SPL REPAIR TO CERTAIN OFFRS MD ACCN P and H TYPE IN SHANKAR VIHAR UNDER GE SOUTH, DELHI CANTT-1

M & L for Providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M & L for Anti termite Treatment of soil under existing floors using chemical chlorpyrifos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of reinforcement to facilitate demolition (Parapet wall) complete all as specified and directed.

S&F TMT bars 10 mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc cut to length bent to shape required including cranking, bending, spirally hoping for columns, hooking ends and welding the new reinforcement with old steel bars complete all as specified and directed.

S&F 8mm dia TMT bars, cut to length bent to shape required including cranking bending spirally for hoping for columns, chajjas to parapets etc hooking ends and binding with mild steel wire not less than 0.90mm dia complete all as specified and directed.

Demolition of Brickwork built in CM including all quioins, arches, pillars etc complete all as specified and directed.

M&L old size Brick work with sub class "B" bricks , straight or curved on plan exc 6 m mean radius built in cement mortar (1:6),(up to two story bldgs) complete all as specified and directed.

M&L old size Brick work with sub class "B" bricks , straight or curved on in half brick thick wall built in readymix cement mortar (1:4),(up to two story bldgs) complete all as specified and directed.

M&L for Dismantling of brick tiles (laid flat or on edge) on roof surface.laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Demolition of mud in roof, any thickness, including plastering and leeping upto two storey bldg incl necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of) and removing from cantonment area or as directed by Engr in charge and specified.

M&L for Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in roof padding, foundation, filling & mass concrete including cleaning the concrete surface by steel wire brushes, up to three stories bldgs complete all as specified and directed.

M&L for APP based polymeric membrane plain finish minimum weighting 3 kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints complete all as specified and directed.

S&F for Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (Solar Refractive Index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on and including 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner complete all as specified and directed.

M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops,rounded or chamfered, coping and hold fast on edge including necessary form work complete all as specified and directed..

Demolition of stone slab and tiles of any description or thickness on cooking platform, floors, aprons, skirting etc laid bedded and pointed in any morter complete all as specified and directed.

M&L for Granite (of any type) work, 18-20 mm thk (table rubbed and polished) in steps, jambs, pillars, cooking platforms, skirtings with necessary hole for gas pipe where ever required and likes on cement mortar bedding of cement mortar 1:4 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed.

M&L for Udaipur green marble work 18 to 20mm thick (table rubbed and polished) in steps, riser/skirting, jambs, pillars, window cills, and like including in cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and including Non-slip system for treads ( 03 Nos groves ) complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 20-25mm thick over 20mm thick cement screed bed laid in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar, laid 15mm thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Glazed Ceramic coloured tiles in vertical surface 600X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick backing coat of cement mortar (1:3), complete all as specified and directed.

M&L for Vitrified Ceramic tiles light shade, 8-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size (600mm X 1200mm), in floors etc. set and jointed in neat cement slurry and pointed in approved cement tile grout with 4mm spacer complete including 15mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M&L for vitrified ceramic tiles double charged (light shade) 8-10 mm thick (Square/ rectangular) area of each tile as matching with above as in skirting laid on 10mm thick cement plaster in CM (1:3) , set and jointed in neat cement slurry and pointed in approved cement tile grout with 4mm spacer complete all specified and directed.

M&L for Non Skid ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, as in skirting laid on 10 mm thick cement plaster 1:3, set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and directed.

M&L for Non Skid ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan sinlge piece syphonic action, white fixed in repair,including soft close sheet cover of closed pattern with flat bottom complete including dual flushing cistern viterous china 10 ltr capacity complete all as specified and directed.

S & F in repairs Vitreous china squatting pan ‘Orissa’ pattern, size 580 x 440 mm, coloured, with integral foot rests, fixed in repairs including provision of lime concrete bedding complete.Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S&F in repairs low level flushing cistern of 10 ltrs capacity PVC valveless, syphonic action type, white with inlet ball valve float and handle complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S & F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S & F in repair Vitreous china wash basin, flat back, size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed.

S&F in repairs stainless steel foldable towel rack 60 cm long and 24 cm deep with towel rail and hangers at bottom fixed to walls complete all as specified and directed.

