81101/E8 UNDER GE WEST JABALPUR

Amount

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris to out side MD land complete all as specified & directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles, laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified & directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles, laid over and including 10 mm thick rendering in cement mortar (1:4), complete all as specified and directed.

M & L Non Skid ceramic Coloured joint free tiles 7 to 8 mm thick ( square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles, laid over and including 15 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic tiles colour 350x250x7mm / 450x350x7mm thick in vertical surfaces such as skirting, dado and risers to steps, set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles, laid over and including 10mm thick cement mortar (1:4) on fair faces of brick work or concrete surfaces as backing for tiles complete all as specified and directed.

Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in two layer (first layer 10 mm in CM (1:6) and second layer 5 mm in CM(1:4) mixed with liquid water proofing compound, finished even and smooth without using extra cement complete all as specified & directed. (Note :- Liquid Water proofing compound shall be measured & paid for seperately as "Supply only" against relevant item of this BoQ.)

Supply only liquid water proofing compound ISI Marked, of make as approved by GE complete all as specified & directed.

M & L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM(1:6), finished even and fair without using extra cement complete all as specified and directed

M&L for preparing new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed

M&L for preparation of old plastered surfaces of ceilings and apply two coat of white wash complete all as specified and directed.

M & L for rendering 5 mm thick in C:M(1:3) on chajja,Ceiling in patches and finishes and smooth complete all as specified and directed

Complete Removal of existing treatment of old wall surfaces complete all as specified and directed

M & L applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified.

Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed.

Ditto all as per Srl item above but except brick.

Taking down steel tubing and connections including cleaning for refixing or removal from site for 15mm bore pipe complete all as specified and directed by Engr-in-charge.

Taking down steel tubing and connections including cleaning for refixing or removal from site for 20mm bore pipe all as specified and directed by Engr-in-charge.

Supply & laying of CPVC pipes 16 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors ,complete all as specified and directed

Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed

S&F in Repair 15 mm bore Brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed with complete accessories complete all as specified and directed .

S&F in Repair 15 mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed with complete accessories complete all as specified and directed .

M & L for cutting chases, pinning in brick walls/ stone concrete block or slab walls , making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings , steps, cills, sunshades, shelves, lintels etc; and cutting chases for concealed water tubing or cocealed conduit wiring, etc and making good , cutting not exceed 10 cm girth complete all as specified and as directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, head, shoes, bends, swan-necks atc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified & directed

S&F, PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified & directed

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S & F PVC (SWR) bends any radius, 75 mm bore, complete all as specified and directed.

PVC (SWR) 110mm bore 'T' equal or unequal complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe with access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe with access door complete all as specified and directed.

S & F PVC (SWR) branch piece 110mm bore, single (single Y) equal or unequal complete all as specified & directed

PVC (SWR) floor trap / Nahani trap with grating 75 mm dia incl jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) vent cowl for 110 mm bore pipe complete all as specified & directed

S & F in repair sinks with drainage board made of stainless steel 1 mm thick with plugs, washer, wastes , brackets etc, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified & directed

S & F Stain less steel small size plate rack including fixing depth not less than 25 cm and thickness not lessthan 1mm complete all as specified and as directed

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.50 sqm each and removal complete all as specified & directed.

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but n.exc 4 sqm each and removal complete all as specified & directed.

Taking down Shutter exc. 1 sqm and not exc. 2 sqm each of door, cupboard etc complete all as specified and directed.

Taking down Shutter exc. 2 sqm each of door, cupboard etc complete all as specified and directed.

M&L for providing PCC 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary formwork etc. complete all as specified and directed.

M&L for pressed steel door frame size 125 mm x 60 mm and 1.25 mm thick including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed.

M&L for pressed steel door frame size 105 mm x 60 mm and 1.25 mm thick including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed.

M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed. Notes:- (i) glazing will be measured and paid for separately. (ii) Butt hinge will be measured and paid for separately .

M&L for factory made 35mm thick second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, framed, panelled shutter (two or three panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stiles as per IS: 1003 (Part-I), kiln seasoned complete all as specified & directed.

Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F, Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100 mm long aluminium alloy type C-22 butt hinges with galvanised ms hinge pin etc. complete all as specified & directed.

