91 H(F)(W)/2023-24

Amount

Part - A ( Material) Following Material Supplied by the Contractor:-

G.I. Pipe 6'' dia

Battery Set 24 Volt

Battery Charger 24 Volt

Copper L Piece for 250 KVA Transformer

Holding Clamp with DIFFERENT SIZE

Holding Clamp withNut and Bolt

Tainless unit

LT Clamp with Nut & Bolt

Nut & Bolt

Carriage including loading,unloading & Proper stacking of following Stock materials from store/departmental store to Dump site distance 0 to 20 Kms. (distance approx)

PCC Pole 8.5 Mtr. long

S.T. Pole 11 Mtr. long

11 KV XLPE Cable 3x120 sqmm

11 KV XLPE Cable 3x185 sqmm

11 KV Cable Jointing Kit O/D 3x120 sqmm

11 KV Cable Jointing Kit O/D 3x185 sqmm

11 KV Cable Jointing Kit I/D 3x185 sqmm

11 KV Cable Jointing Kit Staight Through 3x185 sqmm

11 KV Cable Jointing Kit O/D 3x300 sqmm

11 KV Cable Jointing Kit I/D 3x300 sqmm

L.T. XLPE Cable 1x240 sqmm

AB Cable (3x120+1x95+1x16) sqmmq

ACSR Weasel Conductor

T/F 100 KVA

11 KV VCB I/C CTR 600/300/5A, 350 MVA 24 VDC 1250A Differential Protection

11 KV VCB CTR 600/300/5A

11 VCB O/G for CTR 200/100/5A

Distribution Box Three Phase

Other matching Materials

Dragging of ST/PCC Pole from dump site to pit site

Fabrication and Errection of Single Pole Support on ST/PCC Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Fabrication and Errection of Double Pole Support on ST/PCC Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Stringing, Sagging, Binding and jumpering of ACSR Weasel Conductor as per RESSPO Norms

Stringing, Sagging, Binding and jumpering of AB Cable (3x120+1x95+1x16) sqmmq Conductor as per RESSPO Norms

Grouting and Binding of Stay with in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Earthing of Poles as per RESPO Norms

Mounting of 100 KVA Transformer as per RESSPO Norms.

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Laying of underground 11 KV 3x185 sq mm XLPE Cable in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Road Crossing Charge (All the material will be supplied by the contractor except 11 KV XLPE cable)

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPE cable 3x185/120 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Indoor end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPE cable 3x300 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Indoor end Termination suitable for 11 KV XLPE cable 3x300 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of 11 KV VCB I/C CTR 600/300/5A, 350 MVA 24 VDC 1250A Differential Protection

Installation of 11 KV VCB CTR 600/300/5A

Installation of 11 kV VCB O/G for CTR 200/100/5A

Erection & Commissioning of of 3 Phase/Single Phase Distribution Box with help of clamps (Cost of clamp & Bolt & Nuts shall be borne by contactor ) as per Norms.

Connection of L.T. XLPE Cable Different Size & Different Places

M/s Shukla Enterprises

M/S SATYAM TRADING COMPANY