Construction of cuddapah shelves and vehicle shed roof in MRT office UPVC windows and allied civil works in circle office at EEDC Erode

Amount

3.0 Tn Mega Split Units

Installation charges for Mega split units

Copper pipes with insulation and communication cable for indoor to outdoor units

Readymade stand for outdoor units

PVC Drain pipe with insulation for indoor units

Earth work excavating and depositing on bank with initial lead of 10m and initial lift of 2m in hard stiff clay. Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders, as per standard specification, etc., complete.

Earth work excavating and depositing on bank with initial lead of 10m and initial llift of 2.0m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blasting, as per standard specification, etc., complete.

Filling with M- sand for filling the foundation and floor including M-sand, filling charges, with all leads and lifts, watering, consolidation etc., complete.

Plain cement concrete in CC 1:4:8, using 40mm HBG metal including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Random rubble masonry in C.M.1:6 for foundation and basement including cost of all materials, lead, lifts, labour and curing charges etc., complete.

Cement Solid Block in CM 1:5 using 15 cm cement Solid block for super structure and manhole including cost of all materials, labour charges, curing,scaffolding charges all leads and lifts etc., complete and as directed by Engineer.

Plastering with CM 1:5,12 mm including cost of cement for Inner/Outer walls including labour, curing, all leads and lifts etc., complete as per standard specification.

Supplying & fixing of cuddapah slab polished both sides for cup-Board, 20mm thick including all materials, lead, lift and fixing in position etc., complete.

Colour washing with two coats using ready mixed Exterior/ Interior Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of exterior/ Interior emulsion water based primer exterior /Interior surfaces with three coats of putty including through scrapping, clean removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete and including necessary crack filling paste, putty wherever required.

Supplying and fixing of 8mm thick plywood on the table top and finished with Mica Sheet including fixing of Teak wood beading alround the table and replacement of pad lock, labour wrought and putup position shutters for drawers, removing old paint from the JC Table, painting with approved varnish two coats including cost of all materials, labour charges, all leads and lifts etc., complete.

Supplying and fixing of 8mm thick plywood on the Half Bench top and finished with Mica Sheet including fixing of Teak wood beading alround the Bench and removing old paint from the Half Bench, painting with approved varnish two coats including cost of all materials, labour charges, all leads and lifts etc., complete.

Supplying and fixing of Teak wood New drawers and pad lock, labour wrought and putup position shutters for drawers, painting with approved varnish two coats including cost of all materials, labour charges, all leads and lifts etc., complete.

Supplying and fixing of plain glass 12mm thick over the table with edge polish four sides including cost of all materials, labour charges, all leads and lifts etc., complete.

Supplying and fixing of Screen clothes including cost of screen cloth, stitching charges, etc., complete as directed by Engineer at site.

Labour charges for dismantling the Wooden computer table and alteration including labour wrought and put up position shutters for computer table including labour charges for furniture fittings complying standard specification, labour charges, leads, lifts, etc., complete.

Supplying and fixing of door inner lock approved good quality lock of reputed make including cost of all materials, labour, lead, lift, as per standard specification etc complete.

Manufacturing,Supplying and Fixing of Stainless Steel door for steps area using outer squar pipe of size40x40 mm thick and 25mmdia intermediate horizontal Stainless Steel pipe. The rate is inclusive of the charges for cutting,bending, welding, grinding, polishing, conveyance chrges,etc.complete.

Dismantling the existing ACC Sheet roofing using Steel purloins and rafters labour, cost minor T&P's lead, lift ete.,complete.

Brick work in C.M. 1:5 using class II chamber burnt bricks for super structure including, cost of cement, all materials, labour, curing, all leads and lifts, as per standard specification, etc., complete.

Plastering with CM 1:5,12 mm including cost of cement for Inner/Outer walls including labour, curing, all leads and lifts etc., complete as per standard specification.

Supplying and fixing of 8mm thick plywood on the wooden stool top and finished with Mica Sheet including fixing of Teak wood beading alround the Stool and removing old paint from the Stool, painting with approved varnish two coats including cost of all materials, labour charges, all leads and lifts etc., complete.

Design and Fabricating,Supplying and fixing of roof truss (Rectucular pipe) for vertical and horizontal supports and painting with one coats of red oxide primer and two coats of enamel paint ,including cost of all materials, labour lead,lift etc complete.

supplying and fixing of sheet using PPGI sheetof 0.44 mm thick powder coated roll forming profile with designed sheets for roof including cost of material, labour lead,lift etc complete.

White washing two coats using white cement (First quality - Apex or its equivalent) of approved quality including through scrapping, clean removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete.

Painting the existing steel door with two coat of approved enamel paint over a existing painting including cost of scrapping all materials, labour, leads, lifts,etc., complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm X 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allolw leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.

Providing and fixing of UPVC (Unplasticized polyvinyl chloride) fixed ventilator section for vertical, Botom and Top section for UPVC main frame work vertical and horizontally fixed to the wall with clamps and screws. Thefixed window will be a glass 4mm thick plain float glass in the portion including the cost of snap on clips rubber gaskets etc., complete.

Supplying and fixing of 8mm thick plywood on the wooden stool top and finished with Mica Sheet including fixing of Teak wood beading alround the Stool and removing old paint from the Stool, painting with approved varnish two coats including cost of all materials, labour charges, all leads and lifts etc., complete.

SGST For bidders within Tamilnadu

CGST For Bidders within Tamilnadu

IGST For Bidders outside of Tamilnadu