S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified & directed.

S&F 150mm long aluminium anodised handle cast type and fixed complete all as specified & directed.

S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250 mm length of bolt complete all as specified and directed.

S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 300 mm length of bolt complete all as specified and directed.

S & F Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 150mm long complete all as specified & directed.

S&F framed work such as grills, gratings and holdfasts etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conforming to Fe- 290(Gde-E-165) complete all as specified & directed.

S & F powder coated (min thickness of powder coating 50 micron) Aluminium door, window,ventilator frame with one or more rebates and shutter incl jointing cleat for fixing etc. including making good to the disturbed surfaces and matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etc complete all as specified and directed

S & F powder coated (min thickness of powder coating 50 micron) Aluminium door, window,ventilator shutter slinding type without sach bar aluminium section weighting 0.55 kg/m including necessary jointing cleat glazing clip rubber packing anodised aluminium snaps beading screw anodised aluminium fittings such as per stay 150 mm long hinges type B-22 100 mm long 2 Nos suitable handle including making good to disturebed surface complete all as specified and directed

S&F 3 mm thick sheet glass ordinary quality and galzing with necessory rubber beading of any size complete as in aluminium windows/ventilators all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and galzing with necessory rubber beading of any size complete as in aluminium windows/ventilators all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-charge.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F in repair 18-20 mm thick Acrylic Pvc Celuka Board,prelaminated one side with decorative choice lamination & other side balancing white lamination approved texture ("Celluka PVC ply of Rajshree make or equivalent in "sintex" as approved by GE) as in kitchen cabinet,Cupboard etc ( with shelves and partition ) including necessary fittings & fixtures as per manufacture's instrucions complete all as specified and directed by Engr-in-charge

S&F continious(Piano) hinges, mild steel,bright finish or electro galanised, width of flap 30mm when open.complete all as specified and directed

S&F 150 mm size brass handles, cast type, polished bright complete all as specified and directed.

S&F magnetic stopper suitable for cupboard, dressing table fixed with screws complete all as specified and directed.

M & L for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished,complete all as specified and directed

M&L two coat of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces compelte.

M&L two coat of synthetic enamel paint over new steel surface of any description over 10cm in width or grith not otherwise described over one coat red oxide primer including preparation of surfaces complete.

M & L preparation of Old steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint complete all as specified and as directed.

M & L preparation of Old wooden surfaces of any description over 10 cm width or girth & applying two coat of synthetic enamel paint complete all as specified and as directed.

M&L for 40 mm bore low density polythelene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and directed.

S&F in repair Stainless steel conduit curtain rod with PVC coating fancy type curten rod 20 mm dia of any colour including end globe as approved complete including side mounting.

S&F Stainless steel Bracket with PVC coating fancy type for curten rod 20 mm dia of any colour as approved complete.

S&F in repair Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed by Engr-in-charge.

S & Fin repair for Bib taps, cast copper alloy with butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, 15 mm, fancy type, chromium plated fixed complete.

S & Fin repair for Stop valves, cast copper alloy, screwed down, high pre-ssure, with butterfly handle, screwed both ends for iron pipe or for unions and fixed , 15 mm fixed complete.

S & F in repair for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed , 20 mm fixed complete.

S & F in repair for Grating doom 100 mm dia of chromium plated (Minimum weight 25gms) fixed complete.

S & F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 300gms) fixed complete.

S & F in repair for Soap dish, any type, fixed to plugs with chromium plated brass screws fixed complete all as specified and directed.

S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified & directed.

S & F for PVC connections 15 mm size with PTMT nuts of length 600mm fixed complete all as specified & directed.

S & F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) fixed in repairs complete all as specified & directed.

Vitreous china WHB 550x400mm on exsting brackets , fixing flat back or an le back type with PVC (hdpe) 32 mm dia waste pipe, brass coupling 32 mm CP etc fixed in repair complete all as specified and directed.

S&F PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-charge.

M&L Granite (of any type ) slab/tiles as cooking platform/shelf,window cill,jam 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and cutting of holes for gas pipe complete

M&L Cudappah stone slab on cooking platform/shelf 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match over and including 20mm thick screed bed in CM 1:6, the shade of the slab including rubbing and polishing and cutting of holes for gas pipe complete all as specified & directed.