S&F in repairs brass chromium plated shower rose of size 125 mm with long arms (300 to 450 mm) including fixing to CPVC complete all as specified and directed.

S&F in repairs 6 mm thick glass corner shelf fancy type with railing and fitting complete of size 25cm x 25 cm of best quality (as per sample approved by Engr -in-charge) complete all as specified and directed.

S&F in repairs wash hand basin mixer single lever 15mm dia CP brass fancy type including joints to CPVC pipe or unions complete all as specified and directed.

S & F in repairs Brass CP Wall mixer (Non Telephonic Type) with L bend 3-in-1 for mixing hot & cold water screwed down for CPVC pipe 15 mm bore and fixed complete all as specified and directed.

S&F in repairs Kitchen sink mixer 15mm dia CP brass fancy type including joints to CPVC pipe or unions complete all as specified and directed.

S&F in repairs 15 mm bib tap, chromium plated brass fancy type (quarter turn), long body screwed down including necessary extention piece complete all as specified and directed.

S&F in repair 15 mm dia chromium plated brass angle valve fancy type (quarter turn), screwed at ends including necessary extention piece and fixed complete all as specified and directed.

S&F in repairs Good quality Connecton pipe (PVC) 15 mm dia and 450/600mm long complete all as specified and directed.

Taking down (Door) chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and directed.

Taking down (Door) chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (without taking off shutters from the frames) including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and directed.

M & L for Cement concrete (1:2:4) type B0 using 12.5 mm graded stone crushed aggregate as in back filling, holdfasts etc, complete all as specified and directed.

S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick with edge lipping tape allaround 0.8mm to 1.00mm thick, comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in- Charge. Note: stainless steel butt hinges shall be paid separately under relevant item.

Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER with edge lipping tape allaround 0.8mm to 1.00mm thick, consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item

S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-charge. Note:- For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.

Dismantling wrought iron or mild steel/cast iron work of any description (steel window & Grill) complete all as specified and directed.

S&F in repairs chequered aluminium sheet 2mm thick in tank platform complete all as specified and directed

S&F aluminium window as per TD drg No. CEDZ/TD-316 (refer GE/CE office) with following specifications complete all as specified and as directed :- (i) Outer frame of size 40mmx114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded. (ii) Center mullion of size 40mmx65mm. (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter. (iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm SS 202 grade round bar. (v) Welded wiremesh shutter (2 Nos) of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE. (vii) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge.

S&F in repairs aluminium ventilator with outer frame 40mmx114mm with 1.3mm thickness corner 45 degree cut & aluminium welded center mullion size 40mmx65mm partly glazed/ gauzed including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws , MS wire mess , 3mm thick sheet glass etc. provision for fixing the exhaust fan complete all as specified and as directed.

S&F in repairs aluminium window as per TD drg No. CEDZ/TD-316 (refer GE/CE office) with following specifications complete all as specified and as directed :- (i) Outer frame of size 40mmx114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded. (ii) Center mullion of size 40mmx65mm. (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter. (iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm SS 202 grade round bar. (v) Welded wiremesh shutter (2 Nos) of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE. (vii) Windwo shall have provision for installation of window AC/Desert Cooler and provision of windwo glass shutter, wiremesh, grill and necessary fittings and locking arrangements for subject portion will be modified as per ground requirement during the execution as per directions of Engr-in-charge. (viii) Window shall be installed with silicone.

M & L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L for preparation of new Steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and directed.

S & F in repair for mild steel, 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M & L for preparation of old Steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coats of synthetic enamel paint complete all as specified and directed.

S&F in repairs 150mm long (size) butt hinges, stainless steel AISI 304 grade with brass/bronze hinge pin complete all as specified and directed.

S&F in repairs stainless steel AISI 304 grade barrel tower bolt 200mm long, extruded section,etc. complete all as specified and directed.

S&F in repairs stainless steel AISI 304 grade handle of size 200mm long,etc. complete all as specified and directed.

S&F in repairs Stainless steel of AE SI 304 Grade, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F in repairs Hasp and staple -100 mm size, safety type, brass including bolt to hinge plate, fixed with screws complete all as specified and directed.

S & F in reparis Floor door stopper (double leg) of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor; overall length of cover plate 60mm complete all as specified and directed.

