Repair and Colour Washing of Govt. Girls Inter College Tehsil Powayan in Distt. Shahjahanpur. (Fin Year 2025-26)

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape raking out of joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground all complete as per direction of engneer in charge DSR NO 14.1.2

Steel work in built up tubular (round square or rectangular hollow tubes etc) trusses etc including cutting holsting fixing in position and applying a priming coat of approved steel primer including welding and bolted with specail shaped washers etc complete Hot finished welded type tubes DSR NO 10.16.1

Providing and fixing ISI marked flush door shutters conforming to IS 2202 (part 1) decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked stainless steel bult hinges with necessary screws DSR NO 9.20.1

Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm. DSR 9.51.1

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. DSR-11.39

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less then 50 gram/liter of approved manufacturer and of required shade and colour all complete to achieve even shade and colour DSR NO 13.41

Finishing walls with acrylic smooth exterior paint of required shade: New work (Two or more coat applied @1.67 ltr/10 sqm over and including priming coat of exterior primer applied@ 0.90 ltr/10 sqm) DSR NO 13.41.1

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade DSR NO 13.62.1

providing and fixing chlorinated polyvinyl chloride (C.PVC)pipes having thermalstability for hot &cold water supply including allcpvc plain &brass threaded fittings including fixing the pipe with clamps at1.00 m spacing this includes jointing of pipes &fitting with one step covc solvent cement and testing of joints complete as per direcition of engineer in charge internal work Exposed on Wall 15 mm dia. nominal bore DSR NO 18.8.1

providing and fixing chlorinated polyvinyl chloride (C.PVC)pipes having thermalstability for hot &cold water supply including allcpvc plain &brass threaded fittings including fixing the pipe with clamps at1.00 m spacing this includes jointing of pipes &fitting with one step covc solvent cement and testing of joints complete as per direcition of engineer in charge internal work Exposed on Wall 20 mm dia. nominal bore DSR NO 18.8.2

providing and fixing chlorinated polyvinyl chloride (C.PVC)pipes having thermalstability for hot &cold water supply including allcpvc plain &brass threaded fittings including fixing the pipe with clamps at1.00 m spacing this includes jointing of pipes &fitting with one step covc solvent cement and testing of joints complete as per direcition of engineer in charge internal work Exposed on Wall 25 mm dia. nominal bore DSR NO 18.8.3

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS:8931 15 mm nominal bore. DSR 18.50

Providing and fixing chlorinated polyvinyl chloride (C.PVC) pipes having thermalstability for hot &cold water supply including all cpvc plain &brass threaded fittings including fixing the pipe with clamps at1.00 m spacing this includes jointing of pipes &fitting with one step cpvc solvent cement and testing of joints complete as per direcition of engineer in charge external work DSR 18.9.9

Providing and fixing wash basin with ci brackets 15mm C.P. brass pillar taps 32mm C.P. brass waste of standred patteran including painting of fitting and brackets cutting and making goodthe walls wherever require white vitreous china surgeon type wash basin size 660*460 mm with a pair of 15mm c.p. brass pillar taps DSR 17.7.8

providing and fixing water closet squtting pan with 100 mm sand cast iron p or S trap 10 litre low lavel white P.V.C. flushing cistern including flush pipe with manually controlled device conforming to IS 7231 with all fitting and fixture complete including cutting and making goodthe walls and floors wherever required white viteous china orissa pattern W C pan size 580*440 mm with integral type foot rests DSR NO 17.1.1

Renewing glass panes with putty and nails wherever necessary including racing out the old putty float glasspanes of nominal thickness 5mm (weight not less than 12.5kg/sqm) DSR NO 14.5.2

Please Enable Macros to View BoQ information