SPL REPAIR OF BLDG NO -111 OF PINE OFFRS MESS GUEST ROOM, PROVN OF BOUNDARY WALL AT PASCHIM VIHAR OFFR MD COLONY AND PROVN OF TOILET IN JCO LIVING BLDG NO P-280 OF 49 INF BDE CAMP UNDER AGE B/R-III OF GE (SOUTH) MEERUT

Amount

M&L for double charged vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles exc 0.42 sqm but nexc 1.00 sqm, in floors set and joined in neat cement slurry and pointed in white or coloured cement to match the matrix/shade of tile and laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes incl dismantling of old unserviceable floor tiles. Complete all as specified and directed

M&L for double charged vetrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles exc 0.42 sqm but nexc 1.00 sqm, in skirting/dado set and joined in neat cement slurry and pointed in white or .coloured cement to match the matrix/shade of fileand laid over and including 10mm thick in cement mortar 1:4 screed bed for skirting/dados incl dismantling of old unserviceable tiles. Complete all as specified and directed

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement laid over and including 15mm thick screed in CM(1:6) incl dismantling of old unserviceable tiles. Complete all as specified and directed.

M&L Coloured Glazed ceramic tiles on vertical surfaces of 350x250mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement laid over & including 10mm thick plaster in cement mortar 1:4 on fair face of brick or concrete surface incl dismanting of old unserviceable tiles. Complete all as specified and directed by Engineer-in-charge.

Taking down old existing water proofing treament from the top of RCC/arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises. Complete all as specified and directed.

FIVE Course Water Profing Treatment:- M&L for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30 kg/sqm followed by applying evenly a tack coat @ 1.20kg/sqm using 85/25 grade industrial hot blown bitumen, over it laid with 3mm thick APP modified polymeric water proofing membrane of weight not less than 3.6 kg/sqm reinforced with non-woven polyster fabric (weight not less than 160 gm/sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufcturers instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.20kg/sqm and finally finished the top with polymeric water proofing membrane with a coat of bitumen aluminium paint @ 0.20kg/sqm as per manufacturers instructions. Complete all as specified and directed. Note:- Water proofing treatment work shall be done with manufacteres authorised applicater only under strict supervisin of manufacturer technical representative.

M&L 20mm thick screed bed in cement mortar 1:4 on roof surfaces mixed with water proofing compound @ 200ml per 50 Kg of cement consumed. Complete all as specified and dirtected. (Note- water proofing compound shall be measured and paid separately).

Supply only liquid water proofing compound complete all as specified and directed.

M&L for providing cement concrete 1:2:4 Type B 1 (using 20 mm graded crushed stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs hold fast water troughs, filling in pressed steel door frame and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

S&F GI frame work for seamless ceiling suspension system comprising of GI perimeter channel including hangers 6mm dia (upto 1200mm length) adjusting level fixed to roof slabs fasteners 12.5mm dia, 40mm long complete all as specified incl 12mm thick gyproc borading (gysum board) of size 1800x1200mm impregnated with the water proofing paper. Make-saint gobain/armstrong/Hilux/gypboard or equivalent fixed to the ceiling section with 25mm long self drilling & tapping screws having phillips head with under head cutter at 200mm C/C including finishing the joint of face board with specially formukated jointing compound & 48 mm wide fibre tape (Note: Design/pattern shall be approved by GE at the time of execution).

S&F hard drawn steel wire fabric, of square mesh cut to lengths, bent to shape rquired as in wood or steel members having weight exceeding 4kg/sqm. Complete all as specified and directed.

S&F Fe 290 (Gde E-165) MS Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated). Complete all as specified and directed.

S&F hollow PVC wall lining consiting of 5mm thick plain wood grain printed/coloured PVC sheet inclusive of solvent cement and fixing at site on PVC frame and incl PVC corner as per specification and drawing incl dismnatling of old wall lining. Complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exc. 1.5 sqm but not exc. 4 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

S&F factory made single/double extruded WPC (wood polymer composite) solid door frames of chokhat of size 65x125mm comprising of virgin PVC Poymer of K VALUE 58-60 (Suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC aolvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (edge), minimum compressive strength of 58 N/mm², moduiles of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge.

S&F factory made 30mm thick soild flush door plain/pre-laminated WPC (wood polymer composite) moulded shutter should be 10mm deep on the front face of board with different design and other side plain required size comprising of virgin WPC resin of K value 57-60(suspended grade) calcium carbonate and natural fibres (wood/powders/rice husk/wheat husk) and nontoxic additives made from extrusion process WPC foam sheet single extruded (inner) with density not less 600 kg/cbm, having good screw holding capacity (screw withdrawal strengthof 2000N (face) & 100N (edge), minimum compressive strength of 50 N/mm², modulus of elasticity 850 N/mm² and resistance of spread of flame of class A category with property of being termite/borer free. Water/moisture proof, fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws. Including mortice lock, tower bolt, handle and door stopper etc. The design and fittings approved by Engr-in-charge. Complete all as specified and directed.

S&F 30mm thick factory made solid WPC (wood polymer composite) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture, including SS wire mesh shall be fixed with 15x15 square tube in side rails with screwed 8x28 heat metal zink coated screws can be remove or fix again after changing of wiremesh when needed. The density shall be as per manufacure instruction. Including mortice lock, tower bolt, handle and door stopper etc. The design and fittings approved by Engr-in-charge. Complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exc. 1.5 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

S&F factory made UPVC white colour three track panels sliding window with fly proof SS wiremesh (two nos glazed & one number wiremesh panels) frame 116x45mm & sash 46x62mm both having wall thickness of 2.3±0.2mm and single glazing bead/double glazing bead of appropriate dimension. (Area of windows/ventilator as per site requirements) comprising of UPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ±0.2mm thick galvanised mild steel UPVC profile) appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon and incl 4mm thick glass for window and SS wiremesh for winodw & ventilator and 4mm thick frosted glass for ventilator. Complete all as specified and directed.