S&F in repair 25 mm dia and 1mm thickness SS curtain rod , with fixing brackets, side knobsof good quality as approved complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

M & L for Cement concrete (1:3:6) type C1 using 20mm graded stone crushed aggregates in plinth protection, 50mm thick, finished fair and even without using extra cement, complete all as specified and directed.

M & L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set jointed and pointed in neat cement slurry in floors, with grey cement and no pigment including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete all as specified and directed.

Taking up or down steel tubing and connections of the following, complete all as specified and directed:-

a) 15 mm bore

b) 20 mm bore

c) 25 mm bore

Supplying and laying of CPVC 20mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl brass coupling fittings complete all as specified complete with fitting as required.

Supplying and laying of CPVC 25 mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl brass coupling fittings complete all as specified complete with fitting as required.

Dismantling water tanks of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed.

Dismantling water tanks of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

S&F in repair 500 ltr capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) white colour hoisted and fixed in position incl 20mm Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair 1000 ltr capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) white colour hoisted and fixed in position incl 20mm Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S & F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore complete all as specified and directed.

S & F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25 mm bore complete all as specified and directed.

S & F in repairs Sinks with drainage board made of 1mm thick stainless steel for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PVC waste pipe 32 mm bore, 65 cm long complete all as specified and directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drains pipes , jointed in cement morter and taking out of trenches if required up to 100 mm internal dia of drains, complete all as specified and directed.

S&F in repairs 110 mm PVC pipes (SWR), single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed.

S&F in repairs 75 mm PVC pipes (SWR), single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed.

S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S & F in repairs PVC 110mm bore (SWR) branch piece, double (double Y) equal or unequal, with access door complete all as specified and directed.

S & F for 110mm bore PVC (SWR) junction double (double T) equal or unequal, complete all as specified and directed.

S&F in repairs 75 mm PVC (SWR) Bends (any radius), with or without oval access door as required complete all as specified and directed.

S&F in repairs PVC multi floor trap with grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.

S & F in repairs Stack clamps 100mm bore made out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for any bore and any type of pipes complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc including removal of debrish from the MOD land complete all as specified and directed.

M &L for providing and applying a bond coat of Latex : Water : Cement - 1:4:6 consumption @100gm/sqm on the brick wall surface by brush as per manufacturer's recommendations including curing complete all as specified and directed.

Expose the first joint of masonry structure at ground level horizontally. The plaster must be knocked off at least 50 cm beyond the visibly penetrated area. Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm. Drilling Holes : Drilling holes 10mm diameter in masonary structure along the side of the joint as per manufacturer's instructions so as to cross the brick/ block at the intervals spacing of 15-30cm depending on extent of rising dampness as per recommendation of engineer in charge. Cleaning of holes : Clean the holes by air blower prior to fixing nozzles. Install latex polymer packer injection packers 9.8mm diameter, 10cm long in the holes and tighten. Fix the packer securely using sealent. Cutting of Packers : Cut the packers after completion of grouting without damaging structural elements.

Supply and apply of a 3 part, very low viscous, elastic polyacrylic injection resin with a versatile and adjustable reaction time having Mixed viscosity : 3-11 M.pa.s at +20 Deg C, Reaction time : adjustable according to ambient temperatrure and execution requirement between 8-50 mins, pH – 9-10, tested as per Wissbau No. 2002-094-(1A) – Function test with re-injectible hose system. The holes should be drilled until a depth of approx 5 cm (for a 6cm thick wall) before the end of the wall is reached. Pump injcection of polymer resin compound at >20 bar into or behind fissures or into masonry joint which are allowing water to infiltrate into unwanted areas. If voids in masonry being injected contain insufficient moisture to activate the grout inject a small amount of water prior to injecting the grout. When movement stops or polymer compound appears at the packer move to the next packer and inject. If the dampness is heavy, inject similarly at next joint line complete all as specified and directed.

M&L for 15 mm thick rendering in readymix cement mortar on fair faces of brick work or concrete surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in ready mix cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in readymix cement mortar (1:4) mixed with WPC finished even and fair etc complete all as specified and directed.

