REPAIRS TO FLOORING PLATFORM JOINERY PLASTER WORK SUNKEN FLOOR TREATMENT SEWAGE LINE MANGALORE ROOF TILE PLUMBING SANITARY ALONG WITH MISC B R WORK IN MD OTM ACCN AT GANESHKHIND UNDER AGE BR PASHAN PUNE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc and clearing off the premises complete all as specified and directed.

Material and labour for non skid coloured (other than off white) ceramic tiles in floor joint free 7 to 8mm thk of area exc 0.11 sqm but n. exc 0.18 sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of cement mortar 15mm thick in cement mortar 1:6 complete all as specified and directed.

Material and labour for non skid coloured (other than off white) ceramic tiles in floor joint free 7 to 8mm thk of area exc 0.06 sqm but n. exc 0.11 sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of cement mortar 15mm thick in cement mortar 1:6 complete all as specified and directed.

Material and labour for coloured pattern glazed ceramic tiles 6 to7mm thick of area 300 x 450mm as in skirting, dados etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match cement plaster on fair faces of brick or concrete surfaces incl, 10mm thick in cement mortar 1:6 finished rough (backside of dado& skirting) complete all as specified and directed.

Material and labour for double charged / Ultra charged vitrified ceramic tiles 8 to 9 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm as in flooring set and joined in neat cement slurry and pointed in coloured cement to match coloured tiles over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for Double charged / Ultra charged vitrified ceramic tiles 8 to 9 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm as in skirting set and joined in neat cement slurry and pointed in coloured cement to match coloured tiles over 10 mm thick cement plaster in cement mortar 1:6 complete all as specified and directed.

Dismantling of Stone slab and tiles of any size and description or thickness in floors, dados & aprons etc., laid bedded and pointed in any mortar complete all as specified and directed..

Material and labour for 20mm thick granite (of any type) work (Table rubbed and polished) in steps, jambs, pillars, windows cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite complete all as specified and directed.

Material and labour for Machine cut cudappa stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, platform, and other similar situations complete all as specified and directed.

Drilling holes on granite, cudappa or trap stone for bolts. Pipes, etc. n.exc 25 mm dia complete all as specified and directed.

Material and labour for polishing of existing terrozo tile by rubbing with grinding machine including using 220-350 grit carborundum stone repair & filling of joints, cement with pigment to match the existing tile washing thoroughly and finally polishing with bee wax polish complete all as specified and directed by Engr-in-charge.

Material and labour for polishing of existing terrozo tile dado/skirting by rubbing with grinding hand machine including using 220-350 grit carborundum stone repair & filling of joints, cement with pigment to match the existing tile washing thoroughly and finally polishing with bee wax polish complete all as specified and directed by Engr-in-charge

Taking down of door/window shutter and refixing the same after necessary easing for smooth functioning of any size complete all as specified and directed.

Taking down shutter only of any description n.exc. 1 Sqm each and removing from site complete all as specified and directed.

Taking down shutter only of any description exc. 1 Sqm but n. exc. 2 Sq m each and removing from site, complete all as specified and directed.

Taking down shutter only of any description exc. 2 Sq m each and removing from site, complete all as specified and directed.

Taking down chowkat or frame not exceeding 1.50 Sq m each with shutters (without taking off shutters from the frame) and removing from site, complete all as specified and directed.

Taking down chowkat or frame exceeding 1.50 Sq m but not exceeding 4.00 sq m each with shutters (without taking off shutters from the frame) and removing from site, complete all as specified and directed.

Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames, wrought framed, rebated on the solid, rounded or chamfered, put to gether with glue pined at joints, kiln seasoned and chemically pressure treated including additional rebate for fixing second shutter etc, complete all as specified and directed.

Supply and fix mild steel flat iron as in hold fasts and similar small work confirming to Fe 290 Gde E-165 complete all as specified and directed.

Supply and fix 125mm x 60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

Material and labour for plain cement concrete Type C1, 1:3:6 (using 20 mm graded crushed stone aggregate) for filling of hollow pressed steel frame complete all as specified and directed.

