Supply, installation and commissioning of Hot Dip Galvanizing Plant for CFC Engineering Cluster at Indranipatna, Choudwar, Cuttack, Odisha.

Amount

STEP Smart Pulse fired High Velocity Furnace ▪ To suit a kettle size = 10.0 m x 1.0 m x 1.2 m deep ▪ Fully Automatic Burner Management System ▪ Burner- 2 Qty HV 300-Hotwork Bloom (Down-rated) ▪ Fuel = (LPG / NG) ▪ Designed Capacity – 2.5 ton/hour ▪ Working Capacity – 2.0 ton/hour ▪ Control panel and instrumentations As per our specifications given in Annex- A

Design, Supply , Installation for Zinc Kettle (INDIAN MAKE) ▪ To suit a Kettle size = 10.0 m x 1.0 m x 1.2 m deep X 50 mm thick

Recirculating Hot Air Dryer - Two Station ▪ Size - Length 10.7 meter X wide 4.1 meter ▪ Designed for on circulation pattern of air in a straight, cross-airflow chamber ▪ The dryer creates heat within the chamber at temperature varying between 80 to 100 ▪ High-powered fan circulates air through the dryer’s plenum space. ▪ Metal push button stations ▪ Automatic temperature control through PLC

Degreasing Tank (P.P. Tanks) ▪ Tank size = 10.5 m x 1.0 m x 1.2 m deep ▪ PP = 20mm thk; PP-CP (Indian) ▪ Outlet connection with a PP ball valve As per our specifications given in Annex- D

HCL Acid Pickling tanks(P.P. Tanks) ▪ Tank size = 10.5 m x 1.0 m x 1.2 m deep ▪ PP = 20mm thk; PP-CP (Indian) ▪ Outlet connection with a PP ball valve

HCL Acid Pickling tanks(P.P. Tanks) ▪ Tank size = 12.0 m x 1.0 m x 1.2 m deep ▪ PP = 20mm thk; PP-CP (Indian) ▪ Outlet connection with a PP ball valve

Rinse tanks (P.P. Tanks) ▪ Tank size = 10.5 m x 1.0 m x 1.2 m deep ▪ PP = 20mm thk; PP-CP (Indian) ▪ Outlet connection with a PP ball valve

Flux Tank with Perforated plate (P.P. Tanks) ▪ Tank size = 10.5 m x 1.0 m / 1.2 m x 1.2 m deep ▪ PP = 20mm thk; PP-H (Rochling, German) ▪ Outlet connection with a PP ball valve

Zinc Fume Extraction System ▪ Blower = 60 HP: 16000 CFM ▪ Casing coated with FRP (inside & outside) ▪ PP Scrubber with PP FRP Chimney ▪ Control panel equipped with VFD

Acid Fume Extraction System ▪ Blower = 100 HP; 40000 CFM ▪ Casing coated with FRP (inside & outside) ▪ PP Scrubber with PP FRP Chimney ▪ Control panel equipped with VFD

Flux Heating System ▪ Complete with SS 316L material heat exchanger ▪ Temperature Controller, thermocouple etc.

Quench & Passivation Tanks ▪ Tank size = 10.5 m x 1.0 m x 1.2 m deep ▪ Tank made of mild steel complete with top plate, outlet connection etc.

Electric Cable & Accessories for All Panels to Equipment

Piping flux tank to Quenching Tank

Chimney Anchor bolts

Work Jigs - To suite kettle size

Exhaust Stack with Damper ▪ 30 Meter High ▪ Double Flange Template for Chimney base casting

Jig Lifting Tackle

Insulated Kettle cover ▪ Coated with heat resistance paint to suite kettle size - 10.0 m (L) X 1.0 m (W)

Dross Shovel

Loading / Unloading stands

Filling stations

Ash Bucket

Ash Collect tray

Skimming Wipers

Ash Mixing Tool

Ash Lifting Tool

Purging Tool

Kettle Scrapping Tool

Wipping Tool

Furnace floor plates with steel structure

Acid Storage Tanks 20 kL

Gas Station or Fuel storage facilities Capacity 2 tons

Acid Pump & Pipe Work

All piping material, valves with fittings

Water pump and piping & instrumentation up to flux heating coil inlet

DG Set 100 KVA

Laboratory Equipments & testing apparatus

Casting of base refractory at site for Furnace

Duct Cover Plates

Fire Brick Lining & Fibre insulation from exhaust duct to dryer re-circulation fan

Acid Proof Tiling in dryer 45 sq. Meter

Acid Proof Tiling Pre-treatment Pit 250 sq. Meter

ETP Plant

EOT overhead Cranes

Supply, Installaiton, Testing and commissioning of 500 KV electrical substation, Electrical wiring at site up to the control panels

Main Panel Board, Cables, LDBs, Earthing, Cable Trays & Junction Box for plant

Ladder/ scaffolding /compressed air / Valve from Water source to Tank / wiring and laying / Storage space for tools /Ladder & safety equipment / long boom hydra/ pallet truck

All Foundation work

Civil Engineering ( Design and Construction )

RCC Foundation of Dryer pit

Supply & Installation of LED lighting for Shed works

AIR COMPRESSOR SYSTEM CCOMPLETE SET Name: GA30 P A 10.5 Air Compressor Motor Rating: 30.00 KW Capacity: 179.78 cfm Max Working Pressure: 10.5 bar Technology: Oil Injected Rotary Screw Compressor Sound Level: 73 dbA Power Supply: 400 V ± 10% - 3Ph - 50 Hz ± 5% Volt-Ph-Hz

Transportation, Installatin, Testing & Commissioning

M/s. EASTERN ENGINEERING