SPECIAL REPAIR TO BUILDING NO P-151 AT CHAF BANGALORE

Amount

Taking down chowkhats or frames not exc 1.5 sqm with shutter(without taking of shutter from the frames) including taking out hold fasts and PCC bed block all as specified and directed by Eng-in-Charge.

Factory made solid PVC door frame (chowkhat) of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS wire tube supplied and fixed in opening as per specification and drawing complete all as specified and directed.

Factory made solid PVC Moulded Door shutter with particle board core,28 to 30mm thick (stiles), wtih 2,4,or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification & drawing and directed by Engr-in-Charge.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm and n.exc 4 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed by the Engr-in-Charge.

S&F Pressed steel frames for doors size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified and directed.

S&F Pressed steel frames for doors size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as filled in pressed steel foor frames etc complete all as specified and as directed.

S&F mild steel work as in band, strap, hold fast, clamp, cleat, hook, hinges base tie for floor, frame, support or stay for rain water pipe etc and other similar items conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and as directed.

S&F 30mm thick 1st class hard wood glazed and skeleton factory made shutter open rebated and prepared to receive glass, gause etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part-I, Sec-08, Clause 8.20(a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels , commercial type on both sides, fixed to chowkhats all as specified and directed.

S&F for 100mm long butt hinges medium weight , cold rolled mild steel.

S&F for 200mm long Aluminium, anodised, barrel tower bolts of extruded section.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section.

S&F 150 mm longe extruded aluminium alloy handles, fabricated type., anodised

S&F 200 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and directed.

S&F mild steel box type hinges with self closing assemply, suitable for wooden glazed and skeleton factory made shutter fixed with necessary nut, bolt , washers and welding with pressed steel door frame all as specified and directed.

S&F 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.

M&L for 1st class hard wood plain, solid, straight chowkhats, and frame wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints and fixed complete all as specified and directed.

M&L for 18 to 19mm thick pre-laminated partical board, interior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination, and fixed with screw and prepared kitchen cabinate and hanging on wall and also fixed to timber frame work where required all as specified and directed by Engr in Charge.

Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails for 18 to 19mm thick all as specified and as directed.

S&F 30 mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised

S&F 125mm long Hasp and staple, safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with screws

S&F in repair 20 mm dia curtain rods fancy type of aluminium annodised powder coated with fixing brackets (both sides), stops, rollers etc complete all as specifed and directed.

Taking down steel window/ventilator (without taking off shutter from the frame) n.exc. 2.00 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed by the Engr-in-charge.

S&F steel window/ventilator with side hung shutter including projecting type hinges with steel handles and steel peg stay and with glazing bars complete with dovetailed or welded all as specified and as directed.

S&F steel window/ventilator with side hung shutter including projecting type hinges with steel handles and steel peg stay and but without glazing bars suitable for fixing of gauze all as specified with dovetailed or weldedall as specified and as directed

S&F for framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders; framed balusters; walk ways; railings; framework of watertanks and similar work confirming to Fe-290, Gde E-165 all as specified.

S&F for 4mm thick sheet glass ordinary quality and fixed with aluminium beading in square not exc. 0.50 sqm in each pane complete all as specified and as directed.

S&F for 4mm thick Figured glass, pin head type and fixed with aluminium beading in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement morter bedding but not backing coat removing serviceable tiles to store and rubbish off premises etc complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm light shed, in floors etc laid over and including 15mm thick screed bed or bedding layer of CM (1:4), set & jointed in neat cement slurry & pointed in white or coloured cement to match all as specified and directed by Engr-in Charge.

M&L for vitrified ceramic coloured tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm laid over and including 10mm thick rendering in CM (1:3) on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade all as specified and directed by Engr-in Charge.

Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed or bedding in CM 1:4 complete all as specified and directed by Engr-in Charge.

Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm on vertical surfaces such as skirting with and including 10 mm thick backing coat of cement mortar 1:3 all as specified and directed by Engr-in Charge.

Non Skid ceramic tiles coloured of size 300 x 300 x 7 to 8mm thick as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles with 15mm screed bed 1:4 for laying floor finishes complete all as specified and as directed.

Glazed ceramic tiles coloured of size 450X 300X 7mm thick as vertical sruface set and jointed in neat cement slurry and pointed in white or colour cement mixed with pigment to match the shade of the tiles complete all as specifiedc and as directed with 10 mm th rendering 1:3 for laying wall finishes complete all as specified and as directed.

