabricated out of CRCA sheet , fitted with DIN channel, neutral link and suitable rated bus bar, DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed.

Supply & fixing in repair 415 Volts 10KA 'C' curve miniature circuit breaker(MCB) TPN 63 AMP in the DB complete with connection testing and commissioning all completed all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) DP of current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning all complete all as specified and directed.

Supply & fixing in repair of DP MCB of 32Amps 'C' Series 10 KA 240 volts complete all as specified and directed.

Supply & fixing in repair of SP MCB of 6-32Amps 'C' Series 10 KA, 240 volts complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised wire of dia 4 mm as earthing lead by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and eath works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material complete all as specified and directed.Note:No extra payment will be for the earthing GI wire of size 4 mm dia all complete all as specified aand as directed.

Taking down old unsv submain wiring and Material & labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC conduit of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 10 Sqmm as earth wire (green in colour) run through PVC Conduit and connected common earth dolly including taking out the old sub main wiring for connection to DBs/dolly shall be deemed to be included in this item and Two runs of 6 Sq mm as current carrying conductor and one run of 6 Sq mm as earth conductor PVC conduit shall be measured as one run for measurement, complete all as specified and directed.

Taking down old unsv Cable and Supply and laying and testing cable, XLPE insulated,screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables(heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core all as specified and directed.

Excavating in Trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth, Taking Out and Laying of Cables, etc. and getting out in Soft/ Loose Soil, complete all as specified and as directed.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 250mm in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated Materials (Soils) not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the Starting Point in Soil, complete all as specified and as directed.

M&L Sand Cushioning (dry) in Trenches for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 230mm Spread thick -ness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed.

S&F LT cable cover, laid breadth-wise along the axis of Cable laid in Trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.

Boring under without disturbing the top surface of the road for passing through GI protection pipe 50mm bore, not exceeding 10m in single length complete all as specified and as directed. Note: Necessary infrastructure required for boring shall be arranged by the contractor at his own cost.

M/S CHANDAN ENTERPRISE (BID ID -3365475)

M/S A K BROTHERS (BID ID -3365997)

M/S. UDDUG CONSTRUCTION (BID ID -3365506)