Material and labour for plain cement concrete Type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregate) for fixing hold fast including repairing of disturbed plaster (while taking down Door/window,ventilator frame) and matching the repaired surface with existing one complete all as specified and directed.

Supply and fix 35 mm thick factory made shutters of 2nd class HW rail & style, plain,framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (part-I), kiln seasoned and chemically pressure treated, fixed to chowkat complete all as specified and as directed.

Supply and fix 30 mm thick factory made shutters of 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass or gauge etc, with sash bars, edges of sash bars framing, moulded, fitted with cut and mitred beads for securing glass or gauge etc sizes of members of shutters as specified in SSR part - I, section 8 clause 8.20 (a) kiln seasoned and chemically pressure treated, complete all as specified and directed.

Supply and fix 30 mm thick factory made shutters of 2nd class hard wood glazed and skelton window shutters, open rebated and prepared to receive glass or gauge etc, with sash bars, edges of sash bars framing, moulded, fitted with cut and mitred beads for securing glass or gauge etc sizes of members of shutters as specified in SSR part - I, section 8 clause 8.20 (b) kiln seasoned and chemically pressure treated, complete all as specified and directed.

Supply and fix 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fix Factory made PVC solid door frame or chowkat of size 50 mm x 47 mm, made out of 5mm plain colour PVC sheet reinforced with mild steel square tube etc, including necessary hold fasts, complete all as specified and directed.

Supply and fix Factory made solid panel PVC door shutter plain 30 mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with and including heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with and including solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with and including solvent cement and fixed in the frame complete all as specified and directed

Supply and fix 100 mm Butt hinge, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

Supply and fix 100 mm Butt hinge, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed. Type B-21 complete all as specified and directed.

Supply and fix 200 mm Aluminium anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.

Supply and fix 150 mm extruded aluminium alloy handle, fabricated type, anodised and fixed complete all as specified and directed.

Supply and fix 300 mm Mild steel sliding door bolt, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Supply and fix aluminium door stopper of size 60mm to 75 mm long double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base fixed with door shutter with screws at appropriate height complete all as specified and directed.

Preparing new wood and wood based surfaces and applying two coats of Synthetic enamel paint over a coat of pink primer over 10 cm width/girth complete all as specified and directed.

Supply and fix Stainless steel wire cloth 0.254mm (30Gauge) nominal dia of wire and average width of aperture 0.95mm and fixed with stainless steel wire staples/nut boults, etc with including necessary wooden beads all as directed by Engr -in - Charge complete all as specified and directed.

Supply and fixing in repairs Stainless steel wire cloth 0.254mm (30Gauge) nominal dia of wire and average width of aperture 0.95mm and fixed with stainless steel wire staples/nut boults, etc with including necessary wooden beads all as directed by Engr -in - Charge complete all as specified and directed.

Supply and fixing in repairs 100mm butt hinge medium weight cold rolled mild steel complete all as specified and directed.

Supply and fixing in repair 100 mm Butt hinge, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed. Type B-21 complete all as specified and directed.

Supply and fixing in repairs aluminium anodised barrel tower bolt of extruded section length of bolt 200mm complete all as specified and directed.

Supply and fixing in repairs aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolt and sliding bolt of extruded sections or cast aluminium alloy length of bolt 300mm complete all as specified and directed.

Supply and fixing in repairs extruded Aluminium alloy handle, fabricated type anodised size 150 mm complete all as specified and directed.

Supply and fixing in repairs 125mm size hasp and staple alluminium anodised including bolt to hinge plate and fixed with screw complete all as specified and directed.

Supply and fixing in repairs aluminium door stopper of size 60 to 75 mm long double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base fixed with door shutter with screws at appropriate height complete all as specified and directed.

Material and labour for repairing unserviceable window/ door, any size, by replacing damaged/ missing parts of mild steel windows/door & making good (easy to opening/closing) complete all as specified and directed. Note :- Spare parts to be replaced shall be measured separately as supply only.

Supply only Projecting type mild steel hinge (for windows) complete all as specified and directed.

Supply only Mild steel handle for steel windows with necessary closing arrangement to match the existind windows complete all as specified and directed.

Supply only Mild steel peg stay, 300 mm long complete all as specified and directed.