M&L rendering 10 mm thick in readymix cement mortar 1:6 on internal brick/concrete wall surfaces of any description, and finishing the surfaces even and fair without using extra cement complete all as specified and directed .

M&L for rendering 5 mm thick in readymix Cement Mortar (1:3) on ceiling finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls/ceiling applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer & two or more coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

M&L for preparation of old decorated surface (plastered or unplastered) of walls/ceiling by complete removal of existing treatment by mechanical grinder and applying cement base wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer & two or more coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

Removing existing paint by scrapping with TruCare Wall Sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7”/9” to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed.

Providing and applying 1mm thick waterproof cement based putty @ 1Kg (undiluted) per Sqm of Asian Paints or its equivalent over the plastered/ old painted wall after scrapping to prepare the surface even and smooth, complete all as specified and as directed:- Step 1) Mix the putty powered by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer capacity of min 2.5 kg putty per minute). Step 2) Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Graco spray Machine (Model: EH 230 DI) or equivalent having DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041” or by manual. Step 3) Allow 6-8 hrs time to dry the putty surface.

Sanding of the putty surface with Asian Paints TruCare wall sander: L-01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7”/9” to make the surface free from dust etc. by skilled labour, complete all as specified and directed.

Providing and applying one coat of acrylic waterbased interior/exterior grade primer @ 0.8 ltr (undiluted)/10Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent having an electric motor of min 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed.

Providing and applying two coats of smooth acrylic EXTERIOR emulsion with rich matt finish having voc less than 50 grams per ltr complying leed criteria @ 1 ltrs (undiluted)/10Sqm diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface in both the coats of paint, complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size (with edge lipping tape allaround 0.8mm to 1.00mm thick) comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, complete as specified and directed. Note:- Material test certificate and authentication should be compulsory provided by the manufacturing company.

S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size (with edge lipping tape allaround 0.8mm to 1.00mm thick) comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, complete as specified and directed. Note:- Material test certificate and authentication should be compulsory provided by the manufacturing company.

S & F in repairs CP clip on hinges (Inset) complete all as specified and directed .

S&F in repairs 15mm mild steel and 1mm thick, chromium plated rod with fixing brackets, fixed in cupboards for hanging cloth of adequate strength all as specified and directed.

S&F in repairs stainless steel AISI 304 grade handle of size 100 mm long,etc complete all as specified and directed.

S&F in repairs Magnetic catcher for wooden cupbord with complete closer macanigum claps and clips fix with stainless steel screw complete all as specified and as directed.

M&L for cleaning the sides rolling shutter shafts guide channel and greasing of moving parts of rolling and straightening rolling and replacement of bolts nuts etc as required for smooth functioning of shutters and taking out existing rolling shutters if required and refixing the same in original position complete all as specified (opening of shutter exc 2.00 m and not exc 3.50 m and area exc 6.00 sqm and n.exc 9.00 sqm) complete all as specified and as directed.

S& F in repairs mild steel spring conforming to IS 62A-1970 of approved make in existing rolling shutters/opening of shutters exc 2.00 m and n.exc 3.5 m complete all as specified and directed.

Taking down rolling shutters of any size for repair and refixing in same opening including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish etc complete all as specified and directed.

S&F in repair steel rolling shutters, thickness of lath 1 mm, with out ball bearing, top cover, anchoring rod and hasp & staple, erected in position where required (in patches or whole), complete push pull or manual type, complete all as specified and directed.

S& F in repairs staianless plate rack made of 1 mm thick stainless steel sheet of size 750 mm x 900 mm x 210mm consisting of 3 shelf for bowls and one shelf for keeping six nos of big utensil and seven nos of small utensils divided by 10 mm dia stainless steel hollow pipe @ 60 mm centre to centre or as per drg and sample kept in GE"s office complete all as specified and directed.

S&F in repair stainless steel telescope channel of size 300MM to 500mm complete all as specified and directed.

S&F Stainless steel thali basket for kitchen cabinates of suitable size and shape complete all as specified and directed.

Providing conveyance for transportation of luggage incl packing (bubble wraps and cardboard required) and shifting & reinstallation of household items at new location like TV-01 No, AC-01/02 Nos (removal and reinstallation of windows/ split AC incl gas filling if required), Refrigerator -01 No, Washing Machine -01 No and Water purifier-01 No. Note:- Transportation of two wheelers and four wheelers not included in rates.

