Special repair to roads in New Stn Kapurthala under GE Kapurthala

Amount

Material & Labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags/air compressor to remove all loose dirt and applying evenly a priming/tack coat with paving bitumen VG-10/ cold emulsion at the rate of 5 Kg per 10 Sqm on road surface, laying, rolling, consolidating 30mm thick consolidated thickness bituminous premixed semi dense asphaltic concrete carpet with 5.5% binder content of bitumin grade VG-30 by weight of total mix laid with mechanical paver, rolled and compacted to required camber and gradient with pressure roller and 8 to 10 tonne power road roller and be achieved a uniform smooth surface with Pneumatic roller complete all as specified and directed. Note: Mix shall be prepared in hot mix plant as per job mix formula.

Repair to potholes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc cutting around edges to atleast 25mm in depth and applying tack coat with paving bitumen VG-10/Cold Emulsion at the rate of 5 kg per 10 sqm , making good by filling in screened and graded road metal, watering and well ramming(including supply of road metal)

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm

M&L for Premix Bituminous macadam laid/ rolled and compacted to required gradient and camber consolidated thickness not more than 75 mm using paving bitumin of any penetration as binder content 4% by weight of total mix complete all as specified and directed.

Material & Labour for providing and marking 2mm thick broken centre line /side lines / Zebra lines, dashes, arrows etc. on road pavement and the like of any description and width with white thermoplastic paint hot applied with machine conforming to BS-3262 and according to the specification laid down by IRC and MOST (Ministry of Surface Transport) specification 2001 (4th revision) complete all as specified and directed.

S&F in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens with reflector of model no. DA 972.0 fixed with and incl. MS stud of suitable size as per manufacturers instruction.

S&F in repair solar cat eye (SOLAR STUDD) aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency monorystafie solar panel 2.4V/ 1600MA) consisting of super Led with 10000-18000 MCD completed as per manufacturers instruction etc all as specified and directed.

S&F Speed breaker size (0.50m x 1.00m) x 50mm height in four pieces (2 piece black and 2 piece yellow colour) complete as per manufacturers instruction etc all as specified and directed by Engineer-in-charge.

M&L for one coats of synthetic enamel paint on old surfaces of road side kerb stone any type , any description over 10 cm width or girth not otherwise described incl. preparation of old surfaces all as specified and directed by engineer-in-charge

M&L for two coats of synthetic enamel paint on newly plastered/repaired surfaces of road side kerb stone any type , any description over 10 cm width or girth not otherwise described incl. preparation and priming coat of newly plastered surfaces of kerb stone all as specified and directed by engineer-in-charge Note : Cost of repair of kerb stone by any means like plastering or concreting deemed in this item

Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

J.K & Company

M/s Randhawa Builders