M&L preparation of New or old plastered wall surfaces and applying 2 mm thick wall care putty to get smooth and even surfaces of wall including Priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

M & L for 1st coat of oil bound distemper complete all as specified and as directed by Engineer-in-charge.

M & L for subsequent coats of oil bound distemper complete all as specified and as directed by Engineer-in-charge.

M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new or old surfaces, height upto 15 mtrs complete all as specified and directed by Engr-in-charge.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

M & L for preparing surfaces of sunken floor by brooming down or steel wire brushing and cleaning the surface with water and applying a coat of Rendercok HBF water proofing coating as per manufacturer's instructions over slab and sides of sunken slab complete all as required and as directed by Engineer - in - Charge at site.

Removing old tar felt, all loose dirt,old roof tiles,including taking down cement plaster cleaning the concrete surface including removal & cleaning of vegetation, fungus,moss small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work and applying neat cement slurry @ 1.5Kg/Sqm complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in CM 1:4 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed. (Note- Liquid WPC will be measurd and paid for separately as "Supply Only")

Applying evenly a coat of blown type bitumen at the rate of 0.30 kg per square metre complete all as specified & directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gm/sqm) land on primed surface by forced application complete all as specified & directed.

Applying two coats of bituminous aluminium paint on top of membrane @ 0.20Kg/Sqm complete all as specified & directed.

Cement concrete tiles size 25cmx25cmx22mm thick machine cut pressed set jointed and pointed in neat cement slurry with grey cement and pigments fixed in floors, laid over & including 15 mm thick scred bed in CM(1:6) and cut and polished complete all as specified and directed

S & F Hasp and Staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws 75 mm size complete all as specified & directed.

M & L Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 10mm thick rendering in cement mortar (1:4) , on fair faces of brick work or concrete surfaces as backing complete all as specified & directed.

M&L for Machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 sqm), laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab, laid over and including 20 mm thick bedding layer in cement mortar(1 :4) including rubbing and mirror polishing complete all as specified and directed.

M&L 18 to 20 mm thick Machine cut kota stone as in vertical surfaces rised of steps , skirting, dado and pillar etc set and jointed in neat cement slury and pointed with grey cement mixed with pigment to match the colour of stone slab laid over and including 10 mm thick rendering in cement mortar 1 :4 including rubber and mirror polishing complete all as specified.

M & L for Providing and injecting chemical emulsion for Post Constructional Anti Termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq. M of the vertical surface of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc., complete all as specified & directed.

M&L 75 mm thick as in sub base in (1:4:8) type D2(using 40 mm graded stone aggregate) complete all as specified & directed.

M&L 100 mm thick as in sub base in ( 1:4:8) type D2(using 40 mm graded stone aggregate) complete all as specified & directed.

M & L providing, cement concrete (1:2:4), type B1 ( using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified & directed.

M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified & directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, conforming to IS 15658-2006 of 60 mm thickness M 35 Grade laid over and including 50mm thick M-sand cushioning complete all as specified and as directed.

Dismantling of water tank of any description of capacity exc. 500 litres but not exc. 1000 litres, removing to store or from the site complete all as specified and as directed.

Supply and fix 500 ltrs capacity rotational moulded polyethylene water storage tank double layered,ISI Marked, (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

Supply and fix 1000 ltrs capacity rotational moulded polyethylene water storage tank double layered,ISI Marked, (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cm in thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.

M&L 25 mm thick PCC 1:2:4, type B-1(20 mm graded crushed stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed by Engr in charge.

M & L roughting of surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust complete all as specified and directed .

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in in cement mortar 1:4 and finished even and smooth without using extra cement. including mixing of water proofing compound. Note :- Liquid Water proofing compound shall be measured and paid for separately as "Supply only".

M & L for preparing newly plastered surfaces of external walls and applying two coats of cement based paint Alkail & fungal resistance , dirt resestence exterior paint of requires shed (company depot Tinted) with encluding priming coat of exteriror primer applied complete all as specified and directed.

M & L for complete removal of existing treatment and washing rubbing down and stopping of distempered and painted surfaces incl preparation of old undecorated surfaces of external walls and applying two coats of cement based paint of wall over printing surfaces plete all as specified and directed.

