Fabrication, providing, fitting and lowering of B class column pipes and SITC of MUG 20 starter at water supply scheme Udaipora under M and E Non Plan, Panzgam.

Amount

Fabrication, providing, fitting and lowering B Class column pipe conforming to IS: 1239 of length 10 Rft into the 200 mm casing dia. production well upto the desired depth; The job includes Providing and welding of flanges conforming to IS: 6392, Table-17 and PN 16 to these pipes and welding of flanges in two layers to make the flanged joint strong and leak proof. The pipe of 10 ft length is to be weld on both sides with flanges using welding rod of reputed make. The job includes all types of skilled labours, arrangement of power supply/ diesel Generator set etc required for the job including P/F of suitable size nuts bolts and R.I Gasket in the flanged joints of column pipes. The job further includes cutting of 2 No. rectangular cable slots in each flange.The dia of pipe is 65 MM.

Providing, Fitting of Submersible Motor starter: Fully automatic submersible motor starters. Rating = Mug 20 HP Power Specs = 3 Ф, 415 + 15% V, 50 + 3 % Hz. Relay range = 30-50 A. Protection = Under voltage/ over Voltage /reverse Qty = 01 No.

Fabrication, providing and fitting of split type MS clamps10 mm thick, 2 ft long and 3 inch wide for lowering and holding of pumping unit fitted. The job includes the cost of required size of nuts and bolts.

Providing and fitting of 3-Core flat 10 square mm submersible copper cable conforming to IS: 694 (Part 1st) – 1964 & IS: 694 (Part 2nd) - 1964 for Submersible Pumping Unit and other electrical Equipments . The cable connections terminal shall be fitted with copper thimbles of required size. :

Shifting of damaged/wornount colum pipe from WSS to sub-divisional store at Reshwani

Mushtaq Enterprises