GE/U(N)-65/2019-20 REPAIR TO FLOORING JOINERY TOILET INCLUDING INTERNAL WATER SUPPLY UNDER AGE B/R-II OF GE (NORTH) UDHAMPUR

Amount

Demolition of cement concrete (un reinforced) in ground floor and paving n. exe 15 cm thickness (below or above ground level), complete all as specified and directed by Engineer-in-Charge.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided and removing the demolished material from the site to a distance n. exc 500M and depositing where directed by Engineer-in-Charge.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engineer-in-Charge.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each and removing from site complete all as specified and directed by Engineer-in-Charge.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5sqm but not exc 4 sqm each and removing from site complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, heart or wall tiling including Cement Mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engineer-in-Charge.

Dismantling of steel wondows of any description and fixed in any position including grill etc complete all as specified and directed

Dismantling Wall paneling and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connection, including cleaning for re-fixing or removal to store of size of pipe 15 mm bore laid on floor or wall, complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connection, including cleaning for re-fixing or removal to store of size of pipe 20 mm bore laid on floor or wall, complete all as specified and directed by Engineer-in-Charge.

Cement concrete (1:5:10) type E-2 (using 40mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

Providing Cement concrete (1:3:6) type C-0 (using 12.5mm graded stone aggregate) in filling pressed steel door frame/hold fast, complete all as specified and directed by Engineer-in-Charge.

4mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane, complete all specified and as directed by Engineer-in-Charge.

4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all specified and as directed by Engineer-in-Charge.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

Solid PVC Door frame of size 50mmx47mm made out of 5mm plain color PVC sheet reinforced with MS Square tube, supply and fixing in opening as per specification and drawings and incluiding making good disturbed surfaces complete all as specified and directed.

Solid PVC Wall Lining consisting of 5mm thick but wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawingas, complete all as specified and directed by Engineer In Charge.

35 mm thick 2nd class hard wood factory made plain framed, panelled shutter (three panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically presssure treated, complete all as specified and directed by Engineer In Charge.

35 mm thick 2nd class hard wood glazed and skeleton factory made shutters (three panel) open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I and fitted to chowkats, complete all as specified and directed by Engineer In Charge.

200mm long mild steel barrel tower bolt stove enamelled black with bright bolt, complete all as specified and directed by Engineer-in-Charge.

300mm long mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engineer In Charge.

100mm size butt hinges, medium weight cold rolled mild steel, complete all as specified and directed by Engineer In Charge.

Mild steel pressed handles, oval type, stove enamelled black 150 mm length, ISI marked, complete all as specified and directed by Engineer In Charge.

Mild steel 300 long ordinary rat rail rod pattern spring including roller and roller plate, complete all as specified and directed by Engineer In Charge.

150mm long aluminium anodised, barrel tower bolts extruded section, complete all as specified and directed by Engineer-in-Charge.

150 mm long Aluminium handle, complete all as specified and directed by Engineer-in-Charge.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm, complete all specified and as directed by Engineer-in-Charge.

Steel windows with side hung shutters including box type hinges, steel handle, mild steel ISI marked tower bolt 100 mm size (minimum 2 for each shutter), and steel peg stay, complete with glazing bars, dovetailed or welded with one shop coat of zinc chromate primer, complete all as specified and directed by Engineer-in-Charge.

Steel windows with side hung shutters including box type hinges, steel handle, mild steel ISI marked tower bolt 100 mm size (minimum 2 for each shutter), and steel peg stay, complete without glazing bars, dovetailed or welded with one shop coat of zinc chromate primer, complete all as specified and directed by Engineer-in-Charge.

Steel windows and ventelators, fixed type, with glazing bars, including painting with one shop coat of zinc chromate primer, complete all as specified and directed by Engineer-in-Charg

Aluminium window air tight of anodised frame made of size 100mm x 45mm of section thickness-1.50mm thick and shutter stiles made of section 80mm X 45mm X 1.5mm thick with or without rebates, with 5.5mm thick tinted glass fixed with aluminium beads, including necessary jointing cleats/anodised aluminium fillets/aluminium glazing clips with rubber gasket, with aluminium fittings such as alumnium butt hinges 100mm long 03 Nos, aluminium anodised tower bolt 100mm long 02 Nos, aluminium anodised bow handles 100mm 01 No, aluminium hook and eye 150mm 01 No in each shutter including aluminium grill of 5 to 6 dia, size of mesh not exc 7.5cm in either direction, as approved by GE, complete all as specified and as directed by Engr-in-Charge. Note : All fittiang shall be of ISI marked except cleats) sizes of each shutter shall be as per site requirement

Aluminium door air tight powder coated frame made of size 100mm x 45mm of sheet thickness 1.5mm with one or more rebate including jointing cleats hinges etc for fixing anodized aluminium door shutter fully paneled) two Nos of panels on each shutter with 5.5mm thick tinted plain glass, shutter rail made of 80 x 45mm of sheet thickness 1.5mm ( top bottom, middle and side rail) single/double leaf side hung type including necessary joint cleats anodized aluminium including aluminium fittings such as aluminium butt hinges 100mm long 4 No on each shutter, aluminium anodized tower bolt 200mm long 3 Nos for each door, aluminium anodized handle 150mm 2 Nos D type of each. Shutter with & including locking arrangement with lock 6 lever of Make Harrison one on each door, bottom fittings door spring on each shutter including hydraulic door closer. All door fitting except cleat shall be ISI marked ( size of each door shall be as per site requirement), complete all as specified and as directed by Engr-in-Charge. Make of Aluminium sections : Jindal/Hindalco/makes specified in PS

Pressed steel frames, conforming to IS, having profile 105 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc., complete, as specified, supplied and fixed with one shop coat of zinc chromate primer, complete all as specified and directed by Engineer-in-Charge.

