CWE/P-80/2020-21 SPECIAL REPAIR TO BLDG NO P-58 (OR MD ACCN) OF CERTAIN UNIT AT MADHOPUR UNDER GE BASOLI

Amount

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed

M&L taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified & directed.

All as per item 05 here-in-before, exceeding 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed.

M&L rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L for screed bed or bedding layer 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed

M&L rendering 10mm thick rendering/screeding on fair faces of brick/concrete surface as in ceiling in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 350x250mmx7mm/ 450X300X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L 20mm thick granite (of approved type colour) work (table rubbed & polished) in jambs, pillars, window cills, cooking plateform, including grinding,polishing, rounding chamfering, edging and hole for gas pipe laid over and including 15mm thick cement screed (1:4) and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the colour of granite stone including cutting and moulding the edges, complete all as specified and directed.

M&L machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab all as specified and directed.

M&L for providing 50mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection/sub base as in floor complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 complete all as specified and directed

M&L Steel window factory made double shutter and tubular moulded frame of 16 gauge suitable for double shutter as per drg No CEPZ/TD/245/01 sheet 1/1 and CEPZ/TD/246/01 sheet 1/2 (double for mosquito proof one glazed with glazing bars and one gauged without glazing bars ) with side hung shutters including projecting type hinges non friction with 3mm thick 100mm long handle and two nos tower bolts 100mm long welded on 3.0mm thick MS plate to each window shutter and including hold fast and painting with one shop coat of zinc chrome primer complete all as specified and directed.

M&L mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 410-0 or Fe-310-0 including one coat of red oxide primer complete all as specified and directed .

M & L for pressed steel frames with one coat of red oxide primer 105 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate, including cement concrete type C-1, 1:3:6 (using 20 mm graded crushed stone aggregate) as in filling hollow of frame with plain cement concrete and hold fast after taaring of hollow portion of frame complete all as specified and directed

All as per item 20 here in before but size of frame size 165 x 60 mm complete all as specified and directed.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed

S&F factory made single piece solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified and directed

S&F 30 mm thick Factory made 2nd class hard wood shutter with top panel Glazed and skeleton open rebated and prepared to receive glass, gauze, etc.(without sash bars) fitted with cut and mitred beds for securing glass, etc. and bottom panel with panel of 9mm BWP commercial ply or 12 mm veneered particle board with comercial veneering on both faces. The sizes of rail and stile as per Is-1003 (Part-I) members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) all as specified and directed

M&L 18/19 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work (weight not less than 12 Kg/sqm) complete all as specified and directed.

M&L for factory made, 2nd class hard wood rail and style 35mm thick, palin framed, panelled shutters with loack rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia wire and average width of aperture 1.18mm mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F Extruded aluminium alloy handles fabricated type anodised and fixed, 150 mm size complete all as specified & directed

S&F mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified & directed

S&F 100mm size hasp and staple safety type aluminum anodized wit mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

M&L for 2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimeter each complete all as specified and directed.

S&F 300 mm ordinary rat tail rod pattern spring incl roller and roller plate (mild steel) complete all as specified and directed.

S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F peg set of Six mild steel complete all as specified and directed.

S&F aluminium tie hanger 350 mm long complete all as specified and directed.

S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges Brass chromium plated, fixed with rawl plugs complete all as specified and directed..

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L on new plastered surface two coats of distemper Oil emulsion over a coat of primer with wall care putty 2mm thick on walls including prepartion surfaces complete all as specified and directed.

M&L two coats of distemper Oil emulsion over a coat of primer with wall care putty 2mm thick on walls including prepartion of old treated surfaces complete removal of existing treatment complete all as specified and directed.

M&L for applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and directed.

M&L preparing old treated surfaces of wall (plastered or unplstered) for white washing and applying one coat of white wash complete all as specified and directed.

M&L two coats of cement base paint and including preparation of newly plastered surface complete all as specified and directed.

M&L two coat of cement base paint on old surfaces including preparation of surface complete all as specified and directed.

M&L Preparing of old steel and iron surfaces exceeding 10 cms width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Demolition brick tiles or terracing tiles, single layer on roof, complete all as specified and directed.

M&L roughening surfaces of old concrete surfaces by picking sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 Kg/Sqm complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed

M&L applying bituminous primer on roof surfaces conforming to IS-3384 of 1986 @ 0.30 ltr/Sqm and applying APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 160 gms/sqm) laid on primed surface by forced application complete all as specified with overlap of 10 cms (overlaps to be thermo fused by flame) complete all as specified and directed.

M&L PCC padding 1:2:4, type B-0, (using 12.5mm graded crushed stone aggregate) of uniform thickness 50mm in two layer with chicken wire mesh in between the layers, top surface of PCC padding shall be finished even & smooth w/o using extra cement complete all as specified and directed.

Supply only wire netting of galvansed steel wire 0.91 mm dia fixed with tinned tacks of wire staples and size of mesh 12mm X 12mm complete all as specified and directed.

M&L cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in mass-concrete complete all as specified and directed.

