Decorative electric lights will be installed from Channamma Circle from Sai Circle to Eidgah Compound, from Oil Mill Plate to Karehona Shop in Ward No7 to Shivananda Sannakki House, from Ashtagi Cinema to Ghanti House in Ward No 09 and installed HYMAST LIGHT in near Channagireshwara Temple in Ward No21 and near Hanumana Temple in Kalpada Area in Ward No 23 at Mahalingapura TMC IN NAGAROTHANA PHASE 4 PROJECT

7 25 WORKS Installed HYMAST LIGHT in near Channagireshwara Temple in Ward No21 at Mahalingapura TMC IN NAGAROTHANA PHASE 4 PROJECT

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, Fitting and Placing un-coated TMT bar Reinforcement in sub-structure complete as per Drawing and Technical Specifications. Section1600 &2200 (PWD SR 2021-22 Vol-3, P.NO -99, Item No -13.1)

Fabricating, supplying and erection of ... ms long hot dip Galvanized Conical hot dipPole with BSEN10025 grade S355 JO steel plate forshaft,IS2062forbaseplatewithdooropeningarrangements, including sui...

Supply of LED Floodlight 150W luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded p...

Fixing halogen/metal halide floodlight fitting over existing pole /wall celling including clamps bolts and nuts and wiring using suitable capacity wires complete.

Supplying & fixing of Porcelain fuse channel with cut on existing wooden /panel using necessary nuts, bolts and wasgers etc., complete.C) 63Amps

Supplying & fixing and wiring earth electrode for grounding conduits I.C cutouts and other equipments on the meterboard using 40mm dia 2.9mm thick GI pipe 2.5mtr long buried in a pit.The pit should be...

Supplying & running GI/copper conductor for grounding connections, Using necessary fixing materials as required25x3 mm Copper strip

Supplying of 1.1Kv LT UG cable having aluminium conductor PVC insulated, sheated,galvanized steel strip (Except 2CX10Sqmm wire aroured) confiriming to IS -3975:1990(No of strip indicated in GTP N& ex...

Labour charges for laying of 1.1 KV class UG cable in existing trench Gipipe /stoneware pipe /on pole as required I) existing trench/duct.A) 6sqmm to 16 sqmm

Digging of trenche of 0.6m deep x 0.50 Mtr wide refilling the trench to the required ground level and consolidating etc…,complete

HDPE pipes 90MM dia

Supplying fixing L.T cast iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen /insulating compound complete with terminals, clamps,bolts,nuts,and washersetc...

Fabricating supplying and mounting MS box made out 14 SWG suitable for floor /wall mounting ,fully weather proof with provision for better heat dissipation ,provided with hinged front cover ,equipped ...

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.

Supplying&fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materials and 'C' Type curve, indicatorON/OFF, energycross-3 withShort circuitbreaking

Supplyandfixingof3polepowercontactorwithNO/NCcontacts on existing wood/panel board using necessarybolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.40 A

Supply and fixing of Hot dip galnavised MS Bracket with Nut Bolts (round arm for 6 light fitting)

SupplyinganddrawingFlexibleMulticoreCablemanufactured with electrolytic grade flexible copper with low conductor confirmingto IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working vol...

Auto Manual Switch

SCP WORKS Installation of decorative electric lights on both sides of the road in Chinchali Plot Ward No 5 at Nagarothana phase 4

EARTH WORK- 1.1 Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds o...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushedgraded coarse aggregates and fine aggregates as per relevant ISC...

2.3 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregate...

2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints...

1.6 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Supply and laying Double walled corrugated (DWC) HDPE pipe including all necessary conneting sockets/couplings tees/Bends/End-caps of same materials in existing trench as per IS 14930 part-II suitable...

Decorative Light poles: Fabricating, supplying and crectic of 11 Mtrs long hot dip Galvanized Conical pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door openin...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polyca...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 2000 mm Stand...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 2.5 sqmm

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph/ 1 Ph connections with Loop-In & Loop- Out terminals for 10 mm2 /25 mm...

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.

Spiral Earth Electrode

Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,)

Guy Wire & GI Wire as per IS-2141

8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 16 Sqmm...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 25 Sqmm...

