To Provide Functional Household Tap connection to Rural Households in 2 Village Panchayats in sankarapuram Panchayat Union in Kallakurichi District for 2020-21 Package TNKKI/JJM 20-21/033

Amount

Providing 350 FHTC ,Water Distibution Pipeline 2150m and 30000 ltrs OHT 1 no with Pumping main Line 1200m, and Pump room to Ramarajapuram village in Ramarajapuram Panchayat in Sankarapuram block in Villupuram District

SUPPLY DELIVERY AND ERECTION OF SUBMERSIBLE PUMPSETS FOR INDIVIDUAL POWER PUMP SCHEME

Supply and delivery of vertical wet type submersible pumpset (5 HP) capable of discharging any of the following pumpage in lpm against noted head in m suitable for erection into the bore well/Inf. well / open well with stainless steel shaft, bronze impeller and starter.

Supply, delivery and erection of Submersible Pumpset of 125 LPMX 200 Head as per SOR TWAD - Page 88

Supply and delivery of 3 phase Panel Board D.O.L with two level guard and auto start confirming to IS specification for 1 HP pumpset. TWAD SOR Page 101

Supply, delivery of 1.1 KV Grade,PVC insulated and sheathed 3 core flat copper submersible cable with ISI marking conforming of IS 694/1990 of reputed make for submersible motor erected in borewell.

Sq.mm Copper cable page 109 II slno 2

40mm GI Pipe (3m) length Medium SOR TWAD page 25

40mm GI Coupling Heavy page 29

40mm GI Bend Heavy page 29

50mm GI Flangeset Heavy page 29

40mm MS Clampset Heavy page 29

50mm GM Non Return Valve page 30

50 x 40mm GI reducer heavy page 26

63mX50mm PVC T.Coupler page 10

40mm Ball Valve/ GM Gate Valve page 30

Lighting the pumpromm including internal wiring with switch circute fuses etc. with the following light fittings with ISI marking.

40W box type tube light - 1 No.

100W bulb with angle holder

100W bulk head fittings

5 AMPS 3 pin socket with switch

5 Amps switches for light(Flush type)

Providing lighting wiring using MS conduit pipes and specials with 2 runs 1.5 sqmm PVC copper wire and 1 run 12 swg GI wire for earthing for light, fans and 5A plug points etc.,

Obtaining power supply including cost of following materials and by engaging B licence holder.EB fee for application form and deposit amount will be borne by the Board

(i) Aerial fuse board of size 15 x 10 x 6cm with 32 A aerial fuse carrier(3 Nos.)

(iii)Wall mounting type MS cubical EB meter box with fuse carrier (3 Nos) of 32 A capacity at EB supply point.This box is also to accommodate TNEB energy meter with proper ventilation as approved by TNEB.

(ii) Supply and laying of 7/20 size PVC insulator copper conductor cable from Aerial fuse to EB supply point etc., complete as per I.E Rules.

25mm dia GI pipe for service point

25mm dia GI Elbow

No.8 GI wire for earth(Twin earthing)

Stay wire 7/20

20mm GI pipe for twin earthing and cable encasing

4way nutral link

TW banel board (41 x 31 x 6cm)

Labour charges for erection of submersible pump set including fixing and jointing the submersible cable with clamps to the required depth, valves and errection panel board control room twin earthing as per I.E Rules including cost of civil works

Upto 5 HP

Construction of Bore pit arrangements complete ect.

Provision for FHTC 's( 8 Meter Length Per FHTC) & Governnment Building

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

BT ROAD / WBM ROAD CUTTING CHARGES

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

PROVIDING PUMPING MAIN LINE

Earth work excavation in all types of strata for laying of pipes with the standard trench width as per Bd .Circular No. 28/ AE10/ P&D/ 2001/ dt. 01.10.2001 and JCE (P&D)/ Lr.No. LM/ AE10/ P & D/ 2001/ dt.22.11.2001

a. 90 mm OD PVC Pipe 6 KSC

Conveying the PVC Pipes and specials to trench lowering into the trenches, laying to proper grade and alignment, Jointing with PVC coupler and specials fixing with Solvent cement paste and testing to the required pressure as per IS including conveyance etc

Refilling with excavated soil complying with standard specification in layers of 15 cm thick well rammed and consolidated after pipes and specials are laid and tested.