M&L for 25 mm thick cement concrete type B0 1:2:4 using 12.5 mm graded stone aggregate as in levelling concrete finished even and fair to recive floor finshes,all as directed

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubing down with water etc complete all as specified and as directed

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering rendering 10mm thick in cement morter 1:6 and 5mm thick in cement morter 1:4 in two layers on fair faces of brick work or concrete surfaces with water proofing compound @ 200 ml per 50kg of cement or as per manufacturer's instruction etc finished even and smooth without using extra cement complete all as specified and as directed.(Note : WPC shall be measured and paid separetely)

M&L for rendering 5mm thick on concrete surfaces of ceiling in cement morter 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Demiolition of concrete (unreinforced) of any description and in any position including existing treatment of sunken floor complete all as directed by Engineer-in-Charge.

M&L for PCC 1:5:10 Type E-2 (using 40mm graded aggregate) as in filling in sunken slab complete.

M&L for providing water proofing treatment to sunken floor complete all as per following specification :- providing 20mm thick cement plaster in cement mortar 1:3 in mixed with Pidi Proof LW or Dr Fixit @ 200 ml per 50kg of cement and finished even and smooth surface without using extra cement. Note : WPC shall measured and paid saperately

Application of two coats of pidifin 2k water proof coating i.e proof coat of Pidilite @ approx 1.00 Kg per sqm as per manufactures instructions. Note of item No 32 & 33 (i) The rate includes for preparation of surface treatment and sealing of all joints, cracks, corners and junction of pipes etc and ponding test complete all as specified and directed by Engineer-in-Charge . (ii) PCC filling shall be measured and paid separately. (iii) Water testing of sunken floor shall be carried as per direction of GE & rates quoted by the tenderer shall be deemed inclusive of expdr incurred on testing.

Demolition of brick/PCC block work built in cement mortar incl. all quoins, arches pillars etc but excluding ashlar facings etc.complete all as directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc 10cm in width and setting in mortar type C1 (1:3:6) set in cement mortar (1:6) all as specified and directed.

Demolition of cement concrete (unrienforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) as in plinth protection all as specified.

Demolition of cemet concrete padding or mud in roofs, any thickness, including plastering and leeping (whether full thickness removed oronly a part thereof) all as specified.

M&L for providing, cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate as in roof kerbs, padding or mud stops, rounded or chamfered on edges all as specified.

M&L for rendering 10mm thick in cement mortar 1:3 on roof padding finished even and fair with approved water proofing compound @ 200ml per 50kg of cement or as per manufacturer's instruction all as specified and as directed.(Note : WPC shall be measured and paid separately as supply only under relevent item)

Supply only liquid water proofing compound

M&L for water proofing treatment on horizontal and vertical surfaces with applying of oil bound bitumen primer @ 0.20 Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4.0 Kg/Sqm reinforced with non woven polyester matt weighing not less than 160 grm/Sqm having softening point not less than 150 degree centigrade, having tensile strength of 650 N/5cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch on application including minimum 10cm side over lap and 15 cm end lap applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.20 Kg/Sqm finished with solar reflective bituminus paint/primer @ 0.10 kg per sqm including removing of existing roof treatment all as specified and directed by Engr in charge.

S&F in repair Vitreous China wash down water closet pan (Pedestal Pattern) white including P and S trap ,including white plastic seat cover with mild steel CP hinging device, flush pipe complete jointing, connecting and making good the disturbed surfaces

S&F in repair Wash basin vitreous china white flat back of size 550x400mm including pillar taps 15mm dia fancy type, cast copper alloy, with capstan heads, chromium plated , 32mm brass chromium plated waste fittings, PVC waste pipe of suitable size, plug and porcelin stopper, CI brackets, cutting for and pinning in ends of brackets or erecting stand including taking down the old unserviceable one, complete all as specified and directed.

S&F in repair 15mm PVC connection 600mm long between ends with PTMT nut and washer complete all as specified and directed .

S&F in repair 15 mm bore Stop valves fancy type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specifed and directed.

S&F in repair 15 mm bore Stop valves, fancy type chromium plated with long shank and cup (concealed type), fixed, complete all as specified and directed . Make :Cera and equivalent makes of JOHNSON/ESS-ESS/ARK etc.

S&F in repair bib taps, fancy type with long neck chromium plated with crutch or butterfly hadle screwed down screwed for iron pipe or brass ferule of 15mm bore complete all as specified and as directed.

S&F CP two way bib cock with all accessories complet all specified and directed. Make :Make :Cera and equivalent makes of JOHNSON/ESS-ESS/ARK etc.