SEWAGE DISPOSAL Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and directed.

M & L for removing excavated soils exc. 100m but n.exc 150m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and directed.

Demolition of reinforcement cement concrete of any discription and in any position including cutting of reinforcement from adjoining RCC component to faciliate demolition including removal of demolished concrete from site outside MoD land complete all as specified and directed.

Demolition of brick works built in cement mortor complete all as specified and directed.

M&L old size brick work with sub class `B' bricks straight or curved on plan exc. 6mtr mean radius built in readymix cement mortor 1:4 complete all as specified and directed.

Taking down cement or cement line plaster on bricks on storne walls etc incl racking out joints, heacking for key, scrubbing down with water complete all as specified and directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in readymix cement mortar 1:4 to be finished even and fair including INTEGRAL WATERPROOFING COMPOUND complete all as specified and directed. Note:- Water proofing compound shall be paid in respective item.

Supply only Integral waterproofing compound as per IS complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L cement concrete type B-1, (1:2:4) using 20mm graded stone aggregate as in coping of masonry wall including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed stone ware or RCC pipe/PVC pipe) set in cement mortar 200 mm internal dia of pipe complete all as specified and directed.

M&L concrete bed to drain in PCC (1:3:6) type C2 incl packing under and haunching against the sides of pipes after they are laid and tested in bore of pipe 200mm dia pipe complete all as specified and directed.

S&F 200 mm PVC pipes Type 'A' (sewage), single socketed, in any length with rubber ring joints, laid in trenches complete all as specified and directed.

M & L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 225mm bore pipe line complete all as specified and directed.

S&F in repairs SFRC manhole cover 70mm thick of any size & pattern with frame set in cement mortar 1:4 complete all as specified and directed.

ROAD/PATH/HARDSTANDING Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

M&L 100mm thick Cement concrete type C- 2, 1:3:6 (40mm graded stone crushed aggregate) as in sub base complete all as specified and directed.

M&L for heavy duty groove tiles for commercial and public parking of size 300mm x 300mm of min thickness 10 mm suitable for high traffic and max grip and non-skid etc set and jointed in neat cement slurry and using 3 mm thick epoxy fill on tile joints over 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping/benching and all other similar works including necessary formwork complete all as specified and directed.

INTERNAL ELECTRIFICATION Taking down carefully aluminium/copper point wiring (light/fan/bell/socket /power) with complete fittings such as steel terminal boxes, switches, ceiling roses, pendents, regulators, sockets etc and removing the material including making good the distrubed surfaces of the wall flooring ceiling etc to match the existing surface complete all as specified and directed.

M&L for concealed point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed PVC conduit and including replacement of unserviceable pressed steel terminal boxes with Modular steel terminal boxes factory made including white cover modular plate with frame suitable for modular switches, modular sockets, modular fan regulators etc of required size complete including 1.5 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one 5 Amp switch one way using cable (1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing) . Note :- The rate is inclusive cutting/chasing and making good disturbed surface with CM 1:3 and same surface finishs with the adjoining surface of disturbed area with OBD/Colour wash/white wash complete all as specified and directed.

All as per item No 144 above but 5 Amp socket outlet on same board complete all as specified and directed.

All as per item No 144 above but One socket outlet 5 Amps on independent board complete all as specified and directed.

All as Item No 144 above but for one socket outlet 5/15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing complete all as specified and directed.

All as Item No. 144 above but for one light point controlled by two 2-way switches with cable 1.5 Sqmm size complete all as specified and directed.

M&L for concealed point wiring complete with stranded copper conductor 4 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed PVC conduit complete including 4 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for one socket outlet for modular AC Box on Independent board with cables 4.0 sqmm size for phase and neutral and 4 Sqmm for earthing complete all as specified and directed. Note:- The rate is inclusive cutting /chasing and making good the disturbed surface with CM 1:3 and same surface finishes with the adjoining surface of disturbed area with OBD/colour wash/white wash complete

S&F switch Modular type, 1 way 6A, 1 module complete all as specified and directed.

S&F switch, Modular switch 2 way 6A, 1 module complete all as specified and directed.