Supply of PVC specials as per BIS 10124/1988 Part 1 to 13 &BIS 7834/1975 with ISI Marks to site of works

a.90mm PVC Bend

b 90mm PVC Threaded coupler

a.80mm GI pipe

a.80mm GI Elbow

b.80mm GI coupling

Laying and jointing of GI Pipes with GI specials and PVC specials etc 80mm dia Pipe

BT ROAD / WBM ROAD CUTTING CHARGES

Providing 20mm SAV along the pumping main alingment 0.3 X 0.45

OHT - SERVICE RESERVOIR - 30000 lit

First depth of 2m From 0 to 2 m below GL

Second depth of 1m

Sand filling for foundation with clear river sand including cost of sand, watering ,ramming and consolidation etc complete as directed by TWAD Board officers

Plain Cement Concrete 1:4:8 (one cement, four sand and eight hard granite broken stone of 40mm size ISS gauge) for foundation and footing including mixing, placing, ramming ,finishing curing etc. complete in accordance with standard specification and as directed by the TWAD Board Officers.

Reinforced Cement Concrete Mix M30 grade using 10mm & 20mm Hard blue granite Broken stone (machine crushed) excluding the cost of RTS rods for reinforcement and centering, strutting, shuttering but including cost of all materials mixing, laying, Vibrating the concrete with mechanical vibrators, ramming, consolidating, finishing and curing etc., Complete and as directed by the TWAD Board Officers.

Below1.5m from GL

Below 0.00 TO 1.5m from GL

For items 0m to 4.5m above GL &1.00 m Above G.L

For items 4.50m to 7.32m above GL

For items 7.32m to 10.98m above GL

For items 10.98m to 14.64m above GL

For items above 14.64m & up to 18.30m from GL

Supply and erection of steel centering, shuttering for soffits and sides including necessary supports and strutting for all RCC works using MS sheets of suitable size of BG10 stiffened with MS angle of size 25 X 25 X 3 mm for boarding laid over I type MS Truss of size 25 X 25 X 3mm about 90cm c/c and supported by 40mm GI pipes (Medium) spaced at 75cm c/c etc complete and as directed by the TWAD Board Officers.

PLANE SURFACES

Below GL

ABOVE G.L. to 3.30m

CURVED SURFACE

Square column

3.31m to 4.30m ht

Painting two coats with approved cement paint over one priming coat of white cement over cement plastered wall surface and ceiling including cleaning preparing the surface and curing etc., complete (using cement paint of colour as approved by the Departmental officer) and as directed by the TWAD Board officers.

Supplying, cutting, bending, tying, fabricating and placing in position of steel rods for all RCC works including cost of steel and binding wire etc.( The steel should conform to the relevant ISspecification and supplied with test certificate Fe. 415 grade as per IS specification No.1786/1985 and as amended from time to time) delivery at site of work including loading, freight, unloading, stacking, transit insurance charges, taxes etc. complete.and as directed by the TWAD Board officers.

Supply delivery and fixing of staircase with M30 grade concrete for landings, MS ladder of 0.45m wide using 50x50x5mm MS angles for sides and steps at 0.30m c/c, with GI pipe handrails using 32mm GI pipes for railings and verical support at 0.45m C/c, MS flats (Size 40mm x 5mm ) for horizontal ties at 0.3m c/c and at bottom with Anchor fastener bolts of size 12mm x 75mm including cost of materials labour for fabrication of handrails fixing, painting etc., complete.

Providing and fixing of RCC inner access ladder in RCC 1:11/2 :3 (one cement,one and half sand and three aggregate) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centring,shuttering charges, mixing concrete,curing etc. to required height and clear width of 45 cm consisting of 2 nos. of vertical post of 10 cm x 15 cm and step slab of 25mm x 25mm etc.complete and as directed by TWAD Board Officers.