S&F Chromium plated brass 15 mm dia health faucet with 8 mm dia, 1.2 m long flexible tube with wall hook complete necessary fixing arrangements etc complete all as specified and directed. Make: Jaquar/Cera/Ess Ess or equivalent as approved.

S&F in repairs 7 to 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, fixed as in repairs, complete all as specified and directed .

S&F in repair CP shower rose with or without swivel joints 125 mm size including fixing to steel pipe or union 15 mm bore complete all as specified and directed.

S&F Stainless steel soap dish of approved make, complete all as specified and as directed.

S&F in repair Tubular towel rail, brass chromium plated 20mm dia, D type, 60 cm long between flanges, fixed to wall with chrome brackets complete all as specified and directed

S&F Sheet Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long all as specified and directed

S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm, fixed as in repairs, complete all as specified and as directed.

S&F stainless steel plate rack of size 990.60mm x 914.40mm including fixing to wall complete all as specified and as directed.

S&F 100mm size brass mortice lock vetical type, 4 levers, including plates and two keys incl cutting holes into existing pressed steel frames all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20 mm bore

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15mm bore

Taking down 25mm steel water tubing and connections, including cleaning for and refixing or removal to store.

S&F 15mm bore ‘Medium grade’ tubes,galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

S&F 20 mm bore steel water tubing medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors..

S&F 25 mm bore steel water tubing medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors..

S&F rotational moulded polyethylene water storage tank (cylindrical or vertical with closed top) 500ltrs capacity hoisted and fixed in position including dismantling of existing water tank and disconnecting pipeline connection as specified and as directed.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20mm bore iron pipe and fixed

S&F in repair Ball brass valves, 20mm bore high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified

Dismantling of PVC drain pipes of 75/100mm bore, including all fittings, jointed in cement mortar and taking out of trenches, if required and removing from site of work complete all as directed.

S&F 110mm PVC (SWR) pipes singlesocketed, in any lengthPVC (SWR) pipes singlewith rubber ring joints, fixed to walls

S&F 75mm PVC (SWR) pipes singlesocketed, in any lengthPVC (SWR) pipes singlewith rubber ring joints, l fixed to walls

S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints laid in floor.

S&F 110mm bore PVC (SWR) bends any radius

S&F 75mm bore PVC (SWR) bends any radius

S&F 110mm borePVC (SWR) junction single,(Single T) equal or unequal with access door

S&F 75mm borePVC (SWR) junction single,(Single T) equal or unequal with access door

S&F 110mm borePVC (SWR) vent cowl

S&F PVC (SWR) 75mm dia multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and as directed

S&F in repair PVC (SWR) floor trap 100/110mm dia, plain with grating including jointing with solvent cement

S&F in repair PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement

M&L for preparing new plastered surfaces of wall and applying two coats of oil emulsion distemper over one coat of chalk whiting primer over and including 3mm thick wall care putty all as specified.

Complete removal of existing treatement on wall and applying two coats of oil emulsion distemper over one coat of chalk whiting primer over and including 3mm thick wall care putty all as specified.

M&L for preparation of old decorated surfaces of wall and applying one coat of white wash all as specified and as directed.

M&L for preparation of new plasiered surfaces of ceiling and applying two coat of white wash all as specified.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of white wash all as specified.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint all as specified.

M&L for preparation of old decorated surfaces of walls and applying one coat of of cement based paint all as specified.

M&L for preparation new wood or wood base surface and applying of Filler coat with grey filler or liquid wood filler, transparent, and bringing forward surfaces to smooth even finishold of cabinets/book cases/ward robes of any description over 10 cm width or girth and applying one coats filler coat over a coat of pink primer

Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer

Preparation of old existing wood or wood based surfaces over 10cm width or girth and applying one coat of synthetic enamel paint

Preparation of old existing Steel surfaces over 10 CM width or girth and applying one coat of synthetic enamel paint

Removing building materials (any type) to a distance of 30 Km beyond the lead including in the rates, including loading, unloading and stacking at the destination all as specified and as directed. (Note : All debris shall be removed from MoD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

Supply and fixed rolled mild steel in roof trusses, ( framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee,angle,channel or flat sections ) including distance pieces , cleats etc.grade Fe-410-W ( Gde-E-250) quality -A complete all as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall in curved shape or any shape, fixed with self tapping screws as specified and directed by Engineer-in-charge.