Heavy Duty Copper Terminal Long Barrel 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm

Aluminium End Terminal (Lug).16 Sqmm

Brass Cable Gland. 25 mm

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.

Supplying and fixing Electronic Trivector Meter (ETV)suitable for operation LT operation and - CT operated meter in polycarbonate body in class0.5 accuracy as per IS 14697 and completely wired.

Supplying and fixing of Shunt trip suitable for MCCB.CBCT

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...

Rotary handle for MCCB

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying of on load change over switches 4poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 100 A

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 25 x 3 mm GI strip

GNL WORKS Decorative electric lights will be installed from Channamma Circle from Sai Circle to Eidga Compound, from Oil Mill Plate to Karehona Shop in Ward No7 to Shivananda Sannakki House, from Ashtagi Cinema to Ghantis House in Ward No 09 and installed HYMAST LIGHT in near Hanumana Temple in Kalpada Area in Ward No 23 at Mahalingapur TMC IN NAGAROTHANA PHASE 4 PROJECT

EARTH WORK- 1.1 Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds o...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushedgraded coarse aggregates and fine aggregates as per relevant ISC...

2.3 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregate...

2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints...

1.6 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Supply and laying Double walled corrugated (DWC) HDPE pipe including all necessary conneting sockets/couplings tees/Bends/End-caps of same materials in existing trench as per IS 14930 part-II suitable...

Decorative Light poles: Fabricating, supplying and crectic of 11 Mtrs long hot dip Galvanized Conical pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door openin...

Decorative Light poles: Fabricating, supplying and crectic of 9 Mtrs long hot dip Galvanized Conical pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polyca...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polyca...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 2000 mm Stand...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 2.5 sqmm

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph/ 1 Ph connections with Loop-In & Loop- Out terminals for 10 mm2 /25 mm...

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.

Spiral Earth Electrode

Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,)

Guy Wire & GI Wire as per IS-2141

8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 16 Sqmm...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 25 Sqmm...

Heavy Duty Copper Terminal Long Barrel 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm

Aluminium End Terminal (Lug).16 Sqmm

Brass Cable Gland. 25 mm

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.

Supplying and fixing Electronic Trivector Meter (ETV)suitable for operation LT operation and - CT operated meter in polycarbonate body in class0.5 accuracy as per IS 14697 and completely wired.

Supplying and fixing of Shunt trip suitable for MCCB.CBCT

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...

Rotary handle for MCCB

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying of on load change over switches 4poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 100 A

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 25 x 3 mm GI strip

Hymast Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cau...

Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, Fitting and Placing un-coated TMT bar Reinforcement in sub-structure complete as per Drawing and Technical Specifications. Section1600 &2200 (PWD SR 2021-22 Vol-3, P.NO -99, Item No -13.1)

Fabricating, supplying and erection of ... ms long hot dip Galvanized Conical hot dipPole with BSEN10025 grade S355 JO steel plate forshaft,IS2062forbaseplatewithdooropeningarrangements, including sui...

Supply of LED Floodlight 150W luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded p...

Fixing halogen/metal halide floodlight fitting over existing pole /wall celling including clamps bolts and nuts and wiring using suitable capacity wires complete.

Supplying & fixing of Porcelain fuse channel with cut on existing wooden /panel using necessary nuts, bolts and wasgers etc., complete.C) 63Amps

Supplying & fixing and wiring earth electrode for grounding conduits I.C cutouts and other equipments on the meterboard using 40mm dia 2.9mm thick GI pipe 2.5mtr long buried in a pit.The pit should be...

Supplying & running GI/copper conductor for grounding connections, Using necessary fixing materials as required25x3 mm Copper strip

Supplying of 1.1Kv LT UG cable having aluminium conductor PVC insulated, sheated,galvanized steel strip (Except 2CX10Sqmm wire aroured) confiriming to IS -3975:1990(No of strip indicated in GTP N& ex...

Labour charges for laying of 1.1 KV class UG cable in existing trench Gipipe /stoneware pipe /on pole as required I) existing trench/duct.A) 6sqmm to 16 sqmm

Digging of trenche of 0.6m deep x 0.50 Mtr wide refilling the trench to the required ground level and consolidating etc…,complete

HDPE pipes 90MM dia

Supplying fixing L.T cast iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen /insulating compound complete with terminals, clamps,bolts,nuts,and washersetc...