Supply and fixing in repairs 18/19 mm pre- laminated particles board interior Gde, pre-laminated one side with decorative one side with decorative choice lamination & other side balancing white laminateion fixed with screws to timber frame work. (for cupboard shutter and shelves) complete all as specified and directed.

Supply and fixing in repairs 18/19 mm pre- laminated particles board interior Gde, pre-laminated one side with decorative one side with decorative choice lamination & other side balancing white laminateion fixed with screws to timber frame work. (for pelment boxes) complete all as specified and directed.

Material and labour for 2 nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads. area n.exc 3 Sq cm kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing in repairs Curtain rod Stainless steel of grade 304, 20/25 mm dia heavy grade curtain rod as per windows and door size including finials (brackets on end) with brackets duly screwed on wall with plastic roll plug and stainless steel screw of 38 mm long complete all as specified and directed.

Supply and fix 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane including hacking out old broken glass any thickness, size from metal frame, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fix 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane including hacking out old broken glass any thickness, size from wooden frame, glazed with putty or fixed with beads.

Supply and fix 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares exceeding 0.5 Sqm in each pane including hanging out old broken glass any thickness, size from metal frame/ wooden frame, glazed with putty or fixed with beads complete all as specified and directed.

Taking out old serviceable glass of any description, from old wooden or metal frames, hacking out old putty or removing beads etc, including making good breakages in taking out and refixing in same opening with using oil putty or wooden beads, complete all as specified and directed.

Supply and fixing in repairs 2nd class hardwood plain fillets square, rectangular or triangular in sectional area exc 3 Sq.cm & n.exc 6 Sq.cm , clean sawn, kiln seasoned and chemically pressure treated secured with nails complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour for plastering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished the surface even and smoth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered wall surface and applying two coats of water based distemper over a coat of primer incl 3mm thick wall care putty complete all as specified and directed.

Material and labour for plastering 15mm thick in two layers VIZ : first layer 10mm thick in cement mortar 1:6 on brick masonry or on concrete surfaces and second layer 5mm thick in cement mortar 1:4 with water proofing compound as per maufacturers instructions complete all as specified and directed. Note: WPC shall be measured and paid seperately as supply only.

Material and labour for plastering 15mm thick in two layers VIZ : first layer 10mm thick in cement mortar 1:6 on stone masonry surfaces and second layer 5mm thick in cement mortar 1:4 with water proofing compound as per maufacturers instructions complete all as specified and directed. Note: WPC shall be measured and paid seperately as supply only.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as per manufacturer's instructions and complete all as specified and directed.

Material and labour for 5mm thick cement plaster on cement concrete surface as in ceiling in cement mortar 1:3 finished surface even and smoth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered celling and applying three coats of white wash complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Taking up or down 15 mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. NOTE : Cutting chases and making good where required shall be measured and paid for separately.

Refixing old serviceable steel tubing of 15mm bore and conections in new or old positions (Walls, ceiling, floors etc) complete all as specified and directed.

Supply and fix 15mm bore Tubes Medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Refixing serviceable old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed.

Supply and fix 20 mm bore Tubes Medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.

Cutting chases, pinning in, making good to facings of brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

Supply and fixing in repairs 15mm bore bib tap fancy type, cast copper alloy, chromium plated, with cruth or butter fly handle, screwed down for iron pipe complete all as specified and directed.

Fixing only in repairs 15mm bore bib tap of any type complete all as specified and directed.

Supply and fixing in repairs 15mm bore pillar tap fancy type, cast copper alloy, with capstain heads, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed.

Fixing only in repairs 15mm bore pillar tap of any type complete all as specified and directed.

Supply and fixing in repairs shower rose 50 mm dia rim CP suitable for 15 mm bore pipe complete all as specified and directed.

Supply and fixing in repairs 15 mm bore stop valve/angle valve fancy type, chromium platedcast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

Fixing only in repairs 15mm bore stop valve/angle valve of any type complete all as specified and directed.

Supply and fixing in repairs PVC connection pipe 15mm dia and 450mm long complete all as specified and directed.

Supply and fixing in repairs PVC waste pipe 32mm dia for WHB/Sink (Make-as per sample) complete all as specified and directed.

