REPAIR REPLACEMENT OF FLOORING PLASTERING TILING JOINERY CUPBOARDS PLINTH PROTECTION AND CERTAIN BR WORKS IN OUTSIDE POCKET AREA UNDER GEAF ADM AREA GWALIOR

Amount

Demolition of PCC in ground floor & pavings (including floor tile ) n.exc 15 cm thickness below or above GL, including removing excavated material n exc 2.5 KM distance and depositing where as directed, complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding & removing serviceable material to store and rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick PCC 1:2: 4 type B0 (12.5 mm graded stone aggregate ) as in floor complete all as specified and directed.

M&L for non skid coloured ceramic floor tiles 7- 8 mm thick (square/ rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM (1:6 )complete all as specified and directed.

M&L for glazed ceramic tiles 450x300 x 6-7mm thick coloured on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including rendering 10 mm thick in CM 1:3 on wall complete all as specified and directed.

M&L, vitrified ceramic coloued tiles 10 mm thick, area of each tiles n. exc 0.36 sqm in floors, set and pointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick scarred bed in cement mortar 1 :6 complete all as specified and directed.

All as per sl item No. 6 but, on vertical surfaces over and including 10 mm thick rendering in CM 1:3 complete all as specified and directed.

M&L Granite of 18mm to 20mm thick (of any type) work (table rubbed/moulding and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and includung 20mm screed bed in CM 1:4 complete all as specified and directed.

Taking down and re-fixing of old aluminum door shutters in same opening after necessary required repairs and fittings including glass rubber beading and glazing clips (Glass pan and wire gauge will be measured and paid separately) area exc 2.00 sqm but n. exc 4.00 sqm each complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest and 'S' or 'P' traps(cast iron 100mm bore) (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc complete all as specified in SSR and complete all as specified and directed.

S&F in repairs vitreous China WC pan pedestal pattern white (excluding flushing cistern and flush pipe) but incl & connecting to trap set & concrete for making good to floor complete all as specified and directed.

S&F seat cover of Vitreous china, pedestal pattern water closet including mild steel CP hinges complete all as specified.

S&F in repairs seat cover of Vitreous china, pedestal pattern water closet including mild steel CP hinges complete all as specified and directed.

Supply and fix in repairs of PVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and incl ball valve float & handle, waste pipe & fixing accessories to wall complete all as specified and directed.

S & F in repair Vitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and 15mm bore CP, brass pillar Tap fancy type and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.

S & F in repair Vitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and 15mm bore CP, brass mixer for mixing hot & cold water screwed down for iron pipe fancy type and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe( overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm), complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc incl racking out joints hacking for key & scrubbing down with water etc. complete all as specified and directed.

M&L for brick work with sub class 'B' bricks old size, straight or curved on plan exc 6M mean radius built in CM 1:6 including demolition of brick work built in cement motor of any description complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick wall finished fair & smooth in CM 1:6 complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick wall with mixing WPC as per manufacture direction by wt of cement finished fair & even in CM 1:4 complete all as specified and directed. NOTE:- WPC shall be measured and separatly under respective item.

M & L for rendering 5 mm thick in CM 1:4 on concrete surfaces as on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M & L preparation of newly plastered surfaces of walls and applying one coat of primer two coats of oil bound distemper, complete all as specified and directed.

M & L preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M & L preparation of newly plastered surfaces of walls and applying one coat of primer two coats of cement base paint, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

~Ditto~ all as per item No 26 above but 20mm bore.

M&L for re-fixing of old steel GI tubing, 15mm bore and connections in new or old position (walls, ceiling, floors etc) with and including all new fittings complete all as specified and as directed.

~Ditto~ all as per item No 28 above but 20mm bore.

S&F GI tubing 15mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling etc complete all as specified and as directed.

~Ditto~All as per item No 30 above but 20mm bore.

M&L, for cleaning of overhead tanks of any description and in any position, removing all scales and dirt by detergent /detergent powder and finally disinfected with bleach wash etc. from tanks and mouths of circulating pipes etc and writing the date of cleaning and due date for cleaning, capacity of tanks exc. 250 liters but n. exc 500 liters each complete all as specified and directed.

All as per sl item No. 32 above but capacity of tanks exc 500 liters and n.exc 1000 liters complete all as specified and directed.

S&F in repair rotational mounded polythene water storage tank of capacity 500 liters (Cylindrical /vertical with close top) triple layer construction fixed in position complete all as specified and directed.

S&F in repair rotational mounded polythene water storage tank of capacity 1000 liters (Cylindrical /vertical with close top) triple layer construction fixed in position complete all as specified and directed.

S&F ball / float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20mm bore pipe minimum weight 210 gms complete all as specified and as directed.

S&F in repair ball / float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20mm bore pipe minimum weight 210 gms complete all as specified and as directed.

Repair leakage of 15 mm bore CP bib tap/ Pillar tap/ stop cock by replacing of necessary brass spindles as required complete all as specified and directed.