Fabricating supplying and mounting MS box made out 14 SWG suitable for floor /wall mounting ,fully weather proof with provision for better heat dissipation ,provided with hinged front cover ,equipped ...

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.

Supplying&fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materials and 'C' Type curve, indicatorON/OFF, energycross-3 withShort circuitbreaking

Supplyandfixingof3polepowercontactorwithNO/NCcontacts on existing wood/panel board using necessarybolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.40 A

Supply and fixing of Hot dip galnavised MS Bracket with Nut Bolts (round arm for 6 light fitting)

SupplyinganddrawingFlexibleMulticoreCablemanufactured with electrolytic grade flexible copper with low conductor confirmingto IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working vol...

Auto Manual Switch

TMC Mahalingpura Nagarothana Phase-4

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushedgraded coarse aggregates and fine aggregates as per relevant ISC...

Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...

2.3 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregate...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, Fitting and Placing un-coated TMT bar Reinforcement in sub-structure complete as per Drawing and Technical Specifications. Section1600 &2200 (PWD SR 2021-22 Vol-3, P.NO -99, Item No -13.1)

Fabricating, supplying and erection of ... ms long hot dip Galvanized Conical hot dipPole with BSEN10025 grade S355 JO steel plate forshaft,IS2062forbaseplatewithdooropeningarrangements, including sui...

1.6 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Supply of LED Floodlight 150W luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded p...

Supply and laying Double walled corrugated (DWC) HDPE pipe including all necessary conneting sockets/couplings tees/Bends/End-caps of same materials in existing trench as per IS 14930 part-II suitable...

Fixing halogen/metal halide floodlight fitting over existing pole /wall celling including clamps bolts and nuts and wiring using suitable capacity wires complete.

Decorative Light poles: Fabricating, supplying and crectic of 11 Mtrs long hot dip Galvanized Conical pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door openin...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polyca...

Supplying & fixing of Porcelain fuse channel with cut on existing wooden /panel using necessary nuts, bolts and wasgers etc., complete.C) 63Amps

Decorative Light poles: Fabricating, supplying and crectic of 9 Mtrs long hot dip Galvanized Conical pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polyca...

Supplying & fixing and wiring earth electrode for grounding conduits I.C cutouts and other equipments on the meterboard using 40mm dia 2.9mm thick GI pipe 2.5mtr long buried in a pit.The pit should be...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 2000 mm Stand...

Supplying & running GI/copper conductor for grounding connections, Using necessary fixing materials as required25x3 mm Copper strip

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polyca...

Supplying of 1.1Kv LT UG cable having aluminium conductor PVC insulated, sheated,galvanized steel strip (Except 2CX10Sqmm wire aroured) confiriming to IS -3975:1990(No of strip indicated in GTP N& ex...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 2.5 sqmm

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 2000 mm Stand...

Labour charges for laying of 1.1 KV class UG cable in existing trench Gipipe /stoneware pipe /on pole as required I) existing trench/duct.A) 6sqmm to 16 sqmm

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Digging of trenche of 0.6m deep x 0.50 Mtr wide refilling the trench to the required ground level and consolidating etc…,complete

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 2.5 sqmm

Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph/ 1 Ph connections with Loop-In & Loop- Out terminals for 10 mm2 /25 mm...

HDPE pipes 90MM dia

Supplying fixing L.T cast iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen /insulating compound complete with terminals, clamps,bolts,nuts,and washersetc...

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Fabricating supplying and mounting MS box made out 14 SWG suitable for floor /wall mounting ,fully weather proof with provision for better heat dissipation ,provided with hinged front cover ,equipped ...

Spiral Earth Electrode

Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph/ 1 Ph connections with Loop-In & Loop- Out terminals for 10 mm2 /25 mm...

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.

Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,)

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.

Spiral Earth Electrode

Guy Wire & GI Wire as per IS-2141

8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM

Supplying&fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materials and 'C' Type curve, indicatorON/OFF, energycross-3 withShort circuitbreaking

Supplyandfixingof3polepowercontactorwithNO/NCcontacts on existing wood/panel board using necessarybolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.40 A

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 16 Sqmm...

Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,)

Supply and fixing of Hot dip galnavised MS Bracket with Nut Bolts (round arm for 6 light fitting)

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 25 Sqmm...

Guy Wire & GI Wire as per IS-2141

8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 16 Sqmm...

Heavy Duty Copper Terminal Long Barrel 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm

SupplyinganddrawingFlexibleMulticoreCablemanufactured with electrolytic grade flexible copper with low conductor confirmingto IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working vol...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 25 Sqmm...

Auto Manual Switch

Aluminium End Terminal (Lug).16 Sqmm

Heavy Duty Copper Terminal Long Barrel 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm

Brass Cable Gland. 25 mm

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Aluminium End Terminal (Lug).16 Sqmm

Brass Cable Gland. 25 mm

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm

Supplying and fixing Electronic Trivector Meter (ETV)suitable for operation LT operation and - CT operated meter in polycarbonate body in class0.5 accuracy as per IS 14697 and completely wired.

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying and fixing of Shunt trip suitable for MCCB.CBCT

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.

Supplying and fixing Electronic Trivector Meter (ETV)suitable for operation LT operation and - CT operated meter in polycarbonate body in class0.5 accuracy as per IS 14697 and completely wired.

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C

Supplying and fixing of Shunt trip suitable for MCCB.CBCT

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...

Rotary handle for MCCB

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying of on load change over switches 4poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 100 A

Rotary handle for MCCB

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

Supplying of on load change over switches 4poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 100 A

Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, e...

GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 25 x 3 mm GI strip

Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 25 x 3 mm GI strip

Hymast Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cau...

Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, Fitting and Placing un-coated TMT bar Reinforcement in sub-structure complete as per Drawing and Technical Specifications. Section1600 &2200 (PWD SR 2021-22 Vol-3, P.NO -99, Item No -13.1)

Fabricating, supplying and erection of ... ms long hot dip Galvanized Conical hot dipPole with BSEN10025 grade S355 JO steel plate forshaft,IS2062forbaseplatewithdooropeningarrangements, including sui...

Supply of LED Floodlight 150W luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded p...

Fixing halogen/metal halide floodlight fitting over existing pole /wall celling including clamps bolts and nuts and wiring using suitable capacity wires complete.

Supplying & fixing of Porcelain fuse channel with cut on existing wooden /panel using necessary nuts, bolts and wasgers etc., complete.C) 63Amps

Supplying & fixing and wiring earth electrode for grounding conduits I.C cutouts and other equipments on the meterboard using 40mm dia 2.9mm thick GI pipe 2.5mtr long buried in a pit.The pit should be...

Supplying & running GI/copper conductor for grounding connections, Using necessary fixing materials as required25x3 mm Copper strip

Supplying of 1.1Kv LT UG cable having aluminium conductor PVC insulated, sheated,galvanized steel strip (Except 2CX10Sqmm wire aroured) confiriming to IS -3975:1990(No of strip indicated in GTP N& ex...

Labour charges for laying of 1.1 KV class UG cable in existing trench Gipipe /stoneware pipe /on pole as required I) existing trench/duct.A) 6sqmm to 16 sqmm

Digging of trenche of 0.6m deep x 0.50 Mtr wide refilling the trench to the required ground level and consolidating etc…,complete

HDPE pipes 90MM dia

Supplying fixing L.T cast iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen /insulating compound complete with terminals, clamps,bolts,nuts,and washersetc...

Fabricating supplying and mounting MS box made out 14 SWG suitable for floor /wall mounting ,fully weather proof with provision for better heat dissipation ,provided with hinged front cover ,equipped ...

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.

Supplying&fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materials and 'C' Type curve, indicatorON/OFF, energycross-3 withShort circuitbreaking

Supplyandfixingof3polepowercontactorwithNO/NCcontacts on existing wood/panel board using necessarybolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.40 A

Supply and fixing of Hot dip galnavised MS Bracket with Nut Bolts (round arm for 6 light fitting)

SupplyinganddrawingFlexibleMulticoreCablemanufactured with electrolytic grade flexible copper with low conductor confirmingto IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working vol...

Auto Manual Switch