Supply and fix waste coupling brass CP for glazed ware sink, WHB etc with long screwed shanks and fly nuts complete of 32mm dia complete all as specified and directed.

Supply and fixing in repair MS CP grating 100mm size fixing with white / gray cement (suitable forToilet, Bathroom, WHB and Kitchen sink) complete all as specified and directed.

Supply and fixing in repairs, vitreous China wash basin, Ivory, flat back, size 550mm x 400mm including brackets, 15mm dia pillar tap cast copper alloy chromium plated, 32 mm dia brass CP waste coupling with long screwed shawles and flynuts, flanged end bedded in red lead cement and PVC connection 15 mm dia with PTMT nuts 450 mm long complete all as specified and directed.

Supply and fixing in repairs, vitreous China wash basin, Ivory, flat back, size 450mm x 300mm including brackets, 15mm dia pillar tap cast copper alloy chromium plated, 32 mm dia brass CP waste coupling with long screwed shawles and flynuts, flanged end bedded in red lead cement and PVC connection 15 mm dia with PTMT nuts 450 mm long complete all as specified and directed.

Fixing only in repairs wash hand basin any size, any type including new brackets of suitable size of WHB including bracket complete all as specified and directed.

Supply and fixing in repairs PVC valveless syphonic action type flushing cistern 10litres capcity low level, white with inlet ball valve, float and handle including brackets flush pipe of polythene of low or high density of PVC 32mm dia for low level cistern complete all as specified and directed.

Fixing only in repairs Flushing Cistern any size, low/high level any type including new brackets of suitable size complete all as specified and directed.

Supply and fixing in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with aluminium alloy brackets and guard rail complete all as specified and directed.

Supply and fixing in repairs stainless steel tubulor towel rail 20mm dia , D type, 60 cm long 1.6 mm thick complete all as specified and directed.

Supply and fixing in repairs Towel ring of stainless steel , 200mm size, 1.6 mm thick complete all as specified and directed.

Supply and fixing in repairs, sink made of stainless steel 1 mm thk kitchen with plugs, washers and wastes incl bedding in cement mortar on to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 495mm X 420mm bowl size size 410mm X 330 mm X 160mm complete all as specified and directed.

Supply and fix in repairs, sink with drainage board made of stainless steel 1 mm thk kitchen with plugs, washers and wastes incl bedding in cement mortar on to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm bowl size size 410mm X 330 mm X 160mm complete all as specified and directed.

Supply and fix vitreous china wash down water closet pan (pedestal pattern) ivory coloured with integrated 'P' or 'S' trap outlet including conection to flush pipe and out going pipe and plastic watercloset seat cover ivory coloured closed pattern with flat bottom and PTMT hinging device complete all as specified and directed.

Supply and fix in repairs vitreous china water closet squatting pan 'orissa pattern, ivory coloured of size 580mm x 440 mm, with integral foot rest and outlet for 'P' or 'S' trap , WC pan shall be set in lean concrete below level of rim of pan to receive the floor finish complete all as specified and directed.

Supply and fix in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm ² fixed complete to walls, ceilings or in floors etc. including all pipe fittings complete all as specified and directed.

Supply and fix in repairs 32 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm ² fixed complete to walls, ceilings or in floors etc. including all pipe fittings complete all as specified and directed.

Material and labour for in repairs 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete type B1 1:2:4 using 20mm graded crushed stone aggregate including necessary form work complete all as specified and directed by Engineer-in-Charge.

Demolition and breaking up drain PVC (SWR) pipes jointed in cement mortar/solvent, internal dia of pipe upto 110mm in any position with wall or in floor etc complete all as specified and directed.

Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed.

Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed.

Supply and fix 75 mm PVC (SWR) bend any radius complete all as specified and directed.

Supply and fix 75 mm PVC (SWR) bend any radius with acess door complete all as specified and directed.

Supply and fix 110mm PVC (SWR) bend any radius complete all as specified and directed.

Supply and fix 110 mm PVC (SWR) bend any radius with acess door complete all as specified and directed.

Supply and fix 75 mm PVC (SWR) branch piece single (single Y) equal or unequal with access door complete all as specified and directed.