M&L for preparation of newly plastered surfaces of internal walls and apply two coat of oil bond insulation, Alkali & fungal registance dirt resistance interior paint, of required shed (completely Depot Tinted) over and including priming coats of interior primer applied over and including 2 mm thick wall care putty complete all as specified and directed.

M & for removal of existing treatment and washing rubbing down and stoping of distempered and painted surfaces including preparation of old undecorated surface of walls and applying two coats of oil bound emulsion on wall over priming surface with and including 2 mm thick wall care putty complete all as specified and directed.

M & for preparing complete removal of existing treatment and washing rubbing down and stoping of distempered and painted surfaces incl preparation of old undecorated surface of walls and applying two coats of oil bound emulsion on wall cover priming surface complete all as specified and directed.

M & for preparing new plastered surfaces of ceiling and applying two coats of oil bound emulsion Alkail & fungal registance dirt resistence interior paint shed of required shed (completely Depot Tinted) over and including priming coats of interior primer applied 2 mm thick wall putty complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing or removal from site 15 mm bore of pipe complete all as specified and directed.

S&F repair cromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes surface for 15 mm bore pipe complete all as specified and directed.

S & F in repair providing and fixing in repair CP brass wall mixer with provision for over head shower with 11.5 mm long bend pipe or upper side connecting legs and wall flanges etc complete all as per direction Engr-in-Charge (Note : contractor shall provide 10 year warranty certificate and manufacturers test certificate including copy of invoice of each items.

S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed

S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed

S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed etc.

Supply and fix aluminium (power coated(minimum thickness of powder coating 50 micron)) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.00 mm x 31.75 mm x 1.50 mm thick and shutter frames of size 40 mm x 18 mmx 1.55 mm thick whith necessary joining cleats, glazing clips, rubber gasket anodised aluminium slap beading and connected locking arrangement complete all as per manufacturers catalogue and specification complete all as specified and directed. Note (i) Glass filling in panels of windows and aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm fixed with aluminium wire staple (ii) Glass filling in panels of gauzed shutter shall be 4.00 mm thick tinted sheet glass of approved make and shade/tint.

S & F in repair 18 mm pre-laminated colour solid PVC sheet suitably fixed in MS angle frame work complete fixed to wall as in cup board, Cabinet Drawer etc as per manufacturer's specification and drawing complete all as specified and directed.

S&F brass handles, cast type, polished bright of 150 mm size complete all as specified and directed.

S & F in repair providing and fixing CP brass over head shower dia 105 mm with 15 mm CP brass shower arm casted 190 mm long flate shape for wall mounted shower with flamge etc complete all as specified and directed. (Note : Contractor shall provide 10 year Warranty certificate ).

S & F door seal rubber etc (as approved by GE)complete all as specified and directed.

S&F in repair PVC cabinet (size 400 x 500) with mirror etc complete all as specified

Providing and applying two coats of brushbond acrylic polymer modified cementatious waterproof coating after carrying out proper surface preparation including removing loose concrete, foreign materials, cleaning of concrete surface etc, pre dampening of concrete surface mixing all components of Brush bond using heavy duty slow speed drill fitted with mixing paddle flowed by application of two coats using a suitable brush as per manufacturer instructions complete all as specified and directed.

Form work to sides and soffits of floor or roof beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves, for flat rough finished concrete surfaces complete all as specified and directed.

Form work to chullah hood, chajjas, troughs and similar items including edges etc for rough finished flat concrete surface complete all as specified and directed.

M&L for RCC (nominal mix) (1:2:4) type B1 using 20 mm graded stone aggregate as in beam, cantilevers, bressummers, lintels over 1.5 m span and similar work complete all as specified and directed.

M&L for RCC (nominal mix) 1:2:4 type B1 using 20 mm graded stone aggregate as in chajjas and similar work complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 8 mm dia as in stirrups, spacers and binders for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick Dark shade (square / rectangular) polished area of each tile not exceeding 0.36 sqm including 15 mm thick screed bed or bedding layer in CM 1:6 surface finished fair and even for laying floor finishes complete all as specified and directed.

All as per above item but in skirting with rendering 10 mm thick CM 1:4 complete all as specified and directed

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall and finished even and fair complete all as specified and directed.

S&F for 15mm bore dia of pipe pillar taps cast copper alloy, with capstan head chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

M & L for 75 mm dia PTMT floor trap plain with grating including jointing with solvent cement complete all as specified and as directed

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 150 mm complete all as specified and directed.

S&F, Factory Made single piece extruded solid PVC door frame prelame frame single rebate made out of single piece extruded spe solid PVC foam profile with smooth outer integral skin having odd size 90 mm x 47 mm PVC profile througoul reinforcement with MS tube with PVC sheet as per manufacturer instruction specification and direction of Engineer in charge.

S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed

S & F in repair sheet glass shelf assembly consisting of 5.50 mm thick sheet glass 12 cm wide with chromium plated bracket guards any railing 60 mm long complete all as specified and directed.

M&L Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern and flush pipe complete all as specified and directed.

S & F in repair WC plastic seat white/black closed pattern with flat bottom and cover mild steel chromium plated or aluminised hinging device all as specified and directed.

M&L for vitreous china wash hand basin, white,flat back, size 550 x 400 mmincluding existing bracket fixing flat back or angle back type with PVC HDPE pipe 32 mm dia waste pipe, brass coupling mild steel breacket fixed to wall with pedestal complete all as specified and directed.

M & L complete removal of existing treatment on wall including steel wire brushing and scrapping etc and applying 2 mm thick biria wall care putty surface including rubber leveling and preparing the surface for receiving further finishes as directed.

M&L for preparation of old decorated surfaces of ceiling by brooming or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and apply one coat of white wash complete all as specified and directed

M&L for applying two coat of distemper oil emuision on new putty surface of complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coat of distemper oil emulsion white or tinted on wall complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coat of cement based paint white or tinted on wall complete all as specified and directed.

M & L for two coats of cement based paint on new plastered surface of walls over a coat of appropriate primer including preparation of surface complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement laid in base with construction 6 mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand (all by weight) complete

Dismantling of AC corrugated / semi corrugated sheet as in roof coverings complete all as specified and directed.

Dismantling of plain/ corrugated / semi corrugated steel sheet of any gauge as in roof coverings complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based 0.50mm thick(AZ-150)corrugated steel sheet of any colour having minimum tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ L or J type or cranked hook/ bolts as complete all as specified & directed.

S&F of pre-painted galvalume aluminium zinc coating GI based 0.50mm thick(AZ-150) plain steel sheet of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip and straight flashings (length & girth as fixed) fixed with self tapping screws complete all as specified & directed.

Dismantling timber scantlings 40 sqcm and over in section as in unframed work in any position complete all as specified and directed..

S&F rolled mild steel section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connected plates of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed

Demolition of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs/ blankets any thickness including cover fillets complete all as specified and directed.

S & F 4mm non asbestos fiber cement building boards fixed or laid inserted to timber /gi/aluminium frame work and fixed in ceiling flat or sloping as in repaoir ge frame of 20 & 30 mm and web 27 mm fixed to surrounding wall using nylon sleevs and screw at 450 mm c/c intermidiate channel 0.9 mm thick having equal flanges of 15 mm each and web 45 mm fixed to surrounding from soffit at aprox 900 mm c/c with gi cleat and steel expension fastener with and including ceiling section n exc 1.2 m length of 0.55 mm thickness having kuled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermidiat channel at 457 mm c/c with hanger of 4 mm dia gi upto 1200 mm adjusting level fixed to roof slabs by means of ceiling cleats made of gi flats 40 x 3 mm size 60 mm long and expansion holdfast 12.5 mm, 40 mm long repair complete all as specied and directed.

Taking down carefully any type point wiring (light, fan, socket bell or power), complete with fitting such as switches ceiling roses lamp holder sockets regulators, call bell light fitting with PVC conduit surface/concealed or wooden pattens including sunkencast iron/pressed steel teminjkal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces all as specified and directed by Engr-in-Charge.

Taking down carefully Maint switch and Distribution boards any make and size.

Taking down the ceiling fan/exhaust fan in situ and depositing it in MES. Complete all as specified and directed.

Taking down care fully old unserviceable any type submain wiring with wooden batten/PVC surface conduit of any size and making good the disturbed surfaces of walls, roof etc to match with the existing surfaces complete all as specified and directed.

M & L for submain wiring two single core PVC insulated cable of size 6.0 sqmm multistranded copper conductor two run drawing into and including concealed rigid non metalic PVC conduit, medium grade not less than 25 mm dia with all conduit fitting, fixing accessories and one run of 6.0 sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engr-in-Charge. Note : Two Nos of 6.00 sqmm wire and One No of 4.00 sqmm earth wire in one RM length measured as one unit length.

M & L for submain wiring two single core PVC insulated cable of size 4.00 sqmm multistranded copper conductor drawing into and including concealed rigid non metallic PVC conduit, medium grade not less than 20 mm dia with all conduit fitting, fixing accessories and 4.00 sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engr-in-Charge. Note : Two Nos of 4.00 sqmm wire and One No of 4.00 sqmm earth wire in one RM length measured as one unit length.

M & L for point wiring with PVC insulated 1.5 sqmm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduct not less than 20 mm (IS marked) including all fittin and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrosivepaint outside and two coats of aluminium paint inside, 2.8 mm thick hylam brand laminated white bakelitesheet cover for mounting of switches, sockets fan regulators etc and PVC insulated 1.5 sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engr-in-Charge.

One light point/Bell point controlled by one switch

One fan point controlled by one switch

One socket point controlled by one switch on same board

One socket point controlled by one switch on independent board

Description all as per item No 181 here in befor but with 1100 volts grade copper standard conductor cable of size 2.5 sqmm with 2.5 sqmm solid copper conductor PVC for 3 pin switch socket outlet 15 amp independent board complete all as specified and directed by Engr-in-Charge.

S & F in repairfor bell ding dong AC 230 volts, single pole one way complete all as specified and directed by Engr-in-Charge.

S & F in repair for switch piano flush type AC 230 volts, 5 Amps single pole one way complete all as specified and directed by Engr-in-Charge.

S & F in repair for socket outlet 3 pin 5 Amps and AC 230 volts, 5 flush type complete all as specified and directed by Engr-in-Charge.

S & F in repair for switch Socket combination 3 pin 5 & 15/16 Amps and AC 230 volts, flush type complete all as specified and directed by Engr-in-Charge.

S & F in repair for socket outlet 2 in 1, 5 pin 5 Amps 230 volts, complete all as specified and directed by Engr-in-Charge. Make :- anchor or equivalent , plaza, leader.

S & F in repair for ceiling rose surface bakelite 65 mm x 50 mm three terminal AC 230 volts, flush type complete all as specified and directed by Engr-in-Charge.

S & F in repair for regulator step type of polycarbonate complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair of LED lamp rotary type/holder type of 9 watt all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of round shape 12 watt 220 volts AC wall type with high efficiency PMMA difuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting with three core fixible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fixing smart bright Batten Series , LED luminaire using LED 22 watt 110 Lumens/watt with diffuser which ensure uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output, stable colour start Extruded Aluminium housing, energy efficient. Filcker free start inbuilt drive unit suitable for wall and ceiling mounting using brackets with and including the luminaries testing on completion as per specification IEC 60598-2-1/IS: 10322(parts/Secl).

S & F, in repair of LED decorative/ mirror light fitting 10 watt alongwith fixture surfaces mounted suitable for indoor application, connector block etc complete with all accessories intemally pre-wired and including round wood block, connecting up with three core, flexible, flexible copper conductor cable suitable size complete all as specified and directed.

S & F, in repair Bulk head endura LED light fitting complete with 10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size complete all as specified and directed.

Supply and fix in repair of LED Security Light Luminaire 35 watt, 6000K with high power LED cool white, CRI 75 +/- 5 % supply voltage 220/240/50Hz lightengine driver base pole adapter power coated pressure dia cast aluminium with heat resistant loughened glass with lens type GI pipe 40 mm dia medium grade not less than with 1.2 m long in any shape with 2 Nos of pole fitting clamps made out of MS flat, nuts and bolts and painting with aluminium paint complete all as specified and directed.