Providing 110mm PVC vent cowl arrangements mosquito proof nylon net and as directed by TWAD Board officers

Supply and fixing of cut stone of size 0.30m x 0.30m x 0.15m in CM 1;3(one cement and three sand) below inlet pipe for Service Reservoir as directed by TWAD Board Officers.

Providing manhole cover of size 0.60 x 0.60M in RCC 1:1.5:3 with suitable reinforcement and 50x50x6mm MS angle fixed along edges and as directed by TWAD Board officers

Painting TWAD Board emblem on the SR with enamel paint as per Board's specification and as directed by TWAD Board officers

Pipe connection arrangements for inlet,outlet,scour and overflow etc. including cost of pipes,specials,valve,labour charges for lifting, aligning, cutting, threading ,fixing and painting of GI pipes with two coats of approved quality enamal paint etc. complete as detailed below.

65mm GI pipes for over flow & rain water harvesting pipe

65mm GI pipes for scour pipe

50MM GI Pipe for scour pipe

65mm GI pipe for delivery pipe

90mm PVC Threaded coupler

63mm PVC Threaded coupler

65mm dia GI Tee

65mm dia GI bend 90

65mm dia GI bend (SHORT)

65mm GI coupler

65mm GI union

65mm GI Elbow

50mm GI union

50mm GI Elbow

65mm dia GI Tee

65x50mm GI reducer

75mmx63mm PVC reducer

65mm GM gate valve

50mm GM gate valve

63 mm PVC 4Ksc Pipe

Refilling the foundation with excavated earth including consolidation as directed by the TWAD Board officers

Labour charges for GI pipe connection to the OHT, for inlet, outlet, overflow and scour arrangements including cutting and threading, earth work excavation & refilling.

Providing Hand rails over the Roof slab by using 32 mm GI Pipe with 40mm x 6mm MS Flat and fixied with 12mm dia Fastner Bolt 75mm long and as directed by TWAD Bd officers

Providing Hand rails over the Standing Platform by using 32 mm GI Pipe with 40mm x 6mm MS Flat and fixied with 12mm dia Fastner Bolt 75mm long and as directed by TWAD Bd officers

Water Meter for Pumping Main Lines

Provision for water meter 50 mm , page 81 of SOR TWAD

Dirt box

Erection Charges

Provision for GI & PVC Specials

DISTRIBUTION MAIN - Fixing of Water meter

Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause

Water meter Dirt BOX

Water meter erection charges

Provision for pit for Gate Value 90X75cm

Provision for GI & PVC Specials

Name Board & Photographs

PROVIDING DISTRIBUTION LINES

Earth work excavation in all types of strata for laying of pipes with the standard trench width as per Bd .Circular No. 28/ AE10/ P&D/ 2001/ dt. 01.10.2001 and JCE (P&D)/ Lr.No. LM/ AE10/ P & D/ 2001/ dt.22.11.2001

a. 63 mm OD PVC Pipe 4 KSC

Conveying the PVC Pipes and specials to trench lowering into the trenches, laying to proper grade and alignment, Jointing with PVC coupler and specials fixing with Solvent cement paste and testing to the required pressure as per IS including conveyance etc

Refilling with excavated soil complying with standard specification in layers of 15 cm thick well rammed and consolidated after pipes and specials are laid and tested.

Supply of PVC specials as per BIS 10124/1988 Part 1 to 13 &BIS 7834/1975 with ISI Marks to site of works

50mm PVC Bend page 12 ,sl.no-3

63mm X 50mm PVC Threaded coupler page 10 SOR

63mm x50 mm PVC Tee IS 7834/1987 page 10

63mm End cap page 12 sl.no 11

a.50mm GI pipe-page 25 sl.no 6

a.50mm GI Elbow page 25 sl.no 1

b 80mm GI coupling page 25, sl.no 3

Laying and jointing of GI Pipes with GI specials and PVC specials etc 50MM GI PIPE

C.C.ROADS

Provision for gate value 80 mm

Provision for BORE WELL

Geophysical Investigation Charges etc.,Complete

Supply and Delivery of 150mm dia PVC casing pipes including all charges etc., Complete.

Drilling of 150mm dia bore well in hard rock area using DTH rig including cost of transportation charges for Rigs and other supporting vehicle etc., complete.