Supply and fix 110 mm PVC (SWR) branch piece single (single Y) equal or unequal.with access door complete all as specified and directed.

Supply and fix 75 mm PVC (SWR) junction single (T single) equal or unequal.with access door complete all as specified and directed.

Supply and fix 110 mm PVC (SWR) junction single (T single) equal or unequal with acess door complete all as specified and directed.

Cleaning and removing all scale and dirt etc from water tanks and from mouths of circulating pipe exc 500 and n.exc 1000 litres capacity tank. After cleaning write the date of cleaning with paint on tank complete all as specified and directed.

Cleaning and removing all scale and dirt etc from water tanks and from mouths of circulating pipe exc 250 and n.exc 500 litres capacity tank. After cleaning write the date of cleaning with paint on tank complete all as specified and directed

Supply and fix in repair stainless steel plate rack of size 450mm X 600mm made out of 1mm thick stainless steel sheet of grade 304 fixed all as per manufacturers instructions complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs brass chromium plated health foucet 600mm long for EWC complete all as specified and directed.

Supply and fix in repairs two way bib cock complete all as specified and directed. Cat No CQT 23041 Make : Jaquar or equivalent as specified in appendix 'B' as approved.

Dismantling of water tank of 500 litres capacity and removing to store and Supply and fix of 500 litres capacity rotational moulded polythelene water storage tank ISI marked (Cylindrical vertical with closed top) triple layered, hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

Dismantling of water tank of 1000 litres capacity and removing to store and Supply and fix of 1000 litres capacity rotational moulded polythelene water storage tank ISI marked (Cylindrical vertical with closed top) triple layered, hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

Disconnecting exc 250 litres and n exc 500 litres existing tank, setting aside (or lowering if required) for repairs, cleaning, etc. andhoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed.

Disconnecting exc 500 litres and n exc 1000 litres existing tank, setting aside (or lowering if required) for repairs, cleaning, etc. andhoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed.

Supply and fix in repairs 250/500/1000 litres capacity PVC water tank cover including necessary MS and plastic clips complete all as specified and directed.

Supply and fix in repairs ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20mm bore dia of pipe etc complete all as specified and directed.

Supply and fix in repairs 20mm gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified and directed.

Material and labour for closing Rat holes in Cement concrete 1:2:4 Type B1 (using 20 mm graded crushed stone aggregate) and finished with cement mortar 1:6 including Cutting out concrete blocks, slabs, brickwork or stone, masonry and making good to old wall surface with existing complete all as specified and directed.

Demolition of brick work/ stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

Material and labour for PCC block masonry with solid blocks, exc 10 cm in width and setting cement mortar 1:6 precast cement concrete block of type C-1 with 1:3:6 (using 20 mm graded stone aggregate) complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and n.exc 1.5 m in depth for foundation etc or shaft, wells, cesspits, manholes, pier holes etc n.exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and n.exc 1.5 m in depth for foundation etc or shaft, wells, cesspits, manholes, pier holes etc n.exc 1.5 m in depth and getting out in soft disintegrated rock complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soils complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reformong benching as required for 150 mm dia pipe complete all as specified and directed.

Material and labour for 150 mm internal diameter Reinforced concrete pipes, class NP2, laid and jointed complete with collars, laid in trenches on concrete bed or directly on hard ground complete all as specified and as directed.

Material and labour for 200 mm internal diameter Reinforced concrete pipes, class NP2, laid and jointed complete with collars, laid in trenches on concrete bed or directly on hard ground complete all as specified and as directed.

Material and labour for cement concrete type C2, 1:3:6 mix (using 40 mm graded crushed stone aggregate) as in bed to drain pipe including packing under and haunching against the sides of pipes after laying in trenches to required slope and tested for 150 mm bore of pipe, complete all as specified and directed by Engr - in - Charge.

Material and labour for cement concrete type C2, 1:3:6 mix (using 40 mm graded crushed stone aggregate) as in bed to drain pipe including packing under and haunching against the sides of pipes after laying in trenches to required slope and tested for 200 mm bore of pipe, complete all as specified and directed by Engr - in - Charge.