S&F in repair water closet (Squat pattern) vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & including trap set in and including cement concrete flush pipe).including connectoin to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S&F in repair water closet (Squat pattern) bedding vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe) including connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S&F PVC valve less symphonic action type flushing cistern 10 ltr capacity , low level white with inlet ball valve float and handle including connection to pipe fixed in repair complete all as specified and directed.

S&F only flush pipe of PVC 32 mm dia for low level cistern complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store bore of pipe 15mm complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store bore of pipe 20mm complete all as specified and directed.

M & L Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified and directed.

M & L Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified and directed.

M&L 15mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.

M&L 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.

S&F Stop valve/Angle valve, cast copper alloy chromium plated, fancy type, screwed down, high pressure with capstan head, screwed both ends for iron pipe or for unions of 15mm bore complete all as specified and directed.

S&F Stop valve, cast copper alloy screwed down, high pressure with capstan head, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions of 20mm bore and fixed in repairs, complete all as specified and directed.

S&F Bib taps , cast copper alloy, chromium plated with capstan head screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm and fixed in repairs, complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15mm complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore complete all as specified and directed.

S&F in repair Chromium plated brass shower rose with or without swivel joints, 125 mm size including fixing to steel pipe or union, complete all as specified and directed.

S&F sheet glass shelf assembly with 5.5mm thick and 12cm wide, sheet glass with chromium plated bracket guard and railing 60cm long fixed to wall with PUC plug and screw complete all as specified and directed

S&F in repair cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls 100mm dia, sand cast pipes complete all as specified and directed.

All as per item 74 here-in-before but except pipe, any type complete all as specified and directed.

S&F in repair cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls 75mm dia, sand cast pipes complete all as specified and directed.

All as per item 76 here-in-before but except pipe, any type complete all as specified and directed.

S&F in repair cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls, 50mm dia, sand cast pipes complete all as specified and directed.

All as per item 78 here-in-before but except pipe, any type complete all as specified and directed.

S&F in repair cast iron soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors, 100mm dia, sand cast pipes complete all as specified and directed.

All as per srl No 80 here-in-before but 75mm dia all complete all as specified and directed.

S&F in repair cast iron floor trap 75mm, with grating including jointing to waste pipe, fixed in cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) complete all as specified and directed.

S&F repair cast iron cowls 50 mm complete all as specified and directed.

S&F repair cast iron trap 'P' or 'S' 100 mm complete all as specified and directed.

S&F 100 mm dia Bends (any radius) diminishing pieces or tapers (large bore measured) complete all as specified and directed.

All as per srl item No 85 here-in-before but 75mm dia complete all as specified and directed.

S&F in repair 100mm dia Bends (any radius) with duck's foot or heel rest complete all as specified and directed.

S&F in repair Branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 100 dia, complete all as specified and directed.

S&F in repair Branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 75 dia, complete all as specified and directed.

Extra for CI fittings, if fitted withoval access doors for 100 dia complete all as specified and directed.

Extra for CI fittings, if fitted withoval access doors for 75 dia complete all as specified and directed.

Extra over cast iron pipe and fittings if lead joints is provided in lieu of cement joint 100mm complete all as specified and directed.

Extra over cast iron pipe and fittings if lead joints is provided in lieu of cement joint 75mm complete all as specified and directed.

S&F salt glazed stone ware gully traps, square or round mouthed, type 'P' of size 150 x 150 mm setting and jointing to drain with cement mortar 1:1 complete all as specified and directed.

S&F in repair PVC grating 100mm square/round of PTMT complete all as specified and directed.

S&F in repair sinks with drainage board made of steelness steel 1mm thick overall size 915mmx460mm bowl size 410mm x 330mm x 160mm for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar connecting union to pipe, GI waste Pipe 32mm from sink to nahni trap of approved brand including cost of materials, adhesive solution, including coupling and with a pair of suitable C.I. brackets including painting the brackets with two coats of approved paint cutting holes in walls and amking good the same etc complete all as specified and directed.

Dismantling water tank any type of capacity exceeding 250 litres but not exceeding 500 ltrs and removing to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with threaded closed top cover) hoisted and fixed in position all as specified in SSR Part I of capacity 500 litre complete all as specified and directed.

S&F in repair vitreous china white wash basins, angle back type of size 400mmx400mm including brackets, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe including brass chromium plated waste coupling with long screwed sank and fly nuts complete all as specified and directed.

M&L taking down eaves and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks etc including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall of bore 110mm complete all as specified and directed.

S&F PVC (SWR) bends any radius of bore 110mm complete all as specified and directed.

S&F plate rack of 1mm thick stainless steel, size 750mm x 750mm complete all as specified and directed.

M&L 40mm thick brick tiles bedded in cement mortar (1:6), 15mm thick and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.

All as per srl item No 105 here-in-before but except tiles.

M&L 75mm thick cement conc type C-2 1:3:6 (20mm graded crushed stone aggregate) complete all as specified and directed.