S&F in repair Brass chromium plated health faucets with flexible pipe length not less than 1.00 (minium) fixed for EWC/IWC suitable for 15mm bore pipe complete as directed

S&F in repairs PTMT waste coupling 32x100mm sink, complete all as specified and directed.

S & F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S&F in repair 15 mm dia stop valve cast copper alloy fency type with long shank and cup (concealed type) with crutch or butterfly handle screwed downboth ends for high pressure as per ISI complete all as specified and as directed. .

S & F in repair Bib taps, 15 mm dia, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

S & F in repair, fancy type pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in repair brass cromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed with rawl plugs. all as specified.

S&F in repairs PVC connections 15mm size of PTMT of 450mm long. complete all as specified and directed.

Taking down and re-fixing of old aluminum window in same opening with necessary required repairs and fittings including glass rubber beading and glazing clips (Glass pan and wire gauge will be measured and paid separately are n. exc 2.00 sqm each complete all as specified and as directed.

S&F Factory made single extruded WPC(Wood Polymer Composite) solid door/window/Ceosetory window & other Frame/Chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (suspendion Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrawal strength of 2200 N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of frame of Class 'A' category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge (MS hold fast/lugs or SS dash fasteners shall be paid for separately) complete all as specified and directed

S&F Factory made Solid PVC moulded Door shutter 28 to 30 mm thick (stiles), with particle board core with 2,4 or 6 raised panel design with 2mm thick moulded Prelam PVC sheet on front face and 2mm plain colour PVC sheet on back face , supplying & fixing in frame at site complete all as specified and as directed.

S&F in repair 19mm thick pre-laminated particle board interior grade, pre-laminated one side with decorative choice laminations and other side balancing white lamination fixed as cub board shutter / kitchen cabinet shutter complete including fixing of necessaary knobs, beading at exposed edges and matching by applying polish as directed complete all as specified and as directed.

S&F in repair 18mm thick solid UPVC ply of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screwes, solvent cement/ adhesive to make kitchen cabinate and cup board shutters complete all as specified and directed. Make :- Rajshree/Plastro green

S & F in repair18mm thick UPVC board of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom, shelves inside the cabinet and shutter or drawer including demolition of existing board any type or specification complete all as specified and directed. Make: Rajshri celuka or equivalent as approved by GE.

~ditto~ all as per srl item No. 52 above but 6mm thick both side white complete all as specified and directed.

S&F in repairs 3 mm thick sheet glass ordinary quality type & glazing with oil putty in squares not exc 0.5 Sqm in each pane with wooden beads incl hacking out old broken glass pane of any thickness and size complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window, completed all as specified and directed.

S & F continuous (Piono) hinges ,mild steel, bright finished or electrogalvanised, width of flap 30 mm (when open), complete all as specified and directed.

S&F 125 mm size alum, Hasp and staple, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S & F in repair 100mm M.S butt hinges with MS frame work by spot welding incl necessary arrangement and handling of welding machine upto third floor of Bldg complete all as directed and specified.

S & F in repair 200 mm MS door spring with MS frame work by spot welding incl necessary arrangement and handling of welding machine upto third floor of Bldg complete all as directed and specified.

S&F in repair fancy type decorated PVC sheathed GI curtain hanging rods 20 mm dia including brackets, including fixing arrangement and making up repair work and all fitting complete all as specified and directed.

Supply and fixing of rubber beading 40mm strip in bottom of door complete all as specified and directed.

S&F in reapir Mild steel Mortice lock double handle, vertical type, 06 levers for door complete all as spd and directed.

supply and fix sheet glass 4.8 mm thick ordinary quality in square exc 0.05 complete all as specified and directed.

S & F auto closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinete shuttercomplete all as specified and directed.

S&F stainless steel handles of 100mm size for kitchen cabinate shutter complete all as specified.

S&F in repairs of fancy type brass chromium plated Wall mixer with Telephonic arrangement & with pipe bend 3-in-1 screwed down 15mm bore complete all as specified and directed.

S&F in repairs of fancy type Wall mixer with pipe bend chromium plated screwed down 15mm bore complete all as specified and directed.

S&F in repairs of fancy type sink mixer brass chromium plated screwed down 15mm bore complete all as specified and directed.

S&F in repairs of fancy type overhead shower with arm swivel joint chromium plated screwed down 15mm bore complete all as specified and directed.

S&F in repairs center hole basin mixer brass chromium plated screwed down high pressure with or without lettered hot or cold with long srewed shanks & fly nuts for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair of vitreous china wash down water closet pan wall hung snow white with extened P trap including vitreous china flush cistern with twin flush and seat cover connection to drain flush pipe and anti syphonage pipe complete all as specified.

S&F in repair of internal fittings Kit complete for vitreous china flush cistern with twin flush of same as per site complete all as specified and directed.

S&F in repair rubber washers good quality for low level flushing cistern complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each with iron mongry complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exe 4 Sqm each with iron mongry complete all as specified and directed.

Taking down shutters exc 1 Sqm and n. exc 2 sqm each complete all as specified and directed.

Taking down shutters of any description area n.exc 1.00 sqm each complete all as specified and directed.

