PROVISION OF AUTOMATED LIFT IN HOSTEL OF RTC LUCKNOW UNDER GE E/M LUCKNOW

Amount

Supply, installation, testing & commissioning of passengers lift, Capacity of 06 persons, 408 kg, speed 1.00 m/s lift with single speed motor 415 volts, 3 phase, AC 50 Hz supply conforming to IS-14665, suitable to serve G + 02 and 3 Opening floors with AC Variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, mechanical rescue, single phase failure sensing ARD, 2 hr fire rated door, automatic break testing, 169 cris cross beams, 2 lakh door duty cycle, fire man drive. Including U clamp 04 Nos on ceiling for suporting to the lift machinery will be provided by the contractor as per the manufacturere specification. 1. The contractor ensure that all materials/spares once the incorporated in the work, they should maintain warranty for one years.

A TECHNICAL SPECIFICATIONS a Stops & Openings 3Stops, 3 Openings b Floor designations G,1,2, c Well diamention: 1600mm wdth and 1600mm depth required d Control Simplex full Collective Control e Drive ACVVVF f Power supply 415 volts, 3 phase, 50Hz, AC g Hoist way dimensions 1600mm wide x 2100mm deep, centralised hoisting for lesser vibration and smooth pit ladder. h Car travel 7.2 m j Head Room height 4500mm k Pit depth 1600mm l Car dimensions 1000 mm wide x 1050mm deep x 2200mm high

m Door opening 700mm wide x 2000mm high n Car door 2 panel automatic center opening door with ACVF drive-in Stainless-steel HAIRLINE o Landing door (Group1) 2 panel automatic center opening door in Stainless steel HARLINE finish on 3 floors p Landing door (Group2) 2 panel automatic center opening door in Stainless steel HAIRLINE finish on 0 floors q Car suspended ceiling Stainless steel Hairline finish with Square LED for car lighting "r) Car flooring-20mm GRANITE s) Natural mirror in car - Natural mirror of half car height and full car width provided on rear wall of car t) Handrail - Round handrail in Stainless Steel finish provided on all three walls of car u) Landing operating panel - Individual landing operating panel for each elevator"

B FEATURES INCLUDED a Alarm button in car operating panel with battery back-up b Automatic operation for car fan and light. c Adjustable door open time d Anti-nuisance (empty car) e Anti-nuisance (car call cancellation at direction reversal) f Blower fan in car for ventilation g Braille on push buttons h Car call cancellation by double pressing floor button in car operation panel i Door open and door close buttons in car operating panel j Door closing retries k Door nudging

l Emergency light m Full load by-pass n Home landing o Infra-red screen for car door p Intercom q Jammed landing operating panel call button by-pass r Motor overheat protection, correction drive to next level. s Overload function with audio-visual indication in car operating panel t Phase failure and phase reversal protection u Automatic rescue device in case of power failure

v Attendant control w Car arrival chime on car top x cop lcd DISPLAY WITH 38 MM DIGIT DISPLAY in car operating panel y 7 SEGMENT DISPLAY scrolling display in landing operating panel on All Floors z Fireman control aa Fireman emergency return ab Provision of additional cores in travelling cable for CCTV camera signals/music system wiring ac Voice announcement unit in English language in car ad Machine No: NMX05 ae Traction meedium Steel Wire Ropes,Every 11 Hour Brake Testing

C "1. Bulk head light with 3 pin switch and socket rated 16 Amp to be provided at every 3 meter as per position in GAD for illumination (PVC Pipe / MS Pipe to be used for wiring) 2. 1 No bulk head light in PIT at 2 Feet above from pit flooring. 3. 1 No. bulk head light in head room at 2 Feet below from top slab. 4. 2way switch for bulk head light to be fixed inside the lift pit and at top floor. 5. Dedicated 2 no’s earth pit and copper/GI Earthing terminated to earth bar in head room showing 0-3volts.( 3x25 mm earth strips) 6. Three phase balanced power supply required 415volts 50 Hz. 7. 4 CORE 25 sq mm copper armoured cable terminated at top floor MCB Box. 8. Cable Gland and Lugs to be fixed in single phase and three phase cables. 9. Exhaust fan along with louver to be fixed at head room.( 12 inch) 10. DB BOX 8 WAY SPN to be fixed at top Floor. a) Three Phase 4Pole 25 Amp MCB required -1 No for 06 Pass lift b) 1Pole 16 Amp MCB -2Nos c) 1Pole 10 Amp MCB -2 Nos"

D. Making & All Ms works,Scafffolding,Dismentling of Wall at all three floors for Landing Entrance Fixing of Lift with Sill Frame and brackets at all level, Labour charge including gas cutting & All fabrication work,ACP Work for cladding of lift well with respect to every floor,Minor Civil Work of Pit foundation and Repairing,minor touch up and other activity which is required to be done for completion of lift in all respect to be done.

M/s Dhapola Elevator and Engineering (BID ID -3207920)

M/S SIDDHI VINAYAK ENTERPRISES (BID ID -3204673)