Providing 456 FHTC ,Water Distibution Pipeline 2320m and 30000 ltrs OHT 1 no with Pumping main Line 900m, and Pump room to valayampattu village in valayampattu Panchayat in Sankarapuram block in Villupuram District

PUMP ROOM

Earth work excavation & depositing on bank with an initial lead of 10 metre & initial lift of 2 metre in Hard shift clay, stiff block cotton, hard red earth shales, murrum, gravel, stoney earth, and earth mixed with small size boulders and hard gravelly soil (SS 20B) for foundation including shoring, strutting, baling out water providing danger light wherever necessary depositing the surplus earth on bank and other incedential charges etc., complete and as directed by TWAD board Officers

Levelling course with P.C.C 1:4:8 (one cement, four sand and eigth course aggregate) using 40 mm H.B.G stone including mixing concrete, laying, curing and compacting of concrete etc., complete and as directed by the TWAD Board Officers.

Earth filling in basement & sides of foundation with excavated earth including ramming and consolidation etc., complete

Supply and filling the foundation and basement with clear river sand in layers complying with standard specification including consolidation and watering etc. complete and as directed by TWAD Board Officers.

For foundation and basement

For super structure

Reinforced cement concrete 1 : 1 1/2: 3(one cement,oneand half sand and three coarse aggregate)using 20mm size hard broken stone jelly(machine crushed) for the following members.The rate to excludethe cost of steel for reinforcement,centering,shuttering, strutting but includingcost of mixing of concrete,placing,vibrating with Mechanical Vibrator, finishing and curing etc. complete and as directed by TWAD Board Officers.

Reinforced cement concrete 1 : 1 1/2: 3(one cement,oneand half sand and three coarse aggregate)using 20mm size hard broken stone jelly(machine crushed) excluding cost of steel fabrication,fixing in position and centring charges but including mixing,lifting and vibrating for SUNSHADE 75mm thick at wall face and 50mm thick at free end projecting 45cm from wall face moulded along with lintel etc. as directed by TWAD Board Officers.

Steel centering for soffits of RCC members including shuttering,strutting to the centring and providing supports etc.complete for the following members using MS Sheets of size 90cm x 60cm and BG 10 Gaugesstiffened with welded MS angles of size 25 x 25 x3mm laid over Silver Oak(country wood) joists of size 10 x 6.5 cm (spaced at about 90cm C/C) and supported by Casurania props of 10 cm to 13 cm dia. spaced at 75 cm C/C and as directed by TWAD Board Officers.The centring materials should be supplied and should be removed after the specified stripping time of the concrete as per IS 456/1978.

Plastering with C.M. 1:5(One part of cement and Five parts of sand) with 12mm thick over brickwork portion including labour charges for mixing finishing and curing etc., complete and as directed by TWAD Board Officers.

Special ceiling plastering for RCC Slab with C.M.1:3(One part of cement and Three parts of sand) 10mm thickover RCC surface including labour charges for mixing finishingand curing etc., complete as directed by TWAD Board Officers.

Flooring in C C 1:4:8 (one cement ,four sand and eight HBS) 10 cm thick using 40mm HBS metal and top finished with Cement mortar 1:3 (one cement and three sand) 12 mm thick including labour charges for mixing,finishing and curing etc. complete and as directed by TWAD Board Officers.

Supply and fixing of MS door (Single leaf) of sizes 1.00 x 2.00m in MS angle 50 x 50 x 4mm and MS flat 35 x 6mm with MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locing arrangements including two coats of approved enamel painting over one coat of primer

Supply, fabricating and fixing in position of RTS rods including cost of steel and binding wire etc., complete.

Supply and fixing of RCC box type jolly of size 0.6 x 0.45 m

Painting two coats with approved cement paint over one priming coat of white cement over cement plastered wall surface and ceiling including cleaning preparing the surface and curing etc., complete (using cement paint of colour as approved by the Departm

White washing two coats using fine screened shell lime for the new plastered surface for inner and outer side of the room including the cost of materials labour charges etc., complete and as directed by TWAD Board Officers.