Pressed steel frames, conforming to IS, having profile 125 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc., complete, as specified, supplied and fixed with one shop coat of zinc chromate primer, complete all as specified and directed by Engineer-in-Charge.

Mild steel conforming to Fe-290 Gde E-165 Framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters,walk ways, railings and similar work, complete all as specified and directed by Engineer-in-Charge.

25 mm thick, cement concrete type B-1, 1:2:4 using 20 mm graded crushed stone aggregate, as in flooring, complete all as specified and directed by Engineer-in-Charge.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid and fixed to using spacers in floors etc. and jointed in neat cement slurry and pointed in epoxy tile grout to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete, complete all as specified and directed by Engineer-in-Charge.

Vitrified ceramic light shade coloured tiles 9-10mm thick (Square/rectangular) polished area of each tiles size 600x600mm laid in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed 15mm thick in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge

Glazed ceramic tiles size 450 mm x 300 mm x 7to8mm thick on vertical surfaces such as skirting /dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing coat complete all as specified and directed by Engineer-in-Charge.

Marble slab (any type and any shade)16-18mm thick, as in shelves, cooking plateforms etc. bedded jointed and pointed with white cement slurry includding cutting & polishing and including dismantling of existing marble including cement mortar bedding (but not backing) & rubbish off the premises and including screed bed 20mm thick in cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge

15mm thick rendering on fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.

Preparing of new plastered or un-decorated walls surfaces and applying two coat of oil bound distemper over including one coat of 1 to 1.20mm thick wall care putty, complete all as specified and directed by Engr-in-charge.

Preparation of new wooden or untreated wood surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primert, complete all as specified and directed by Engineer In Charge

Two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

15 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) incl cutting chases for concealed work (where ever required), complete all as specified and as directed by Engr-in-Charge.

All as per Serial Item 45 here-in-before but except tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item)

All as per Serial Item 45 here-in-before but 20mm bore of pipe and except tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item).

Chromium plated, bright finish,Tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed in repair, complete all as specified and directed by Engineer-in-Charge.

Shower rose, brass, chromium plated, 125mm dia with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union fixed in repair, complete all as specified and directed by Engineer-in-Charge.

Bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repair, complete all as specified and directed by Engineer-in-Charge.

15 mm bore Stop valves, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure, with capstan head handle, screwed both ends for iron pipe or for unions fixed in repair, complete all as specified and directed by Engineer-in-Charge.

Vitreous china wash hand basin white, flat back of size 580mmx450mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe,15mm Pillar cock and waste fitting etc fixed in repair , complete all as specified and directed by Engineer-in-Charge.

Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' CI trap, lime concrete bedding and making good existing floor (excluding flushing cistern and flush pipe) fixed in repair, complete all as specified and directed by Engineer-in-Charge.

Vitreous china wash down water closet pedestal pattern white, (excluding flushing cistern and flush pipe) with 100mm CI ‘P’ or ‘S’ trap including sheet cover close pattern with flat bottom, CP jet and connection to trap and to flushing pipe etc fixed in repair , complete all as specified and directed by Engineer-in-Charge.

10 ltrs PVC flushing cistern low level (white) with inlet, ball valve float and handle including PVC Connection and 32mm dia PVC long bend for squar pattern etc. set with concrete and making good to floor including taking down, complete all as specified and as directed by Engr-in-Charge.

110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls fixed in repair, complete all as specified and directed by Engineer-in-Charge.

75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls fixed in repair, complete all as specified and directed by Engineer-in-Charge.

PVC (SWR) bends any radius of bore 110 mm fixed in repair, complete all as specified and directed by Engineer-in-Charge.

110 mm PVC (SWR) branch piece, single (Single Y) equal or unequal fixed in repair, complete all as specified and directed by Engineer-in-Charge.

PVC (SWR) bends any radius of bore 75 mm fixed in repair, complete all as specified and directed by Engineer-in-Charge.

75 mm bore PVC (SWR) floor trap plain with grating incl. jointing with solvent cement fixed in repair, complete all as specified and directed by Engineer-in-Charge.

Vitreous china urinal, half stall type white (exluding flushing cistern, flush pipe) complete including PVC waste pipe, providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and including spreader fixed in repair, complete all as specified as directed by Engr-in-Charge.

Treatment of sunken floor surfaces with 0.488 kg/Sqm first layer of slurry of cement mixed with acrylic based polymer modified cementitious composite compound @0.253 Kg/Sqm. This layer shall be allowed to be cured for 4 hours and then applying in second layer slurry of cement @ 0.242 Kg /Sqm mixed with acrylic based polymer based modified cementitiousc composite compound @0.126 Kg/Sqm. This layer shall be allowed to be cured for 4 hours

M/s Koul & Sons

KALSOTRA CONSTRUCTION CO