S&F Modular Socket, 6A - 2/3 pin 2 module complete all as specified and directed.

S&F switch Modular type 1way 16A, 1 module with indicator complete all as specified and directed.

S&F Socket 6A/16A - 2/3 pin combined complete all as specified and directed.

S&F Modular Bell push 6A 1 Module complete all as specified and directed.

S&F in replacement, decorative wall light mounting suitable for LED Lamp upto 15 Watt complete with all connections complete all as specified and directed.

S&F in replacement Surface mounting round shaped LED downlighter with durable housing with Al heat shrink with diffuser to give glare free light 12 Watt LED 6000K/6500K lamp type from ceiling of stairs/common areas, complete all as specified and directed.

S&F in replacement Wall mounted LED Integrated Batten 20 Watt - 4Ft White,CRI 80, Polycarbonate, 120 Lumens per watt, 6500K (cool White) 4000 K (Natural White), Pf < 0.90 indoor LED battern complete all as specified and directed.

S&F in replacement Wall mounted LED Integrated Batten 10 Watt - 4Ft White,CRI 80, Polycarbonate, 120 Lumens per watt, 6500K (cool White) 4000 K (Natural White), Pf < 0.90 indoor LED battern complete all as specified and directed.

S&F Modular AC Box with socket and MCB SP 20 Amp complete with Metal box, white colour plate and frame complete in replacement of sheet metal enclosures as per site requirement, complete all as specified and directed.

S&F in replacement of lamp holder Angle/ Batten type bakelite insulated body with back plate complete all as specified and directed.

S&F emergency LED bulb 12Watt, CRI 80 with minimum 2 hours battery backup, Frosted glass, 3000K white 100 Lumens/watt Pf <0.90, Min 25000 Hr IP rating 20 complete all as specified and directed.

S&F of electric bell Ding Dong type AC, 230 volts single phase complete all as specified and directed.

S&F ceiling rose surface Bakelite 65x25mm two to three terminals complete all as specified and directed.

S&F in replacement LED bulk head in engineering plastic housing with clear prismatic diffuser, 10W WHITE in replacement of old unsv bulk head fitting including all accessories connecting up twin core flexible copper conductor cable complete all as specified and directed.

S&F in replacement of building security light fitting 35W LED 5000K new Powder coated pressure die cast aluminium compact LED Street light including pole of dia 40 mm of bracket duly fixed with clamps, nut, bolts & washers etc and complete all as specified and directed.

Taking Down of ceiling fan and keeping it in safe custody and complete all as specified and directed at site.

Supply, Installation, testing and commissioning of 1200mm sweep BEE 5 star rated, Ceiling fan with remote control, Suitable cell for remote, Brush Less Direct Current (BLDC) Motor, Class of insulation : B, 3 Nos Blade, 30 cm long down road, 2 Nos canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery not less than 220 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%, and all remaining accessories including safety pin, nuts bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50 Hz, single phase AC supply complete all as specified and directed by Engr-in-Charge including taking down old ceiling fan and depositing to MES store yard.

Taking Down of Exhaust Fan and keeping in safe coustody and complete all as specified and directed at site.

S&F Exhaust Fan, Metal body, copper wound 300 mm Sweep with metal louver and connecting up with replacement of cable T/C flexible cable of size:- 1.50 Sqmm from ceiling rose / connection to fan complete all as specified and directed. Note :- For Fixing exhaust fan hole of suitable size will be done by contractor without extra cost were it is not available.

Taking Down of Geyser 50 ltr and keeping in safe coustody and deposit it to MES stire Yard complete all as specified and directed.

Supply & fixing of water vertical storage heater, 5 star, Glass lined enamel coated incoloy heating element , Shock resistant injection moulded ABS body, IPX4 waterproof technology, Tank design is suitable to withstand 8 bar pressure (Geyser) of capacity 25 litre ISI mark, , AC, electric, 415 volt, complete , 3 core lead, including PRCD Plug top, safety valve, PVC Connection including electric and water connection and making good to disturbed surface including taking down existing water storage heater complete all as specified and directed. (Notes :- (i) Existing old geyser to be taken down from wall and deposit to the MES Yard for custody.) (ii) Electric switch for geyser of 16 Amps shall be provided on main switch board of the bathroom and socket outlet shall be provided near the geyser and will be measured as 16 amps power wiring against relavent item as above.)