Grinding and polishing of existing terrozo tile flooring using mechanical means including filling the openings/joints using white cement mixed with pigments as required to achieve the desired finish and finishing with oxalic acid all as specified and as directed

Grinding and polishing of existing vertical terrozo tile surfaces such as dados , skirting, etc, by hand or using mechanical means including filling the openings/joints using white cement mixed with pigments as required to achieve the desired finish and finishing with oxalic acid all as specified and as directed

Taking down carefully existing unserviceable point wiring with copper/ aluminium conductor cables (light, fan, socket or power) complete including fittings such as switches, ceiling rose, pendants, regulators, sockets but excluding light fittings complete and removing retrieved materials and making good the disturbed surfaces of wall, floor ceiling etc., complete all as specified and as directed.

M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 1.5 sq mm nominal area, passing through heavy grade PVC casing casing 'N' capping/ PVC conduit of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall for mounting switches,switch socket combination, fan regulators etc.covered with 3mm thick electroplated hylam sheet top cover for housing switches, sockets, regulators etc. complete for one light/ fan point, 5/15 amps switch/socket point including 1 run of 1.5 Sqmm green colour copper cable as continuous earth wire all as specified and as directed.

One light point controlled by one single pole 5 Amps switch

One fan point controlled by one single pole 5 Amps switch and regulator

One light points controlled by two Nos of two way 5 Amps switch

One switch socket out let point 5 Amps on independent board

One switch socket out let point 5 Amps on same board with other switches

One bell point controlled by one bell push

M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 2.5 sq mm nominal area, passing through heavy grade PVC casing 'N' capping/ PVC conduit of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall , covered with 3mm thick electroplated hylam sheet top cover for housing 15 A switches, 15A sockets including 1 run of 2.5 Sqmm green colour copper cable as continuous earth wire all as specified and as directed.

Supply and fixing inrepairs Piano type switch single pole 5 Amps one way 230 volts all as specified and as directed

Supply and fixing of Piano type switch single pole 5 Amps two way 230 volts all as specified and as directed

Supply and fixing inrepairs bell push 5 amps ,230 volts all as specified and as directed

Supply and fixing inrepairs PVC ceiling rose 65 x 50 mm surface type with 3 terminals all as specified and as directed

Supply and fixing inrepairs electronic fan regulator socketed step type upto 100 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm. make : Anchor/Crompton greevs all as specified and as directed

Supply and fixing inrepairs call bell 230 v single pole fancy type Ding Dong Bell all as specified and as directed

Supply and fixing inrepairs switch socket combination outlet 5 A , 5 pin Flush type all as specified and as directed

Supply and fixing inrepairs switch socket combination outlet multipurpose 2 in 1 , 5/15 A Flush type all as specified and as directed

Supply and fixing inrepairs LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all as specified and directed.

Supply and fixing LED lights fitting mirror type with high output diffuser 2 feet 1x 10W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all as specified and directed.

M & L inrepairs of sub main wiring with Two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 2 x 6 sqmm in and including heavy grade PVC casing and capping/PVC conduit and its accessories with fixing arrangements on surface, wall, floor or ceiling etc including 6 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length.

Supply & fixing of sheet metal enclosure MCB DB double door type 230v with 8 ways SPN suitable bus bar model inrepalcement of old unserviceable DB all as specified and directed

Supply and fix inrepairs distribution board Loadline DBs are fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB) double door vertical SUITABLE FOR TP/FP ‘G FRAME’ MCCB complete all as specified and directed. Make: Havells Cat No DHDLVDRWGOFO08 or equivalent model in ABB/Scneider.

Supply and fix inrepairs MCCB 100 Amps fixed thermal fixed magnetic setting, 430 volts, 10KA, 3 pole complete all as specified and directed.

S & F in inrepairs of old u/s MCB SP of 06 to 32A,'C' curve, 10KA rupturing capacity all as specified and as directed.

S & F in inrepairs of old u/s MCB SPN of 06 to 32A,'C' curve, 10KA rupturing capacity all as specified and as directed.

S & F in inrepairs of old u/s MCB SP of 40A,'C' curve, 10KA rupturing capacity all as specified and as directed.

Supply and fixing inrepairs water heater storage type single phase 230 volt 25 ltrs capacity BEE 5 star rated and grouting 4 nos nut & bolts 90 mm long 12mm dia on wall for fixing including taking down existing geyser from site and deposit to MES store yard complete all as specified.

M & L for Earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip of size 25 x 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion all as specified

M/S Suresh Raju

OM CONSTRUCTIONS

SHREE HARI BUILDERS

B5BUILDING SOLUTIONS

S.R.V.Builders