Weathering Coarse over RCC roof including fixing one coarse of pressed tiles etc., complete.

Provision for writing TWAD Board emblem and scheme details on the side wall of the pump room

Provision of lock and key for pump room and OHT ladder

Levelling the site

SUPPLY DELIVERY AND ERECTION OF SUBMERSIBLE PUMPSETS FOR INDIVIDUAL POWER PUMP SCHEME

Supply and delivery of vertical wet type submersible pumpset (5 HP) capable of discharging any of the following pumpage in lpm against noted head in m suitable for erection into the bore well/Inf. well / open well with stainless steel shaft, bronze impeller and starter.

Supply, delivery and erection of Submersible Pumpset of 125 LPMX 200 Head as per SOR TWAD - Page 88

Supply and delivery of 3 phase Panel Board D.O.L with two level guard and auto start confirming to IS specification for 1 HP pumpset. TWAD SOR Page 101

Supply, delivery of 1.1 KV Grade,PVC insulated and sheathed 3 core flat copper submersible cable with ISI marking conforming of IS 694/1990 of reputed make for submersible motor erected in borewell.

Sq.mm Copper cable page 109 II slno 2

40mm GI Pipe (3m) length Medium SOR TWAD page 25

40mm GI Coupling Heavy page 29

40mm GI Bend Heavy page 29

50mm GI Flangeset Heavy page 29

40mm MS Clampset Heavy page 29

50mm GM Non Return Valve page 30

50 x 40mm GI reducer heavy page 26

63mX50mm PVC T.Coupler page 10

40mm Ball Valve/ GM Gate Valve page 30

Lighting the pumpromm including internal wiring with switch circute fuses etc. with the following light fittings with ISI marking.

40W box type tube light - 1 No.

100W bulb with angle holder

100W bulk head fittings

5 AMPS 3 pin socket with switch

5 Amps switches for light(Flush type)

Providing lighting wiring using MS conduit pipes and specials with 2 runs 1.5 sqmm PVC copper wire and 1 run 12 swg GI wire for earthing for light, fans and 5A plug points etc.,

Obtaining power supply including cost of following materials and by engaging B licence holder.EB fee for application form and deposit amount will be borne by the Board

(i) Aerial fuse board of size 15 x 10 x 6cm with 32 A aerial fuse carrier(3 Nos.)

(iii)Wall mounting type MS cubical EB meter box with fuse carrier (3 Nos) of 32 A capacity at EB supply point.This box is also to accommodate TNEB energy meter with proper ventilation as approved by TNEB.

(ii) Supply and laying of 7/20 size PVC insulator copper conductor cable from Aerial fuse to EB supply point etc., complete as per I.E Rules.

25mm dia GI pipe for service point

25mm dia GI Elbow

No.8 GI wire for earth(Twin earthing)

Stay wire 7/20

20mm GI pipe for twin earthing and cable encasing

4way nutral link

TW banel board (41 x 31 x 6cm)

Labour charges for erection of submersible pump set including fixing and jointing the submersible cable with clamps to the required depth, valves and errection panel board control room twin earthing as per I.E Rules including cost of civil works

Upto 5 HP

Construction of Bore pit arrangements complete ect.

Provision for FHTC 's( 8 Meter Length Per FHTC) & Governnment Building

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

BT ROAD / WBM ROAD CUTTING CHARGES

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

PROVIDING PUMPING MAIN LINE

Earth work excavation in all types of strata for laying of pipes with the standard trench width as per Bd .Circular No. 28/ AE10/ P&D/ 2001/ dt. 01.10.2001 and JCE (P&D)/ Lr.No. LM/ AE10/ P & D/ 2001/ dt.22.11.2001

a. 90 mm OD PVC Pipe 6 KSC

Conveying the PVC Pipes and specials to trench lowering into the trenches, laying to proper grade and alignment, Jointing with PVC coupler and specials fixing with Solvent cement paste and testing to the required pressure as per IS including conveyance etc

Refilling with excavated soil complying with standard specification in layers of 15 cm thick well rammed and consolidated after pipes and specials are laid and tested.