Material and labour for cement concrete type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) in coping, kerbs, benching channels to man holes etc, curved portion (any girth/width) etc, including necessary form work, finished even & smooth with using extra cement all as specified.all as specified.

Cleaning of existing of sewage lines up to 1.00 m depth from ground level by rodding or by any means and getting out mud, sludge etc and washing the line withflush water through pipes including disposing; the sludge/ rubbish at a distance exc 100m but n.exc 200 m for dia bore of pipe 150 mm complete all as specified and directed.

Cleaning of existing of sewage lines up to 1.00 m depth from ground level by rodding or by any means and getting out mud, sludge etc and washing the line withflush water through pipes including disposing; the sludge/ rubbish at a distance exc 100m but n.exc 200 m for dia bore of pipe 200 mm complete all as specified and directed.

Cleaning of existing of sewage lines depth exc 1.00 m but not exc 2.00 m from ground level by rodding or by any means and getting out mud, sludge etc and washing the line withflush water through pipes including disposing; the sludge/ rubbish at a distance exc 100m but n.exc 200 m for dia bore of pipe 150 mm complete all as specified and directed.

Cleaning of existing of sewage lines depth exc 1.00 m but not exc 2.00 m from ground level by rodding or by any means and getting out mud, sludge etc and washing the line withflush water through pipes including disposing; the sludge/ rubbish at a distance exc 100m but n.exc 200 m for dia bore of pipe 200 mm complete all as specified and directed.

Cleaning of existing manhole of any size and n. exc 1.00mtr depth from GL including removing sludge, silt, solid particles etc and washing the MH with fresh waterand disposing off the same to a distance not exc 50 m and berried the same complete all as specified and directed.

Demolition of cement concrete in below or above ground level n. exc 150 mm thick complete all as specified and directed.

Material and labour for applying acrylic cementicious polymer modified elastomeric waterproofing & protective coating like brush bond of Fosroc or Pidifin 2K (Pidilite) as per manufacturer instructions on rendered surfaces of floor and wall of sunken portion complete all as specified and directed.

Material and labour for PCC 1:4:8,Type D-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete (sunken portion) complete all as specified and directed.

Material and labour for PCC 1:2:4, 25mm thick type B-1 using 20mm graded crushed stone aggregate as in sub base complete all as specified and directed.

Dismantling Plain or corrugated Asbestos cement sheet etc in roof covering complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Supply and fix Rolled mild steel Framed brackets, rafter, purlins, rails and similar work (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.confirming to Fe-290 (gde E-165) including cutting, drilling, welding or connecting to bolts and nuts complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling single layer manglore pattern or similar pattern tiles in roofing complete all as specified and directed.

Dismantling battens for tiles of any size including tilting fillets spaced exc 15cm. complete all as specified and directed.

Supply and fixing 0.63 mm thick galvanised corrugated mild steel sheeting, class-8 with two corrugations side lap, bent to a curve, fixed with L-type or J-type or cranked hook bolts and washers, in roofs etc., complete all as specified and as directed.

Material and labour for IInd class hard wood clean sawn battens sectional area exc 5 & not exc 15 sqcm fixed at 30 cm centres kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour for IInd class hard wood clean sawn battens sectional area exc 5 & not exc 15 sqcm fixed at 30 cm centres using old serviceable battens complete all as specified and directed.

Material and labour for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote complete all as specified and directed.

Material and labour for Second class hard wood weather boarding, 25 mm thick, wrought both sides, V-jointed to give 20 mm laps and in repairs to replace old or decayed boarding in patches, including cutting out old, piecing, heading joints etc., fixed complete all as specified and directed.

Material and labour for roof tiles, Manglore pattern, interlocking at side joints laid dry complete all as specified and directed.

Material and labour for roof tiles, Manglore pattern, interlocking at side joints laid dry using old serviceable tiles complete all as specified and directed.

Material and labour for Ridges or hip tiles to suit Manglore pattern of roofing tile, bedded and jointed in cement mortor 1:6 complete all as specified and directed.

Material and labour for using old serviceable ridges or hip tiles to suit Manglore pattern of roofing, bedded and jointed in cement mortor 1:6 complete all as specified and directed.