S&F 2nd class hard wood as plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints of llnd class hard wood complete all as specified and directed.

S&F factory made plain framed paneled shutter 35 mm thick IInd class HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail and style kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F factory made 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter , divided into squares with plain chamfered rounded, mitered and rebated sash bars complete all as spd.

~Ditto~ all as per srl item No 80 above but as in window shutters complete all as specified and directed.

S&F side hung shutter 1.25 mm thick pressed frame steel window with profile 100X40 mm sheet welded with double shutter double leaf of rolled Z steel scetion as per IS 1038 including MS suitable peg stay ,box type hinge 02 in each shutter, MS tower bolt with plate100 mm 02 in each shutter,MS handle 01 in each shutter welded to frame and 12 mm square guard bars welded to frame 150mm C/C both way over MS plate 30x5mm all around the frame complete all as specified and directed

S&F top hung shutter 1.25 mm thick pressed frame steel ventilator with profile 100X40 mm sheet welded with double shutter of rolled Z steel scetion as per IS 1038 including MS suitable peg stay ,box type hinge 02 in each shutter, MS tower bolt with plate100 mm 02 in each shutter,MS handle 01 in each shutter welded to frame and 12 mm square guard bars welded to frame 150mm C/C both way over MS plate 30x5mm all around the frame complete all as specified and directed

Refixing of shutters including taking down of any description exceeding 1 sqm but not exceeding 2 sqm each in same or other opening(s) after resecuring or easing & adjusting, complete all as specified and directed.

S&F 100 mm but hinges extruded aluminium alloy with galvanised mild steel hingepin, anodised and fixed, complete all as specified and directed..

S & F butt hinges medium weight cold rolled, mild steel and fixed 100 mm size complete all as specified and directed.

S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long complete all as specified and directed.

S&F aluminum handles cast type anodized 150 mm size complete all as specified and directed.

S & F 140 mm door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed complete all as specified and directed.

Supply and fixing of steel door spring of size 200mm in wooden/steel frame by welding or screwing as which ever is appropriate for fixing in frame complete all as specified and directed.

S&F Aluminium anodised , sliding door bolt with hasp , staples (bolt type) and fixing clipsof sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed...

Supply and fix galvanized mild steel wire cloth 0.56 mm nominal dia of wire and avg width of a-pertare 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed...

S & F 3mm thick sheet glass ordinary quality and glazing with in square n exc 0.5 sqm in each pane complete all as specified and directed.

M & L for providing cement concrete type C1 1:3:6 (20mm graded stone aggregate as in filling in hole fast blocks complete all as specified and direcetd.

S&F mild steel work as in small ariticles as bend, strap, hold fast and smiliar articles complete all as specified and directed.

M&L for 3mm thick figured or pin head glass ordinary quality and glazing with oil putty/beadings in square n exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size quantity or description) from wooden frame/Steel frame complete all as directed.

M&L for two coat of synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not other wise described over 10 cm width or girth complete all as specified and directed.

M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

S&F kitchen plate rack of stainless steel of size 720 x 600 x 230mm made out of 1mm thick stainless steel sheet all as specified and directed

S&F cast iron nahani traps with CP grating incl jointing to waste pipe in run lead joint for 75mm dia out let, complete all as specified and as directed.

S&F cast iron nahani traps with CP grating incl jointing to waste pipe in run lead joint for 100mm dia out let, complete all as specified and as directed.

S&F in repairs cast iron, soil waste/vent pipes(sand case) in any legnth with or without ears, with cement joints, fixed to wall bore of pipes 75mm dia complete all as specified and as directed.

~Ditto~ All as per item No. 103 above, but 100mm bore (spun pipes)soil waste/vent pipe complete all as specified and as directed.

S&F in repairs CI bend 100mm dia with door acees branch piece, 100mm dia, double, (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches Tee Junction with oval access hooks, complete all as specified and as directed.

S&F in repairs CI bend 75mm dia door access branch piece, 75mm dia, double, (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and as directed.

S&F in repairs two way bib cock, brass CP mixture for mixing hot & cold water complete all as specified and as directed. Make Godrej or equivalent as approved

S&F in repairs stainless steel drawer telescopic channel of size 500mm long of load bearing capacity 35 Kg complete all as specified and directed. Make Godrej or equivalent as approved

S&F in repairs stainless steel drawer telescopic channel of size 550mm long of load bearing capacity 35 Kg complete all as specified and directed. Make Godrej or equivalent as approved

S&F in repairs stainless steel drawer telescopic channel of size 600mm long of load bearing capacity 35 Kg complete all as specified and directed. Make Godrej or equivalent as approved

S&F cast brass cabinet cather of size 20mmx50mm and suitable for shutter complete all as specified and directed.

S&F front glass Shelf 8mm thick (chrome finish) of size 300mmx150mm fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed

S&F corner galss shelf 8mm thick (pack of three) of (chrome finish) fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed

S&F high quality plastic bathroom cabinet of size 550 x 342 x 125mm consisting front looking mirror and four to five inner compartments fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed

JAY PRAKASH SHARMA