Supply of PVC specials as per BIS 10124/1988 Part 1 to 13 &BIS 7834/1975 with ISI Marks to site of works

a.90mm PVC Bend

b 90mm PVC Threaded coupler

a.80mm GI pipe

a.80mm GI Elbow

b.80mm GI coupling

Laying and jointing of GI Pipes with GI specials and PVC specials etc 80mm dia Pipe

BT ROAD / WBM ROAD CUTTING CHARGES

Providing 20mm SAV along the pumping main alingment 0.3 X 0.45

OHT - SERVICE RESERVOIR - 30000 lit

First depth of 2m From 0 to 2 m below GL

Second depth of 1m

Sand filling for foundation with clear river sand including cost of sand, watering ,ramming and consolidation etc complete as directed by TWAD Board officers

Plain Cement Concrete 1:4:8 (one cement, four sand and eight hard granite broken stone of 40mm size ISS gauge) for foundation and footing including mixing, placing, ramming ,finishing curing etc. complete in accordance with standard specification and as directed by the TWAD Board Officers.

Reinforced Cement Concrete Mix M30 grade using 10mm & 20mm Hard blue granite Broken stone (machine crushed) excluding the cost of RTS rods for reinforcement and centering, strutting, shuttering but including cost of all materials mixing, laying, Vibrating the concrete with mechanical vibrators, ramming, consolidating, finishing and curing etc., Complete and as directed by the TWAD Board Officers.

Below1.5m from GL

Below 0.00 TO 1.5m from GL

For items 0m to 4.5m above GL &1.00 m Above G.L

For items 4.50m to 7.32m above GL

For items 7.32m to 10.98m above GL

For items 10.98m to 14.64m above GL

For items above 14.64m & up to 18.30m from GL

Supply and erection of steel centering, shuttering for soffits and sides including necessary supports and strutting for all RCC works using MS sheets of suitable size of BG10 stiffened with MS angle of size 25 X 25 X 3 mm for boarding laid over I type MS Truss of size 25 X 25 X 3mm about 90cm c/c and supported by 40mm GI pipes (Medium) spaced at 75cm c/c etc complete and as directed by the TWAD Board Officers.

PLANE SURFACES

Below GL

ABOVE G.L. to 3.30m

CURVED SURFACE

Square column

3.31m to 4.30m ht

Painting two coats with approved cement paint over one priming coat of white cement over cement plastered wall surface and ceiling including cleaning preparing the surface and curing etc., complete (using cement paint of colour as approved by the Departmental officer) and as directed by the TWAD Board officers.

Supplying, cutting, bending, tying, fabricating and placing in position of steel rods for all RCC works including cost of steel and binding wire etc.( The steel should conform to the relevant ISspecification and supplied with test certificate Fe. 415 grade as per IS specification No.1786/1985 and as amended from time to time) delivery at site of work including loading, freight, unloading, stacking, transit insurance charges, taxes etc. complete.and as directed by the TWAD Board officers.

Supply delivery and fixing of staircase with M30 grade concrete for landings, MS ladder of 0.45m wide using 50x50x5mm MS angles for sides and steps at 0.30m c/c, with GI pipe handrails using 32mm GI pipes for railings and verical support at 0.45m C/c, MS flats (Size 40mm x 5mm ) for horizontal ties at 0.3m c/c and at bottom with Anchor fastener bolts of size 12mm x 75mm including cost of materials labour for fabrication of handrails fixing, painting etc., complete.

Providing and fixing of RCC inner access ladder in RCC 1:11/2 :3 (one cement,one and half sand and three aggregate) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centring,shuttering charges, mixing concrete,curing etc. to required height and clear width of 45 cm consisting of 2 nos. of vertical post of 10 cm x 15 cm and step slab of 25mm x 25mm etc.complete and as directed by TWAD Board Officers.

Providing 110mm PVC vent cowl arrangements mosquito proof nylon net and as directed by TWAD Board officers

Supply and fixing of cut stone of size 0.30m x 0.30m x 0.15m in CM 1;3(one cement and three sand) below inlet pipe for Service Reservoir as directed by TWAD Board Officers.

