Construction of open stage at Shivagiri area in ward no 18 of Dharwad.

Construction of open stage at Shivagiri area in ward no 18 of Dharwad.

Mechanical Means -

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

Mechanical Means -

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

Providing Size Stone masonry with hard stone in foundation & plinth with

Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse s...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 15...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

PProviding & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plasti...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dus...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer...

polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings...

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of j...

Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing C.P. brass stop cock (concealed) of standard design

and of approved make conforming to IS:8931.

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing CP brass 32mm size Bottle Trap of approved quality

& make and as per the direction of Engineer-in-charge.

Providing and fixing unplasticised PVC connection pipe with brass unions : 30 cm length - 15 mm nominal bore

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore

Providing and fixing brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 32 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

Shuttering for Foundation works a) Isolated 8%

Shuttering for Columns

Shuttering for Columns & Piers (70%)

Shuttering for Plinth Beam (50%)

Shuttering for Beams & Lintels of Building (60%)

Shuttering for Roof (Straight & Arched) (50%)

Shuttering for Chejjas, Canopy & Other Architectural projections of minor sections (45%)

1.1kV LTUG XLPE Insulated Cables as per IS-7098 (Part-1) with following parameters & as per BESCOM Requirements:

H2 H4 grade Aluminium Conductor

having purity of 99.7%

Conductor Resistivity of 0.0282...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT cable 21.05) 2.5 to 25 Sqmm item no.21.05 page no. 201 (labou...

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable 35.01) Up to 4C x 50 Sqmm ESCOM SR 2025-26 page no. 155 item no.35.01 (material rate)

Earthing GI Grounding pipe, B - Class, 42 mm dia, 2.5 M long, 3.2 mm thick with bolts nuts, GI Strips and washers complete

Minimum Weight of GI Pipe: 7.3 Kgs (material rate) ESCOM SR 2025-26 Item code...

Earthing GI Grounding pipe, B - Class, 42 mm dia, 2.5 M long, 3.2 mm thick with bolts nuts, GI Strips and washers complete

Minimum Weight of GI Pipe: 7.3 Kgs (labour rate) ESCOM SR 2025-26 Item code 2...

Digging of Pit for providing GI Pipe type Earthing 1.6.1) Ordinary Soil Page no. 190 item no. 1.6.1 ESCOM SR 2025-26

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe . mm dia.mm

thick confirming to IS 2509 with suitable size bends, metal/PVC

Junction boxes, adhesive paste etc., and running...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit

/casing capping casing capping using 2x1.5Sqmm (Phase &

Neutral) & 1x1.0 sqmm (E...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit

/casing capping casing capping using 2x1.5Sqmm (Phase &

Neutral) & 1x1.0 sqmm (E...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit

/casing capping casing capping using 2x1.5Sqmm (Phase &

Neutral) & 1x1.0 sqmm (E...

Wiring for lighting/power circuit using one of FRLS PVC insulated

1100V grade, multistrand copper wire with low conductor resistance

single core in open or concealed system of wiring with specif...

Wiring for lighting/power circuit using one of FRLS PVC insulated

1100V grade, multistrand copper wire with low conductor resistance

single core in open or concealed system of wiring with specif...

Metal modular box:

Supplying and flush mounting powder coated / galvanized metal

box suitable for mounting modular switch plates. The box should be

firmly flush mounted after due groove cutting in Bri...

Metal modular box:

Supplying and flush mounting powder coated / galvanized metal

box suitable for mounting modular switch plates. The box should be

firmly flush mounted after due groove cutting in Bri...

Metal modular box:

Supplying and flush mounting powder coated / galvanized metal

box suitable for mounting modular switch plates. The box should be

firmly flush mounted after due groove cutting in Bri...

modular Switch Plate

Supplying and fixing superior quality modular switch mounting

polycarbonate plate with necessary supporting back plate with

required nos. of machine screws, bolts nuts etc., compl...

modular Switch Plate

Supplying and fixing superior quality modular switch mounting

polycarbonate plate with necessary supporting back plate with

required nos. of machine screws, bolts nuts etc., compl...

modular Switch Plate

Supplying and fixing superior quality modular switch mounting

polycarbonate plate with necessary supporting back plate with

required nos. of machine screws, bolts nuts etc., compl...

Supplying and fixing of modular switch & connected accessories on

existing modular switch plate as per IS 3854 and IS 1293. 3.6.1)6Amps one way.

PWD Ele SR 2023-24 Page No.8 Item code ...

Supplying and fixing of modular switch & connected accessories on

existing modular switch plate as per IS 3854 and IS 1293. 3.6.3) 6A Three Way socket PWD Ele SR 2023-24 Page No.8 Item ...

Stepped Fan Regulator.

Supplying and fixing of modular switch & connected accessories on

existing modular switch plate as per IS 3854 and IS 1293. 3.6.4 )Stepped Fan Regulator.

PWD Ele SR 2023-24 Pag...

Supplying and fixing of modular switch & connected accessories on

existing modular switch plate as per IS 3854 and IS 1293. 3.6.9 )32A DP Switch

PWD Ele SR 2023-24 Page No.8 Item code 3.6....

Supplying And fixing/replacing of 6/16/32A electrical

accessories on existing switch board. 3.14.7) 6A Batten Holder

PWD Ele SR 2023-24 Page No.9 Item code 3.6.4

LED Tube Fitting

Supplying of .feet -PVC Batten with integrated LED tube . W

with high quality diffuser with Life of 25000 burning hours &

70% lumen maintenance with CRI 80. Power Input: 220-

LED floodligh Fitting

Supply of LED floodlight luminaire with pressure die cast aluminium

housing body for optimal thermal dissipation. Lamp compartment

comprising of anti glare clear diffuser with In...

LED Fitting fixing Charges

Fixing all types and all capacities of fluorescent /false ceiling / spot

light / CFL / LED fittings indoor on the wall/ ceiling / rafters /

girders using 23/0.0076" twin twi...

Supplying capacitor type ceiling fan complete with down rod blades,

shackle, canopies etc, for operation on 230 V, 50 cycles. Single

phase AC supply conforming to ISS-374- 1979 and with dou...

Fan Fixing Charges Fixing a ceiling /wall mounting fan of all capacities and all types,

with necessary clamps and 'S' hook made out of 15mm dia MS rod,

with 5 A. ceiling rose of approved quality with ...

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with

bracket blades complete for light duty suitable to operate on 230V

50Hz, AC Supply.

PWD Ele SR 2023-24 Page No.55 Item code ...

Exhaust Fan Fixing Charges Fixing one exhaust fan after making a suitable notch in the wall

and finishing with cement mortar and colouring to match the

existing wall or brackets, with bolts and nuts a...

Supplying & fixing of Porcelain fuse channel with cut out on

existing wooden/panel using necessary nuts, bolts and washers. 5.7.2) 32 A

PWD Ele SR 2023-24 Page No.13 Item code 5.7.2

MS Box Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equi...

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. PWD SR 2023-24 Page No. 9 II...

Supplying & fixing miniature circuit breakers on existing MCB

distribution boards using necessary fixing materials and 'C' Type

curve, indicator ON/OFF, energy cross-3 with Short circuit...

PVC Pipe Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab....

Supplying & fixing of retrofit type - LED bulb . W with OPAL

acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance...