Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.2 CrAdmitted-Finance N 29 ADINATH NAGAR OPP WORLD TRADE PARK JAI JAWAN COLONY III MALVIYA NAGAR JAIPUR 302034 RAJ | JAIPUR | JAIPUR | RAJASTHAN | 302034 | ₹38.2 Cr | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S GULSHAN RAI JAIN-II L1 |
|---|---|---|---|---|
| 1.00H-SCHEDULE ITEMS | ||||
| 2.00 | SITC cf PWM IGBTs Based technology 100% capacity rectilier charger 10KVA Online UPS with battery backup lor min. 60 Minutes complete with 65 AlL 16 Nos SME battries with corrosi n lree batery cabnet/stand . loop winng with suitable apaciny copper wire complete with following specitication input voltage- 400V, 3 Phase, 4 wire, 50 Hz, battery charger m. power- 13A. rominal output voltage-220-240V. AC. 1 Phase. 50 Hz online mode efficieney upto 96.2% noise at 1 Mtr. C-60db relative inumidity (oRH)-5-959 Non condensing) UPS Make:- Vertiv (Enmerson). GE. APC (Battery Make:- Exide/Quanta) | 1 | Each | 4,90,000 ₹4.9 L |
| 3.00 | SITC cf PWM IGBTs Based technology 100% capacity rectilier charger 20 KVA Online UPS vith battery backup for min. 60 | Minutes complete KVA Online UPS vith battery backup for min. 60 | Minutes complete complete with 65 AH 32 Nos SMF battries with corrosin free battery cabinet/stand , loop wiring with suitable capacity copper wire complete vith following specification input voltage- 400V, 3 Phase, 4 wire. 50 Hz, battery charger m. power 13A. r.ominal output voltage-400/415V, AC, 3Phase, 50 Hz online mode efficiency upto 96.2% noise at 1 Mtr. C-60db relative umidity (%RH)-5-959 Non condensing) UPS Make:- Vertiv (Emerson). GE. APC (Battery Make:- Exide/Quanta) | 1 | Each | 6,40,000 ₹6.4 L |
| 4.00NOTE:- 1.The above rates are for this work specific and shall not be generalized for other works. 2. The rate received in tender be intimated to this office before approving the tender. | ||||
| 5.00Supply, installation, testing and commissioning of EPABX system consist, no. of extension, no of junction, no. of expandable eport, operating console, current on max. load with ISDN compatible of approved make and labor as required as per specifications. | ||||
| 6.00 | EPABX system consists of 64 nos. extensions, 16 nos of junction & upto 128 nos. of expandable eport, with one operating console, 3 Amp max. current | 1 | Each | 3,00,000 ₹3 L |
| 7.00 | Supply, installation, testing and commissioning of telephone instrument as approved by architect (Siemens/ Panasonic/ Tata/ BPL) | 113 | Each | 2,500 ₹2.8 L |
| 8.00 | This should be a hermetically sealed, single sliding door of 2.1 (H)X 1.8 m(W), The controller should be capable of being operated by elbow switches/foot switches as well as touch less sensor.The track should be of Aluminum and the running surface for the top rollers should be suitably angled to reduce resistance to movement. The door leaf should be hung by means of hard plastic rollers of high quality with double bearing at the top. Rollers should be provided under the Aluminium track to enable smooth and noiseless movement. Opening and closing of the door should be microprocessor controlled electromechanical movement. The door material should be of HPL Color should match the interior and care should be taken to make the leaf strong and light weight. One should be able to open and close the door effortlessly incase of failure of automatic mechanism. Door opening handle should be strong and sturdy. Material should be of SS (gloss finish). Should be provided with high quality cylindrical lock. Door leaf should have high quality synthetic rubber gasket with long life to ensure hermetic sealing (to maintain air pressure differential). Air tightness 99.99% at a pressure of 100Pa.The finished floor on either side of the door should be perfectly level (maximum permissible difference +1mm). The overall thickness of the finished door should be 60mm. The inner part of the door should be filled with CFC free polyurethane foam thickness of 52 mm nearby. (Sealed airtight to prevent further ingress of any microbial organism). The door and controls should comply with IEE regulation. SDA04 automation with battery backup PMDC motor. Door should be with vision window 300 mm x 300 mm with double glazed panels and hermetically sealed. Door movement should have minimum noise. The starting time after receiving the signal should be adjustable between 0.5 to 20 seconds. Test certificate for hermetically sealed door frame (factory test certificate) should be enclosed with the pre dispatch documents. | 6 | Each | 2,00,000 ₹12 L |
| 9.00 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium
carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 100 mm | 1,083 | Rmt | 1,000 ₹10.8 L |
| 10.00 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of equired size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick | 410 | sqm | 5,100 ₹20.9 L |
Tender Value
₹39.2 Cr
EMD Value
₹78.4 L
Closing Date
25 May 2023, 6:00 pmClosed
Executive Engineer, Medical and Health, Div. Alwar
CHMO Office, Near Nangali Circle, Alwar
Construction of Sub District Hospital at Mandawari (Lalsot), Distt. Dausa (Including internal Electrification work) (State Head)
2023_MEDIC_334047_1
NIT NO. 04/2023-24 (1) (CE MH JAIPUR)
Open Tender
Civil Works
450 days
dausa
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,000
BOB, A/C No. 06680100019402, IFSC - BARB0ALWARX
₹78.4 L
14 Jun 2023
4 May 2023
26 May 2023
4 May 2023
25 May 2023
4 May 2023
Amount
H-SCHEDULE ITEMS
SITC cf PWM IGBTs Based technology 100% capacity rectilier charger 10KVA Online UPS with battery backup lor min. 60 Minutes complete with 65 AlL 16 Nos SME battries with corrosi n lree batery cabnet/stand . loop winng with suitable apaciny copper wire complete with following specitication input voltage- 400V, 3 Phase, 4 wire, 50 Hz, battery charger m. power- 13A. rominal output voltage-220-240V. AC. 1 Phase. 50 Hz online mode efficieney upto 96.2% noise at 1 Mtr. C-60db relative inumidity (oRH)-5-959 Non condensing) UPS Make:- Vertiv (Enmerson). GE. APC (Battery Make:- Exide/Quanta)
SITC cf PWM IGBTs Based technology 100% capacity rectilier charger 20 KVA Online UPS vith battery backup for min. 60 | Minutes complete KVA Online UPS vith battery backup for min. 60 | Minutes complete complete with 65 AH 32 Nos SMF battries with corrosin free battery cabinet/stand , loop wiring with suitable capacity copper wire complete vith following specification input voltage- 400V, 3 Phase, 4 wire. 50 Hz, battery charger m. power 13A. r.ominal output voltage-400/415V, AC, 3Phase, 50 Hz online mode efficiency upto 96.2% noise at 1 Mtr. C-60db relative umidity (%RH)-5-959 Non condensing) UPS Make:- Vertiv (Emerson). GE. APC (Battery Make:- Exide/Quanta)
NOTE:- 1.The above rates are for this work specific and shall not be generalized for other works. 2. The rate received in tender be intimated to this office before approving the tender.
Supply, installation, testing and commissioning of EPABX system consist, no. of extension, no of junction, no. of expandable eport, operating console, current on max. load with ISDN compatible of approved make and labor as required as per specifications.
EPABX system consists of 64 nos. extensions, 16 nos of junction & upto 128 nos. of expandable eport, with one operating console, 3 Amp max. current
Supply, installation, testing and commissioning of telephone instrument as approved by architect (Siemens/ Panasonic/ Tata/ BPL)
This should be a hermetically sealed, single sliding door of 2.1 (H)X 1.8 m(W), The controller should be capable of being operated by elbow switches/foot switches as well as touch less sensor.The track should be of Aluminum and the running surface for the top rollers should be suitably angled to reduce resistance to movement. The door leaf should be hung by means of hard plastic rollers of high quality with double bearing at the top. Rollers should be provided under the Aluminium track to enable smooth and noiseless movement. Opening and closing of the door should be microprocessor controlled electromechanical movement. The door material should be of HPL Color should match the interior and care should be taken to make the leaf strong and light weight. One should be able to open and close the door effortlessly incase of failure of automatic mechanism. Door opening handle should be strong and sturdy. Material should be of SS (gloss finish). Should be provided with high quality cylindrical lock. Door leaf should have high quality synthetic rubber gasket with long life to ensure hermetic sealing (to maintain air pressure differential). Air tightness 99.99% at a pressure of 100Pa.The finished floor on either side of the door should be perfectly level (maximum permissible difference +1mm). The overall thickness of the finished door should be 60mm. The inner part of the door should be filled with CFC free polyurethane foam thickness of 52 mm nearby. (Sealed airtight to prevent further ingress of any microbial organism). The door and controls should comply with IEE regulation. SDA04 automation with battery backup PMDC motor. Door should be with vision window 300 mm x 300 mm with double glazed panels and hermetically sealed. Door movement should have minimum noise. The starting time after receiving the signal should be adjustable between 0.5 to 20 seconds. Test certificate for hermetically sealed door frame (factory test certificate) should be enclosed with the pre dispatch documents.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 100 mm
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of equired size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick
Bidder Name
Amount
M/S GULSHAN RAI JAIN-II(GSTN-08AAJFG9017C1ZI)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.28 MB
Tendernotice_2.pdf
PDF • 7.03 MB
Tendernotice_3.pdf
PDF • 0.57 MB
biddocmandawari.pdf
Other Document • 13.58 MB
BOQ_592742.xls
BOQ • 1.20 MB
Download all tender documents and submit your bid