S&F in replacement of VTPN DB 4 way, 4Pole double door,415V vertical type for fixing MCCB up to 160 Amps as incommer and MCBs as out goings with metel door and IP 43 Protections and connecting complete all as specified and directed.

S&F in replacement of sheet metal enclosures double door for DBs when MCBs to be used SPN-08 Way, 240V complete as per site requirement and as directed by Engr-in charge.

S&F in replacement of sheet metal enclosures double door for DBs when MCBs to be used SPN-12 Way, 240V complete as per site requirement and as directed by Engr-in charge.

S&F in replacement of sheet metal enclosures double door for DBs when MCBs to be used SPN-4 Way, 240V complete as per site requirement and as directed by Engr-in charge.

S&F in replacement of MCCB 3 Pole .415 V. fixed type, 160 Amps with breaking capacity 36kA complete all as specified and directed.

S&F in replacement MCB SPN 63 Amps 'B' series, breaking capacity 10 Ka, 'B' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc complete all as specified and directed.

S&F in replacement MCB SPN 40 Amps 'B' series, breaking capacity 10 Ka, 'B' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc complete all as specified and directed.

S&F for MCB SP 40 Amps 240 Volts, 10kA, `B' curve all as per site requirement and complete all as specified and directed.

S&F for MCB SP 63 Amps 240 Volts, 10kA, `C' curve all as per site requirement and complete all as specified and directed.

S&F for MCB SP 6 to 32 Amps 240 Volts, 10kA, `B' curve all as per site requirement and complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to GI wire 4 mm as earthing lead by means of nut, bolts and check nuts and washers, GI light grade protection pipe 15 mm dia upto 7.5 M, GI watering pipe 20 mm dia medium grade, RCC cover with funnel, excavation in any type of soil, PCC pit charcoal, salt all as shown in electrical plate No 5 of SSR Part I, including earth test point upto panel board, all as specified, directed or indicated including testing on completion

S&F in replacement Sheet metal enclosure of size 350 x 250 x 150 mm suitable for mounting Pre paid meter fabricated from CRCA sheet with anti corrosive dust and vermin proof. Note:- The meter cover shall have a transparent window. The window shall be of transparent, high grade UV stabilized engineering plastic for easy reading of all the displayed values/parameters and observation of operation indicator. The window shall preferably be an integral part of meter cover complete all as specified and directed.

Taking down and re fixing pre paid meter in meter box with consultation with pre paid meter authorities including necessary connections of incoming and out going cables for light and power complete all as specified and directed.

Taking down unserviceable sub main wiring twin core of any size complete and making good disturbed surface complete all as specified and directed.

M&L for Sub Main wiring using single run PVC FRLS grade Insulated unsheathed, multistrand copper conductor cable 2 runs of 10 Sqmm for phase and neutral and 1 run of 10 Sqmm for earth wire drawn through concealed PVC conduit wiring in wall not less than 25mm dia with all fittings like tees, bends, junction/ terminal boxes etc as per site requirement and all as directed by Engineer-in-charge. Note:- Phase should be of Red /Yellow/Blue, neutral should be of back and earthing wire should be of green colour. 2 runs of cable for phase/ neutral and 1 run for earth will be measured and paid as one unit length.

S&F wall mounted fully automatic domestic type Electric chimney in 90 cm hood for 2-3 gas burners of suction capacity 700-1200 mtr cube/hr, touch , gesture control, sound level 64 dB (max), filterless autoclean material body glassy including all connecting accessories,fitting and fixtures all as specified and directed by Engineer-in -charge Note:- Work for fitting of chimney including hole of suitable size for outlet will be done by contractor without any extra cost.

Supply and fix wall mounted fan made of sturdy Engineering plastic complete voltage 230V, 50 Hz, Copper winding of sweep 400m complete all as specified and directed.

Supply and fixing of PVC conduit medium grade of size 15mm TV connection and Socket /Telephone socket complte complete all as specified and directed.

Supply and fixing TV Co-Axial Socket 1 module complete all as specified and directed.

Supply and fixing Telephone socket 1 module complete all as specified and directed.

Please Enable Macros to View BoQ information