Supply and fix in repairs Plain, galvanished, mild steel sheeting, 1 mm thick in ridges, hips, valley gutters, drip & straight flashings (length & grith as fixed)with grade of zinc coating complete all as specified and directed.

Cleaning of shrubs growth on bldgs and making good the damaged portion in cement mortar 1:3 and match the existing surfaces of wall in any height etc. Complete all as specified and as directed by Engr-in-charge.

Supply and fix mild steel framed work such as grills gratings etc with ends of bars shouldered or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framed work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Complete removal of exisitng water proofing treatment in any layers and removal of debris to a distance exc 150m and n exc 250m fronm the site complete all as specified and directed.

Material and labour for 40mm average thickness PCC 1:2:4 type B1(using 20mm graded crushed stone aggregate) as in levelling course to match the undulations of roof and in covering etc including necessary form work complete all as specified and directed.

Material and labour for APP based polymeric membrane weighing 3.0 kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than160gms/Sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 ltr/sqm complete all as specified and directed. Four course roof treatment consists of as under :- (a) Applying one coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr per sqm. (b) Laying of APP based membrane as specified thickness and weight. (c) Applying one coat of bitumin grade 85/25 @ 1.2 Kg/Sqm. (d) Applying two coats of aluminium paint @ 100ml/sqm each coat NOTES : (i) The wrok shall be executed through authorised applicator of manufacturer (ii) The contractor has to submit guarantee for 10 years.

Material and labour for 10mm thick in cement mortar 1:3 mixed with water proofing compound of approved make as per manufacturer's instructions over freshly laid cement concrete in roof slab finished even and smooth by using steel trowel complete all as specified and directed. (WPC shall be measured and paid for separately as 'supply only'.

Material and labour for applying two coats of aluminium paint @ 100ml/sqm in each coat over existing APP water proofing tratment at roof slab complete all as specified and directed.

Material and labour in repairs for applying two coats of aluminium paint @ 100ml/Sqm in each coat over and including one coat of bitumin grade 85/25 @ 1.2 Kg/Sqm.over existing APP water proofing tratment at roof slab complete all as specified and directed.

Supply and fixing in repairs aluminum anodised powder coated (minimum thickness of powder coating 50 micron) JINDAL section, three track sliding shuttter window with and including two shutters of 4mm thick plain glass and one shutter of stainless steel mosquito mesh with and incl 0.36mm nominal dia of wire and average width of aperture 1.4mm alongwith good quality of bearing, locks PVC rubber lining etc complete all as specified and directed. The various sections shall be of following Cat Nos of make Jindal or equivalent as specified in appendix 'B' as approved be GE :- a) Three track bottom - 20957 b) Three track top/vertical - 20958 c) Handle - 20606 d) Interlocking - 20605 e) Top and bottom - 20604

Supply and fix in repairs Powder coated (minimum thickness of powder coating 50 micron) aluminum snap grid frame work for false ceiling with aluminum angle 25mmx25mm51.5mm fixed to perimeter of wall, main T runner 38mm x 25mm x 1.5mm and secondary/cross T runner 25mm x 25mm x 1.5mm to be interlockeed in such a way that the size of grid shall be 605mm x 605mm incl 6mm dia GI hangers adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40mm x 3mm, 60mm long and expansion hold fasteners 12.5mm dia, 40mm long and 4mm thick Non asbestos fibre board (E board or V board) designer tiles (Eectra) suitably fixed in false ceiling grid/frame with staples or screws incl dismantling of ceiling boards (fibre pulp, insulation etc) of insulation board/Slabs blankets any thickness, incl cover fillets complete all as specified and directed.

Material and labour for precast cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holesetc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed. Reinforcement shall be measured and paid for separately.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, Including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or ecuring with clips complete all as specified and directed.

Mild steel bars 6mm to 8mm dia and over, cut to length, bent to shape required, Including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or ecuring with clips complete all as specified and directed.

M/S.J.V.Datar

M/s S.R lahoti

sanjay m. suryawanshi

S.K.HARAL

M/S NILESH BUILDERS

R. K. Industrial Fabricators

Vipul Enterprises