N I T

Providing, erecting and giving test of submersible monoblock pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suita ble for working on 415 V ± 10%, 3 Ph,50 Hz AC Supply, with cable guard, thrust carbon/fiber bearing to withstand entire h ydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. Cap-30 HP,

SLUICE VALVE Providing double flange sluice valve confirming for 1514846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.

REFLUX VALVE Providing and supplying ISI mark CI D/F reflux valves (non-return valves) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc complete. Reflux valves as per 15.5312 Part 1 (1984)

KINETIC AIR VALVE Providing and supplying Air Valves as per 15- 14845-2000 and MJP's standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete 25 MM DIA, PN 1

M. S. D/F PIPES & SPECIALS Designing fabricating providing erecting MS pipes and specials for cable tray supports. Drain pipes for D.G set, Pipe works & items related to all other similar work including cutting, bending & Painting as per detailed specifications.

6 M.S.STRUCTURAL STEEL WORK Providing fabicating and fixing MS Structural Steel work for necesaary Support of Panel Board, Sluice Valve Reflux Valve, Delivery Line and Lifting arrangement etc complete per detailed specifications attached.

L.T. PANEL FOR 30 HP Supplying & erecting automatic control panel for 3 PH 415 volt, ac Submersible/centrifugal pump set upto 30 HP consisting of Star Delta starter having relay range 30-50 Amp, SPP., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration, proof enclosure with IP 54 protection Control Panel should offer single phasing phase reversal, phase imbalance etc.

Gi Pipe Item No.3 Providing at site of work PVC/G.I. Pipes as mentioned below as per relevant IS specifications including all taxes, freight charges, octon, loading, unloading, transportation upto the site of work, paying Third Party (approved by MIP inspection charges, guarding pipes till hydraulic test is given and line is commisioned etc. complete 80 mm G Medium

EARTHING Supplying & erecting Galvanised cast iron plate 60 x 60 X 0.6 cm burried in speciallyprepared earth pit refilling with 40 kG charcoal & salt in alternate layers 19 mm dia. Vertical G.I. Pipe 1.5 mtr lon with funnel & mesg@top for watering a break masonry block, C. cover complete with necessary length of double G.1. earth strip bolted with plate & covered in 12 mm dia. G.1. pipe 2.5 mtr long complete connected to nearest switchgear with end socket as per direction & duly tested with earth tester & recording the results etc complete as per detailed specifications 4 Nos.

G. 1. EARTHING STRIP/WIRE Supplying & erecting G.1.strips 25 X 5 mm as per datailed specifications

Cables Providing erecting commissioning of cable 1 Run x 4, C x 16 sq mm AL XLPEArmoured cable from MSEB to Mains to Panel (Underground laying of Cable) (7-1-27)

1x 3 x 2.5 sq.mm ALAR CABLE FOR CAPACITOR

3C.2.5. sq mim Copper Submersible cable from Starter to Motor (12-4-8)

3C x 1.5 sq mm Copper Submersible cable from Starter to Motor (12-4-8)

Cable Glands & Lugs Terminatation etc

Making trench of suitable width and depth in soft soil for laying provided LT cable of 16 sq mm & complete as per specification no CW-EXNCTR (16-1-1)

Tools

1 Providing D.I. K-9 Providing Df pipes (push on joints pressure pipes of C.I of following class and diameters confirming to the 1.5.specification inclusive cost of jointing materials(Rubber gaskyt of EPDM Quality) Excluding GST lived by GOI & GOM in all respejincluding Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store/site of work, unloading. stacking etc. completed as directed by Engineer -in-charge (15) 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition/revision with amendments for Rubber Gaskets. 200 mm. DI K-9

Providing and supplying ISI standard D.I. specials & fittings with sealing rubber gasket of S.B.R., complete with Cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of all labours and materials and transportation to stores / site, loading, unloading excluding GST levied by GOI & GOM in all respect etc complete as per 15 9523.

Providing and supplying ISt standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. Plain ended specials or plain ended branch flanged specials of all diameters.

Providing and supplying double flange sluice valves confirming for Is 2906/14846 including warn gear arrangement as per test pressure stamless steel spindle caps taxes transportation levied by GOI & GOM all respect etc.complete Without by pass arrangement PN-1 AjSluice valve PN-1.0 (without by pass arrangement) 150 mm dia

Providing and supplying at site ductile iron / Spheroidal Graphite (SG) iron single/Double chamber tamper proof air valve without isolating sluice valve. Valves in accordance with BSEN 1074-4 of PN 10/16 rated, with body and bonnet of ductile iron confirming to EN 1563/15 1865 Gr. 500/7 or Gr 400/15 floats, float guide, seat ring of stainless steel 1.4436/1.4306, seat ring gasket of WRAS approved EPOM rubber (suitable for drinking water), internal fasteners of stainless steel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & GSK guidelines with a coating thickness of min. 250 microns. Flange connections as per 15 1538 raised face & pressure testing at manufactures works shall be done as per 15 14845. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. (For PN 10 & 16) Providing Tamper proof Air Valve 80 MM

6 Excavation in earth, soil & murum Excavation for foundation/pipe trenches in earth, soils of all types, sand, gravel Excavation for foundation/pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

Excavation for foundation/ pipe trericfies in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-incharge, normal dewatering. preparing the bed for foundation and excluding backfilling, etc. complete. Excavation for foundation/pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means.

Filling in plinth and floors murum bedding in trenches with approved marumb from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction complete

Lowering, laying and jointing with SBR rubber gaskets CL S/S pipes of various classes with C7/MS specials of following diameters in proper poution, grade and alignment as directed by Engineer-in-charge duding conveyance of materials from stores to site of work. including cost of jointing materials and rubber rings, labour, giving hydraulic testing, etc. complete. (15-5382 & 12820) 200 mm. DI K-9

Hydraulic testing of C.1/0.1 pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for Elling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc, required for testing. The rate under this item shall alse include cost of retesting, if necessary and reinstating to original position using water supplied by the 200 mm. Di K-9

Loweting, laying and fixing in proper alignment and position all types of Ci, air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves Providing Tamper proof Air Valve 50 MM

1 providing and fixing in position air valve shaft including providing and eung Gi Medium Class or 6 mm thick M5. pipe shaft 2.70 M long ever branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M150 as shown in type design together with providing and making flanged joints wherever required and fheing of as valve tee, etc complete as per type design and as directed by Engineer in-charge for following diameters of pipe lines (type design attached upto 200 mm to 400 mm

Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete 150 mm.dia

Providing and laying in situ Cament Concrete M-15 of trap/ granite/quartzite/gneiss metal for foufidation and bedding including bailing out water, form work, compaction, cuting, etc complete. PCC 150

Refuling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging etc. complete

Providing and constructing B.B. masonry valve chamber with 15 cm thick 126 proportion PCC bedding, excluding excavation, 8.8. masonry in CM 15 proportion 12mum tuck cement plaster in CM 14 proportion on both sides, CC 124 15cm thick for coping and preeding and fixing SRC manhole frame and cover, etc complete as

Please Enable Macros to View BoQ information