Providing manhole cover of size 0.60 x 0.60M in RCC 1:1.5:3 with suitable reinforcement and 50x50x6mm MS angle fixed along edges and as directed by TWAD Board officers

Painting TWAD Board emblem on the SR with enamel paint as per Board's specification and as directed by TWAD Board officers

Pipe connection arrangements for inlet,outlet,scour and overflow etc. including cost of pipes,specials,valve,labour charges for lifting, aligning, cutting, threading ,fixing and painting of GI pipes with two coats of approved quality enamal paint etc. complete as detailed below.

65mm GI pipes for over flow & rain water harvesting pipe

65mm GI pipes for scour pipe

50MM GI Pipe for scour pipe

65mm GI pipe for delivery pipe

90mm PVC Threaded coupler

63mm PVC Threaded coupler

65mm dia GI Tee

65mm dia GI bend 90

65mm dia GI bend (SHORT)

65mm GI coupler

65mm GI union

65mm GI Elbow

50mm GI union

50mm GI Elbow

65mm dia GI Tee

65x50mm GI reducer

75mmx63mm PVC reducer

65mm GM gate valve

50mm GM gate valve

63 mm PVC 4Ksc Pipe

Refilling the foundation with excavated earth including consolidation as directed by the TWAD Board officers

Labour charges for GI pipe connection to the OHT, for inlet, outlet, overflow and scour arrangements including cutting and threading, earth work excavation & refilling.

Providing Hand rails over the Roof slab by using 32 mm GI Pipe with 40mm x 6mm MS Flat and fixied with 12mm dia Fastner Bolt 75mm long and as directed by TWAD Bd officers

Providing Hand rails over the Standing Platform by using 32 mm GI Pipe with 40mm x 6mm MS Flat and fixied with 12mm dia Fastner Bolt 75mm long and as directed by TWAD Bd officers

Provision for levelling the site and SBC test

Water Meter for Pumping Main Lines

Provision for water meter 50 mm , page 81 of SOR TWAD

Dirt box

Erection Charges

Provision for GI & PVC Specials

DISTRIBUTION MAIN - Fixing of Water meter

Provision for 50 mm Water meter - TWAD SOR PAGE 81 , 16 clause

Water meter Dirt BOX

Water meter erection charges

Provision for pit for Gate Value 90X75cm

Provision for GI & PVC Specials

Name Board & Photographs

PROVIDING DISTRIBUTION LINES

Earth work excavation in all types of strata for laying of pipes with the standard trench width as per Bd .Circular No. 28/ AE10/ P&D/ 2001/ dt. 01.10.2001 and JCE (P&D)/ Lr.No. LM/ AE10/ P & D/ 2001/ dt.22.11.2001

a. 63 mm OD PVC Pipe 4 KSC

Conveying the PVC Pipes and specials to trench lowering into the trenches, laying to proper grade and alignment, Jointing with PVC coupler and specials fixing with Solvent cement paste and testing to the required pressure as per IS including conveyance etc

Refilling with excavated soil complying with standard specification in layers of 15 cm thick well rammed and consolidated after pipes and specials are laid and tested.

Supply of PVC specials as per BIS 10124/1988 Part 1 to 13 &BIS 7834/1975 with ISI Marks to site of works

50mm PVC Bend page 12 ,sl.no-3

63mm X 50mm PVC Threaded coupler page 10 SOR

63mm x50 mm PVC Tee IS 7834/1987 page 10

63mm End cap page 12 sl.no 11

a.50mm GI pipe-page 25 sl.no 6

a.50mm GI Elbow page 25 sl.no 1

b 50mm GI coupling page 25, sl.no 3

Laying and jointing of GI Pipes with GI specials and PVC specials etc 50MM GI PIPE

C.C.ROADS

Provision for gate value 80 mm

Provision for pit for Gate Value 90X75cm

Provision for BORE WELL

Geophysical Investigation Charges etc.,Complete

Supply and Delivery of 150mm dia PVC casing pipes including all charges etc., Complete.

Drilling of 150mm dia bore well in hard rock area using DTH rig including cost of transportation charges for Rigs and other supporting vehicle etc., complete.

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

D Settu