S & F, in repair sheet metal enclosure DBs Tripple pole and Neutral 4-way with 200 Amps rated bus bar 415 volts single pole and neutral complete double door complete all as specified and directed by Engr-in-Charge.

S & F, in repair MCB TPN 415 volts 63 Amps C series complete all as specified and directed by Engr-in-Charge.

S & F MCB TP 25 to 63 Amps, 240 Volts, minimum 10 KA ‘C’ series ruptuning capacity and to be housed in DBs catered here in before complete all as specified & directed (Make : Legrand /L & T/Havells) (Note :- proper and suitable size cable copper lugs to be fixed with MCBs are included in unit rate of each MCB of any rating.

Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30 watt rated current 0.16 amp,pf 0.98 370/360 rpm air delivery 220m3 rated service value 629 m 3/min/ watt no of blades three type of blade leaf 1.05 mm thick aluminium sheet remote control radio frequency 5 sp0eed + off timer option speed regulation classof instruction two nos bearings including connecting wire complete with all as required and directed at site by eng in charge Make : Havells/ CG/ Bajaj

S & F, in repair sheet metal enclosure DBs Single pole and Neutral 8-way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed by Engr-in-Charge.

Supply & Fixing, in repair MCB single pole and nature 240 volts 40 Amps B series complete all as specified and directed by Engr-in-Charge.

Supply & Fixing, in repair MCB/Isolator single pole 240 volts upto 40 Amps B series complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair modular AC box (earth plug socket) complete with 01 number single pole MCB 20 Amps complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

S & F, in repair for bell push piano flush type AC 230 volts5 Amps single pole one way complete all as specified and directed by Engr-in-Charge.

Supply and fixing single phase propeller type ventilating (exhaust fan) heavy duty AC 230 volts 300 mm sweep, metalic body complete with louvers including making holes for suitable size and making good the disturbed surface and shutters including electric connection with PVC flexible twin core copper wire from ceiling rose to Exhaust fan, nut and bolt complete all as specified and directed

Supply and fixing single phase propeller type ventilating (exhaust fan) heavy duty AC 230 volts 300 mm sweep, engineering plastic body complete with louvers including making holes for suitable size and making good the disturbed surface and shutters including electric connection with PVC flexible twin core copper wire from ceiling rose to Exhaust fan, nut and bolt complete all as specified and directed

Supply and fix Geyser 25 ltr with fitting arrangements all as per required and directed.

Taking down old metel any type, disconnecting all connections and refixing it after all finishing of wall surface and works all as per required and directed by Engr-in-Charge.

M & L for fan regulator socket type AC 230 volts complete all as specified and directed by Engr-in-Charge.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 25 sqmm, 4 core including jointing materials such as cable glands & lugs etc Complete all as directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.

M & L for rendering, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed

M & L for removing excavated material n exc 50 m and depositingwhere directed at a level n exc 1.5 m above the starting point complete all as specified and directed

Supply , laying and fixing double wall corrugated (DWC) pipes of size 50 mm outer dia and 38 mm inner dia made of high density polythethyline (HDPE) with all accessories i.e. all type of joint sockets, Elbow bends and end caps etc with all as required and specified as directed.

Supply and spreading clean and dry fine sand free from sharp materials (unwashed) laying in trenches around the cable for cushioning in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed. ( Note : Punned thickness shall be considered for payment purpose)

Supply and laying Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class ‘B’ bricks laid dry flat complete all as specified and directed.

Taking down carefully ceiling fan/Exhaust Fan of any sweep and size and depositing to MES store and Hanging only ceiling fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan

Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed.

S & F Sheet metal enclosure DBs Single Pole and Neutral 12 way with 200 Amps rated bus bar 240 volts complete double door complete all as specified and directed.

S & F MCB single pole and neutral 240 volts 40 Amps, B Series complete all as specified and directed.

S & F MCB single pole 240 volts 6 to 40 Amps, B Series complete all as specified and directed.

S&F in replacement of sheet steel enclouser distribution boards, double door factory made VTPN 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB 100 amps and MCB TP 63 A -02 Nos,MCB SP -04 Nos circuits comprising of 3 phase 4 wire of suitable rating all as specified and directed.

