Internal Electrification works for operator room and installation of LT panel for Solid Waste Convector at Patnitop

Amount

Wiring for light point/Fan point/Exhaust fan point/call bell point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cables in surface/recessed PVC conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cables etc as required (ISI).

Wiring for circuit/sub main wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required,(Anchor/havels,Vguard make) complete job.

2X2.5 Sq.mm cu + 1X2.5 Sq.mm earth wire.

2X4 Sq.mm cu + 1X4 Sq.mm earth wire.

Supplying and fixing following modular switch/socket on existing modular plate and switch box including connections but excluding plate etc as required.

a) 5/6 amp Switch

b) 3 pin 5/6 amp socket.

c) 15/16 amp switch.

d) 15/16amp socket.

Supplying and fixing following size/ modules, GI box along with modular base and cover plate for modular switch in recess etc as required.

a) 6 Module(200mmX75mm).

b) 3 Module(100mmX75mm).

c) 4 Module(125mmX75mm)

Supplying of shutter type exhaust fan 300mm of Crompton greaves/bajaj/havels make.

Installation of exhaust fan in the esisting opening including making goods the damage,connection, commissioning etc as required upto 450mm sweep.

Supplying and fixing of LED blub 9 watt. (Panasonic, havels, bajaj make)

Supplying , laying, testing and commissioning of 10sqmm 2 core 1.1KV rating PVC insulated PVC sheathed armoured aluminium cable recessed/surface complete job (havels, polycab make)

Supplying and fixing of PVC board for holders including connection etc as required.

Supplying and fixing 5 amp to 32 amp rating 240/415 volts 10 KA, “ C” curve, miniature circuit breaker suitable for inductive load of following pole in existing MCB DB complete with connection, testing and commissioning etc as required.(Make: Havels/ABB/Schneider/Siemens)

a) Single pole.

b)Single pole and neutral

Supplying and fixing following way, single pole and neutral ,sheet,MCB distribution board, 240 volt on surface/recess, complete with tinned copper busbar copper busbar, neutral busbar,earth bar,din bar detachable gland plate ,interconnections phosphatised and powder painted including earthing etc as required (but without MCB/RCCB/isolator)

a) 6 way double door.

Supplying,installation ,testing and commissioning of 90 watt LED.(make:-Crompton ,wipro, bajaj) .

Supplying and laying of following size DWC-HDPE pipe ISI marked along with all accessories like socket, bends, couplers, etc. conforming to IS 14930,Part ll complete with fitting and cutting ,jointing etc. direct in ground (75cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required. A) 63 mm Dia (OD-63mm & ID-51 mm nominal)

Supplying ,laying ,testing and commissioning of 10sqmm 2 core PVC flate cable with aluminium conductor for working voltage up to 1.1 kv complete job (ISI).

Supplying and fixing of angle PVC Batten/angle holder including connection etc as required.

Supplying and fixing of PVC batten complete job.

Supply, installation, testing and commissioning of outdoor type cubical weather proof feeder LT panel 1.6mm thick painted from inside and outside providing complete protection from water moisture, dust vermin proof and wired. The panel will consist of MCCB 200 amp F P 18KA with overload and short circuit. 01 Nos ( make ABB/L&T/SEIMENS).

METERING AND INDICATION

CTs 200/5A (1 set of 3Nos)(Make REPUTED)

LED RYB (1 set of 3Nos)(Make REPUTED)

ALMUNIUM BUSBAR

High conductive electrolytic grade aluminium busbar of 240 amp,TPN, with heat shrinkable sleeve,duly colour coded ( Make Jindal/Handalco).

OUTGOING

MCCB 3P 10KA with overload and short circuit (Make ABB/L&T). 02 Nos.

Providing of Earthing with G.I earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. With charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I Wire in 15 mm dia G.I pipe from earth electrode including connection with G.I thimble excavation and re-filling as required.

Supplying and fixing of 50 mm dia X 2.00 meters long G.I pipe (medium class) bracket for mounting of fluorescent /HPMV /LED street light fitting on pole including bending the pipe to the required shape, 2 Nos 40 mm X3 mm iron clamps with nuts, bolts and washer, painting the iron clamps with primer and finish paints etc. As required.

DUTTA ELECTRICAL

shakeel ahmed sheikh

M/s Shakeel Ahmed