M&L chequered cement concrete coloured tiles 300 x 300 x 25mm thick,set jointed and pointed in neat cement slurry with grey cement and pigment complete all as specified and directed.

M&L taking down carefully copper/aluminium point wiring (any type) for light, fan, socket or power socket complete including fittings such as switches sockets, ceiling roses pendants, regulators, lamp holders, brackets, light fittings etc and make good the disturbed surfaces of wall/floor/ceiling etc. Complete all as specified as directed. Note : (a) All old material except fan and other items for which credit has mentioned in Sch 'A' part II shall be the property of the contractor after realisation of credit as per Sch of credit.

M & L Point wiring for light/fan/ bell point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkun boxes having thickness as specified 3mm ISI marked bakalite laminated sheet for switches and sockets, including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Unit rate include for cutting chases for conduits and sinking for voxes and making good to wall directed. (b) On RCC roof ceiling PVC conduit shall be provided on surface for fan with proper fixing clips all as directed.

All as per item No 110 but for one 3 pin 5 Amp socket outlet on independent board.

All as per item No 110 but for one 3 pin 5 Amp socket outlet on same board.

All as per item No 110 but for one light point controlled by 2-way switch.

All as per item No 110 but for one bell/buzzer point controlled by one push button.

M&L Point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkum boxes having thickness as specified 3mm bakalite laminated sheet ISI marked for one 3 pin socket outlet 15 Amp on independent board including 2.5sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green)

S & F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed

S & F Switch piano, flush type single pole, Two way 5 Amp complete all as specified and directed

S&F bell push flush type single pole one way 5 Amp complete all as specified and directed

S & F socket outlet 2 in 1, 3 pin 5 Amp flush type (Multi Purpose) complete all as specified and directed

S & F switch combination socket 3 pin, 15 Amps, flush type 240 Volts complete all as specified and directed

S & F Socket outlet 2 in 1, 3 pin 15 Amps, flush type 240 Volts complete all as specified and directed

S&F switch piano flush type single pole one way 15 Amp complete all as specified and directed

S&F ceiling rose surface bakelite 65x50mm, two to three terminal isolated body fixed on PVC round block complete all as specified and directed.

M&L for Lamp holder,PVC/ Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as specified and directed.

S&F in repalcement for fan regulator, 100 watt electronic flush type stepped (rotary type) with 5 steps speed control complete all as specified and directed.

S&F in repalcement for electric bell buzzer, ding dong AC single phase 220 volts, complete all as specified and directed.

S&F in replacement existing UNSV with decorative box type fitting 4 feet made of CRCA sheet long with blue coloured end caps for LED tube 1x18W LED including LED tube 4 feet long of 18W HPF>0.9, Surge protection>2.5, 100 lm/watt having bipin holder, connector block etc complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core complete all as specified and directed.

S&F in replacement existing UNSV with LED mirror fitting 1x8W, 230V, industrial box type, HPF>0.9, Surge protection>2.5, 100 lm/watt housing with reflector cover channel having bipin holder, connector block etc complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core complete all as specified and directed.

S&F MS exhaust Fan of cap 300mm sweep, 900 RPM, AC 240 volts having accessories such as copper wound fan motor, wings, louvers shutter complete including the fixing the same existing wall using 4 Nos 100mm x 75mm long steel fasteners and making connecting up with 0.5 sqmm three core flexible copper cable from ceiling rose to fan complete all as specified and directed.

S&F in repair for sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (multi strand) having normal area 6.0 Sqmm drawing into and including PVC non metallic rigid conduit medium grade of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor (green colour) and including non metallic medium grade rigid PVC conduit, including cutting chases in brick wall, and making good to match the existing specification complete all as specified and directed by Engineer-in-Charge complete all as specified and directed. Note :- (i) Rates are deemed to be included cutting and making holes in wall/floor for passing in or through conduit. (ii) Two run of 6.00 Sqmm single core (FRLS) PVC insulated copper conductor cable, one run of 6.00 Sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

M&L for Earthing complete with galvanized steel earth plate electrode 600cmx600cmx6mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level )with top edge of the plate not less than 1.5 Mtr below normal ground level connecting with galvanized iron GI earth wire 4mm dia by means of bolt nut check nuts and washers of galvanized iron and provision of GI tubing medium grade (ISI marked) of size 150mm for protection of GI earth wire upto test point, 20mm dia GI light grade watering pipe with funnel and wire mesh, RCC pit cover of size 300x300x40mm reinforced with XPM having weight not less than 4Kg/sqmm including 6mm thick MS bar handle made to shape, PCC pit with 1:3:6 type C1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, excavation , earth work in any type of soil, removal of excavated soil and returning filling in all as required at site complete all as specified in plate No 3 of SSR Part-I and all as specified or indicated including testing on completion complete all as specified and directed. Note:-Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, RCC cover, funnel with watering pipe, GI earth strip upto 7.5 m with protection pipe

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum.

BALKRISHAN GUPTA AND SONS

KALSI CONSTRUCTION CO

M/S DUGGAL CONSTRUCTION CO

M/S ONKAR SINGH PATHANIA