Taking down cable any size all as per required and directed by Engr In charge

Taking down LT panel any type and size including disconnecting the exhisting cable and all accessories complete as directed and removal from site all as per required.

Taking down DWC pipe any size all as per required and directed.

Supply , laying and testsilng cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables Heavy duty 1100 volts grade with stranded aluminium conductor of size 3.5 core 50 Sqmm complete all as specified and directed.

M&L for GI Tubes,of size 40 mm dia light grade, galvanised, with all fitting , laid in trenches for protection of cable in road /drain crossing complete all as specified and as directed.

Supply, installation, commissioning and testing indoor wall mounting LT Panel Board of minimum size 1.50 m (height) x 1.20 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four comparment for fixing of four nos Three phase KWH meter, one No. single phase meter and MCB TPN and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with maintained the colour code and copper strip/wire busbar of suitable size to MCCB input and MCCB /MCB output of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 10 Sqmm copper wire and connections of all outgoing / incomming existing cable of any size and removing existing unsv one complete all as directed by Engineer-in-Charge. (For Officers Accn)

OUTGOING (a) MCB, Tripple pole & neutral, 63 amps, 415 volts, 'C' curve, 10 KA - 3 Nos (b) MCB, single pole & neutral, 20 amps, 240 volts, 'C' curve, 10 KA - 03 No. (d) Smart Three Phase Meter AC three phase four wire, tamper proof, static meter of class 1.0, 415Volts, 50 Hz of capacity 10 Amps-60 Amps conforming to IS-16444 and relevant IEC standards with in built 865-867 MHz radio frequency communication facility with self healing mesh netork with default and on demand display, billing data generation facility, antitemper features, microprocessor and LED/LCD based circuitry. Meter should support the follwing data: 30 min instantanous data for voltage, current, power factor, power cumulative energy and frequency, 30 load survey data for energy, monthly billing survey for cumulative energy and max demand. Meter should have connnect/disconnect funtionality operable compactable system from prepaid billing software in future. The meter should support open communication protocol DLMS with the software. 02 Nos.

Supply and fixing in replacement of decorative wall/ceiling light WITH LAMP 9 WATT made up of polycarbonate, city-1, Cylinder shape, with LED lamp 9 watt complete with fixing arrangement on wall all as specified and directed.

Supply fixing connecting and testing LED bollard light/post top lantern decorative type and reflector 8-9 watt etc complete all as specified and directed .

S & F in replacement of LED light fitting square 57 X57 cm not less than 36 watt alongwith fixture Recessed mounting LED luminaries with diffuser channel luminaries ers, connector block etc. Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible, flexible copper conductor cable suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fixing integral post top lanterns complete with black ABC plastic spigot, spun aluminum funnel shape with clear acrylic cover light opening on canopy with baffles and accessories with 15 watt LED lamp, GI pipe as required to fix in gat5e pillar complete all as specified and directed.

Supply , laying and testsilng cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 2 core 10 Sqmm complete all as specified and directed .

Supply , laying and testing cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 3.5 core 35 Sqmm complete all as specified and directed by Engineer in charge.

(e) One Nos of danger notice plate of size 200 x 150 x 1.6 mm thick mild steel sheet various enameled white and leather figure and convertional skull and bones of signal red colour and fixed/inveted with pannel of suitable size (f) Copper wound with CTR 100/5-03 Nos including LT MCCB, 4 pole, 415 volts 36 KA, 250 Ampas-01 No Outgoing :- (i) LT MCCB 04 pole, 415 volts 26 KA, 160 Ampas-02 Nos (ii) LT MCCB 04 pole, 415 volts 26 KA, 125 Ampas-02 Nos (iii)Meteing equipment complete for incoming and outgoing feeders : 1 job ( Note :- (All switchgears, ACB, MCCB should be rotary handle , thermal magnetic release adjustable type. )

Schedule of credit amount of Rs 1,57,456.00 shall be deducted during AOC to arrive contract amount.

SUBHASH CHNADRA RAI (BID ID -3328939)

M/S Modern builders (BID ID -3329486)

J.P ENTERPRISES (BID ID -3329674)

RAM ASSOCIATES (BID ID -3328624)

ASHOKA ASSOCIATES (BID ID -3329224)

C L BHATIA (BID ID -3329215)