Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.9 LAccepted-AOC NEAR MES FILTER PLANT SANGOOR UDHAMPUR J K 182101 | UDHAMPUR | UDHAMPUR | J K | 182101 | L1 | Accepted-AOC L1 | |
| 2 | L2₹42.5 L+₹2.6 L (6.62%)Rejected-Finance 6 RAILWAY STATION ROAD ONKAR INDUSTRIES GULAMALI PURA BAHRAICH UTTAR PRADESH 271801 | BAHRAICH | UTTAR PRADESH | 271801 | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹43.1 L+₹3.3 L (8.25%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹43.2 L+₹3.4 L (8.48%)Rejected-Finance 53 HOUSING BOARD COLONY PHASE II UDHAMPUR 182101 J K | UDHAMPUR | UDHAMPUR | J K | 182101 | L4 | Rejected-Finance OTHER THAN L1 | |
| 5 | L5₹45.8 L+₹5.9 L (14.9%)Rejected-Finance HOUSE NO 108 WARD NO 08 SHAKTI NAGAR DHAR ROAD UDHAMPUR UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L5 | Rejected-Finance OTHER THAN L1 |
Tender Value
Refer Docs
EMD Value
₹81,600
Closing Date
19 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (UTILITIES) UDHAMPUR
GE (UTILITIES) UDHAMPUR, PO-GARHI, PIN-182121
Provn of lightening protection system in certain offices under GE (Utilities) Udhampur.
2022_MES_540239_1
GE/U-32/2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE (UTILITIES) UDHAMPUR
Please refer Tender documents
8 documents required · 8 mandatory
₹500
GE (UTILITIES) UDHAMPUR
₹81,600
Yes
17 Sept 2022
22 Jul 2022
23 Aug 2022
22 Jul 2022
19 Aug 2022
5 Aug 2022
Amount
Supply,installation, testing and commissioning of Air termination copper rod of 12mm dia and 300mm long, Single pointed. Protection level I with protection efficiency 0.98 complete all as specified and directed by Engr-in-Charge. Note : (a) Air termination rod shall be fixed on the housing with the help of base pole, connectors & PCC foundation (b) Site clearance shall be provided post fixing of termination rod. (c) Any addition /alteration required at site shall be done by the contractor. Make:- Ashlok/Baron/Macmate.
Copper Strip 25x3 mm with PVC insulators/ saddles and fixing screws etc. for roof conductors and down conductors complete all as specified and directed by Engr-in-charge. Note : (a) Necessary T&P required for fixing of Copper strip is inclusive of rate quoted by contractor. (b) Site clearance after fixing shall be done by the contractor.
Ligtning conductor/Protection Rod with following specifications:- (a) Height of primary terminal = 1000mm. (b) Diameter of Rod = 22-25 mm. (c) Tip of Rod = Tapered tip/Sharp Edge. (d) Scondary Terminal = Shall attached to bowl. (e) Dimension of Bowl = 125 mm wide x 4mm thick. (f) Direction = Facing the primary terminal on 4 sides. (g) Electrolyte = Copper. (h) Additional protection = Nickel plated tip for corrosion resistance & side flash capture. (i) Confirmation = IEC 62305. (j) Weight = 6.0 Kgs. (k) Construction :- Protection system shall consist of one primary and four secondary air terminals. The Primary air terminal is a vertical conductive rod having a sharp tip at one end. The secondary air terminal (4 No) formed on a bowl shaped circular disc are fixed on vertical rods. further, the actual points of the secondary terminals are spaced and placed in such a way to receive the maximum side flashes. Work shall be executed complete all as specified and directed by Engr-in-Charge. (l) ISO Certification = ISO 9001 : 2015. (m) Current Capacity (Tested) = 40 Ka. (n) Dia of SFCH (mm) = 125. (o) Base Plate dimension (mm) = 150 x 150 x 6. Make:- Ashlok(Zeus)/Baron/Macmate.
Supply , installation, testing & commissioning of maintenance free compound based electrode earthing with following Specifications:- (a) Type = Copper Bonde Rod (b)Material = Low carbon steel core (SAE 1018) (c) Length = 3000mm (d) Dia of rod = 17mm (e) Coating Thickness = 250 microns (f) Terminal = U Bolt Clamp or equivalent (g) Tolrence in length = ± 20mm (h) Tolrence in diameter = ±1.0mm (i) Torence in thickness = ±0.03mm (j) Current with stand = 10 KA for 1.0 sec and 25 KA peak (k) Frequency = 50 Hz (l) Back fill compound = BARON ELECTRODITE (ROHS Certification) (m) PIT Cover = FRP (or) EPCC (n) Granular material resistance = 0.001 Ohm (o) Mixer ratio with cement = 3:1 Note:- Electrode top terminal shall be sealed permanently packed with conductive concrete and CU bonded strip taken out be terminated on earth test point and equipped terminal. Make:-Ashlok(Zeus)/Baron/Macmate
Test point terminal block made of gun metal or phosphorous bronze size 75x75x25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw complete all as specified and directed by Engr-in-Charge
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of under ground cable and getting out in soft/ loose soil complete all as specified and directed by Engr-in-Charge.
Returning, filling in, excavated soil in trenches including spreading , levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr-in-Charge.
Removing of excavated soil to a distance not exceeding 50mtr and deposited where directed at a level not exceeding 1.5 mtr above starting point complete all as specified and directed by Engr-in-Charge
DWC (Double wall corruguated) pipe 50x32 mm conforming to IS: 14930/ IS 16205 for protection of earth strip including necessary snap-fit coupler required for fixing complete all as specified and directed by Engr-in-Charge.
MOHAN LAL AND SONS
D P ASSOCIATES
vijay kumar gupta and co
slathia construction works
BARU ENTERPRISES
ARNABH ASSOCIATES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .