PROVN OF TOILET and BATHROOM (02X INDIAN TYPE WC,01X ENGLISH TYPE WC AND 02X BATHROOM) AT MH FATEHGARH

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation / trenches for laying pipes/ cable and similar work and getting out in soft /loose soil etc complete all as specified and directed

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M & L for Concrete bed to 200mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified and directed

M & L for Providing precast cement concrete 1:2:4 type B-1 (using 20mm grades stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and setting in mortar 1:4 complete with joints to match etc complete all as specified and directed

Supply and laying Reinforced concrete pipes, 200mm dia, class NP2, laid and jointed complete with collars etc complete all as specified and directed

M & L for Reinforced cement concrete Nominal mix type B1 1:2:4 (using 20 mm graded stone agg) in foundation, footings, Plinth beam etc complete all as specified and directed.

M & L for Reinforced cement concrete Nominal mix type B1 1:2:4 (using 20 mm graded stone agg) in columns, pillars, piers, posts and struts etc complete all as specified and directed.

M & L for Reinforced cement concrete Nominal mix type B1 1:2:4 (using 20 mm graded stone agg) in beams, cantilevers, bressummers, lintels over 1.5 m span etc complete all as specified and directed.

M & L for Reinforced cement concrete Nominal mix type B1 1:2:4 (using 20 mm graded stone agg) in Slabs supported on walls,beams and columns in floors,roofs, landings,balconies,canopies, deck slabs and in shelves etc complete as specified and directed.

M&L of mild steel TMT Bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends binding with and including mild steel wire (annealed) not less than 0.9 mm dia securing with clips complete all as specified and directed .

M&L of mild steel TMT Bars but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends binding with and including mild steel wire (annealed) not less than 0.9 mm dia securing with clips complete all as specified and directed .

M&L Brick work using old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L Brick work using old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius in half brick thick wall built in cement mortar (1:6) complete all as specified and directed.

M&L broken stone hard core of gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thick watered and rolled/ rammed to a true surfaces complete all as specified and directed.

M&L for PCC type E-2 (1:5:10) (using 40mm graded stone aggregate) as in sub base of flooring and mass concrete etc. complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in flooring and finishing the surface even and smooth without using extra cement complete all as specified directed.

M & L Rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement.

M & L for preparation of new plastered surfaces of walls and applying two coats of OBD over a coat of chalk whitening complete.

M & L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement.

M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

M&L PCC (1 : 3 : 6) type C2, 75 mm thick ( by using 40mm graded stone aggregate) for plinth pretection finishing even and smooth without using extra cement with necessary expension joints at every three metre or change of directiion complete all as specified & directed.

M & L Rendering 5mm thick in CM (1:3) on fair faces of brick work ceilling concrete surfaces to be finished even and smooth without using extra cement.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceilling complete.

M&L Non skid mat finished coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of Each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick screed bed or bedding layer of cement mortar (1:6 ) for laying floor finishes all as specified and directed .

M&L Glazed coloured ceramic tiles in vertical surfaces 450mm x 300 mm x 7 mm thick (pattern/digital tiles) set and jointed in neat cement slurry and pointed in white or colour cement to match over plastering 10mm thick on fair faces of brickwork or concrete surfaces in CM (1:4) to receive wall finishes as specified and directed ..

S & F Solid PVC Door frame of size 50mm x 47mm made out of 5mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S Frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock and bottom rail on either side & as gap insert for tip rail & bottorm rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/seated to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing.

S&F Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S&F 32 mm th Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

Supply & fixing Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

Preparation of new steel surface of any description not otherwise described over 10 cm width or grith and applying two coats of synthetic enamelled paint over a one coat of redoxide primer alround complete all as specified and directed.

M&L for preparing new surfaces of wood and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F mild steel butt hinges cold rolled of size 100mm medium weight.

S&F Aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed.

S&F Aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed.

S&F 300 mm long aluminium anodized, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

M&L for Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished susrfaces of concrete complete all as specified and directed.

M&L for Formwork to sides and soffit of floor or roof beams,beam haunching, girders,bressum-mers, lintel, cantilevers, shelves including supports,overhangs,etc.also plays between floors and beams, etc for rough finished susrfaces of concrete complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished susrfaces of concrete complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for rough finished susrfaces of concrete complete all as specified and directed..

S&F Brass chromium plated shower rose 125 mm including fixing with Swivel shower of PTMT any colour for fixing with 15mm pipe(Minimum weight 40gms) complete all as specified and directed.

S&F Brass CP wall mixer with L bend for mixing hot & cold water screwed down for iron pipe and fixed to 15mm bore pipe complete all as specified and directed.

S & F Brass chromium plated, Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

M & L PVC (SWR) couplers 75 mm complete all as specified and directed.

M & L PVC (SWR) couplers 110 mm complete all as specified and directed.

S & F Vitreous China Urinal, Half stall type, white), with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified and directed.

S&F Vitreous China Wash Basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets , 32 mm PVC waste pipe, 32 mm PTMT Waste coupling and 15 mm dia Pillar taps fancy type chromium plated complete all as specified and directed

S& F Gun metal glove or gate valves. With iron wheel head, screwed both ends for 20 mm iron pipe and fixed screws complete all as specified and directed

S&F Low Level Flushing System PVC valveless syphonic action type, 10 ltrs capacity white, with inlet, ball float and handle including brackets complete all as specified and directed.

S&F Chromium plated bib tap Chromium plated fancy type screwed down for iron pipe and fixed to 15mm bore pipe complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S & F for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F vitreous china urinal partition white of size 310 mm X 700 mm complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks tripple layer white in colour 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT Float valve complete all as specified.

S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed.

....ditto as above but for 20 mm dia bore tubing ...ditto..

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws

S&F Vitreous china premium/ 1st quality wash down water closet EWC white/ ivory/off white (closedpattern incl all necessary accessories like rag bolts/ gel gasket,white seat cover etc.complete in all respect all as specified.

S & F Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed

S&F in vitreous china squating pan "Orrisa" patern size 580 mm x 440 mm white with 'P' or 'S' trap front or back inlet with integral foot rest including provision of lime concrete bedding complete all as specified and directed .

M&L of 75 mm dia.PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete.all as specified and directed .

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete.all as specified and directed .

Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified and directed.

Removal of surplus excavated soil to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point all as specified and directed.

S & F PVC ( SWR ) pipe 75 mm dia single socketed in any length with rubber ring joints ,fixed to wall or laid in floor complete all as specified and directed.

S & F PVC ( SWR ) pipe 110 mm dia single socketed in any length with rubber ring joints ,fixed to wall or laid in floor complete all as specified and directed.

M & L PVC ( SWR ) vent cowl 75 mm complete all as specified and directed.

S & F PVC ( SWR ) bend 75 mm complete all as specified and directed.

S & F PVC ( SWR ) bend 110 mm complete all as specified and directed.

S&F sheet glass 3 mm thick ordinary quality and gazing with oil putty in square n exc 0.5 sqm each panel all as specified and directed by Engineer-in-Charge.

M&L for point wiring with 1100 volt grade PVC insulated and unsheathed 1.5 Sq mm (FRLS) multistranded copper conductor cable with continuous earth wire of 1.5 Sq mm (FRLS) multistranded copper conductor cable PVC insulated and unsheathed, drawn in & including concealed PVC rigid conduit medium grade with fittings (ISI marked) sunken pressed steel galvanised terminal boxes with top cover ISI marked plastic laminated hylam sheet for housing/ fixing switches etc for One light/ holder/fan/exhaust fan point controlled by one switch complete all as specified and directed for the following- Note- (i) The quoted rete is deemed to be included for the chases cutting. (ii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour.

All as per item above but for One 5 pin 5 Amp socket point controlled by one switch on same board.

S&F Switch Piano flush type 5 Amp single pole one way.

S&F Switch socket combination 2 in 1, 6A flush type complete

S&F Ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed.

M&L for sub main wiring with two single core 6 Sqmm FRLS copper conductor PVC insulated and unsheathed cable including PVC conduit medium grade concealed in wall for sub main connection including 6 Sqmm FRLS insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. (Note :- Two runs of 6 sqmm FRLS and one run of 6 sqmm FRLS copper conductor shall be measured as one unit length)

S&F of MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified.

S&F of MCB SPN 63 Amp 240 volt 'C' curve complete all as specifed and directed.

S&F of MCB of MCB SP 10 to 32 Amp 240 Volt 'C' curve 10 KA complete all as specified and directed.

S&F of LED lights fitting 4 feet, 20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers including complete fitting all as specified & directed.

Supply, fixing, commissioning and testing of water heater (Geyser) vertical type, mounting type 25 litres capacity with glass lined steel tank, shock resistant ABS outer body, swirl flow technology with copper heating element 2000 watts capacity and all specification as per BEE 5 star rating (2023) including al connected accessories such as safety valve, thermostat, multifunction LED indicator, PVC inlet/outlet hot & cold connection pipes, NRV etc,incl grouting 04 nos of bolts in PCC (1:2:4) block in wall & making good disturbed surface matching with existing colour complete all as specified and as directed..

S&F 15mm dia bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and as directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good disturbed surface match with the existing surface, cutting not exc 10 cm but not exc 20 cm girth complete all as specified and directed.

S&F stop valve angle cast copper alloy 15mm dia with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and as directed.

Supply, and fix 15 mm bore GI tubing medium grade with screw, socket joints with all fittings/fixtures like bends, sockets, unions, nipples etc on wall or floor including making alterations in existing /new pipes as required complete all as specified and as directed.

S & F of metal plug & socket DB with metal plug and MCBs dobule pole and neutral enclosere with a two pin earth plug and socket suitable for 20 Amp complete with one single pole MCB 20 Amp complete all as specified and directed.

supply and fixing for 20 mm bore galvanised steel tubing, medium grade with fittings and fixed to wall, ceilling or laid in floor, trenches complete all as specified and directed.

Cutting existing CI/GI pipe line 20mm dia for insertion of tee of size 20 x 20 x 20 mm for branch connection including excavation and earth work complete all as specified and directed.

Supply and fix gun-metal, globe or gate valvs, 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F building security LED Light 30 Watt made up pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC having top opening separate driver compartment with IP-65 protection and impact resistance of IK 07 for building secuity purpose with bracket size made of GI pipe medicum grade 40 mm dia 1.5 mtr long bend to shape as required and fixing with two nos MS Clamp of size 40x6 mm for fixing of builiding security light fittings completed all as specified and directed.

M/s Moti Babu Agarwal

SIDDHIVINAYAK CONSTRUCTIONS