S&F aluminium door/ window/ventilator/partition/ shutters/bath cubicles, made out of extruded power coated aluminium sections weighing 0.55kg/m, with sliding or openable shutters including frame and necessary joining cleats, glazing clips, rubber packing, power coated aluminium snap beading, screws etc. Complete and also including the following powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hook & eyes, peg stay, handles. channel with wheel for bath cubicles connected items wtih 8-10mm thick tinted glass for door/bath cubicles, taking down the exsiting. Complete all as specified and directed. Notes:- (i) Minimum thickness of powder coating shall be 15 micron for widows and 25 microns for doors. (ii) Design of door, window and ventilator shutters and sections to be used in their fabrications shall be as approved by the Engineer-in-Charge/GE.

Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed.

M&L 18mm to 20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms, door cills, wash basn top and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15 mm thick Screed bed in cement mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. Complete all as specified and directed.

M&L for rendering 20 mm thick in cement mortar (1:4), in two coats (15 thick backing coat +5mm thick finishing coat) on fair faces of brick work or concrete surfaces, finished the surfaces even and fair mixed with water proofing compound @ 200ml per 50 kg of cement consumed complete all as specified and directed Note :- Water proofing compound shall be measured and paid separetely under "Supply Only" item of Sch 'A'.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick works or concrete surfaces, finished the surfaces even & smooth without using extra cement, complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:4) on concrete surfaces such as chajjas/roof projection/facia, finished the surfaces even and smooth mixed with integral water proofing compound @ 200ml per 50 kg of cement consumed complete all as specified and directed. Note :- Water proofing compound shall be measured and paid separetely under "Supply Only" item of Sch 'A'.

M & L rendering 5mm thick in CM 1:3 on concrete sufaces as in ceiling finished even and smooth without using extra cement all as specified and directed.

M&L for complete removal of exisitng treatment on external wall surfaces by sanding machine or any other mechanical means thereafter washing, rubbing down the surface, in order to remove dust, dirt, loose particles etc and fill the visible cracks/joints with crack seal caulking compound after cleaning the surface by clean water. Applying a coat of primer (water based primer) and allow to dry for six hours. Thereafter apply two coats of exterior grade weather proof acrylic emulsion paint. Complete all as specified and manufactures instruction and directed by Engr-in-charge. (Note- The acrylic paint shall be applied by mechanically airless paint sprayer machine only and throgh applicator.)

M&L for treatment on new plasterd surface wall on external surfaces by sanding machine or any other mechanical means thereafter washing, rubbing down the surface, in order to remove dust, dirt, loose particles etc and fill the visible cracks/joints with crack seal caulking compound after cleaning the surface by clean water. Applying a coat of primer (water based primer) and allow to dry for six hours. Thereafter apply two coats of exterior grade weather proof acrylic emulsion paint. Complete all as specified and manufactures instruction and directed by Engr-in-charge. (Note- The acrylic paint shall be applied by mechanically airless paint sprayer machine only and throgh applicator.)

M&L preparation old plastered surfaces of wall including complete removal of existing treatment and applying two coat of oil bound distemper over and including 1mm thick wall care putty. Complete all as specified and directed.

M&L preparation new plastered surfaces of wall and applying two coat of oil bound distemper over and including 1mm thick wall care putty. Complete all as specified and directed.

M&L preparation old plastered surfaces of ceiling including complete removal of existing treatment and applying two coat of oil bound distemper over and including 1mm thick wall care putty. Complete all as specified and directed.

M&L preparation new plastered surfaces of ceiling and applying two coat of oil bound distemper over and including 1mm thick wall care putty. Complete all as specified and directed.

S&F in repair one piece closet S trap size (690x375x785)mm with integrated cistern, seat cover and twin flush fittings. Complete all as specified and directed.

S&F in repair square trap flat sloated grating with frame size (150x150)mm. Complete all as specified and directed.

S&F in repair wall mixer 3 in 1 for over head shower and hand shower. Complete all as specified and directed.

S&F in repair 150mm (6") overhead square ABS shower full chrome with brass arm 225mm & flange. Complete all as specified and directed.

S&F in repair hand shower ABS multi flow with 1.50mtr stainless steel Flexible tube & hook. Complete all as specified and directed.

S&F in repair single lever basin mixer wall mount (concealed). Complete all as specified and directed.

S&F in repairs stop valves, 15mm bore dia, cast copper alloy,CP fancy type with long shank and cup(concealed type) screwed down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repair CP 2-way angle cock with flange. Cat part No 8111 Prayag or equivalent in Jaguar & Cera. Complete all as specified and directed.

S&F in repairs 8mm dia, brass chromium plated health faucet with 1 meter long flexible hose and wall hook complete all as specified and directed.

S&F unbreakable corner shelf (3 piece set). Complete all as specified and directed.

S&F unbreakable (square) wall mounted shelf 500mm (20"). Complete all as specified and directed.

S&F in repair CP towel rack 600mm long. Complete all as specified and as directed.

S&F in repair CP towel ring of 15mm dia. Complete all as specified and as directed.

S&F in repair CP soap dish. Complete all as specified and as directed.

S&F in repair CP tumbler holder. Complete all as specified and as directed.

S&F in repair CP toilet paper holder. Complete all as specified and as directed.

S&F in repair table top wash hand basin incl granite and WPC board box under wash hand basin. Size and design of WHB and WPC box incl SS handle, SS channel, SS butt hinges etc as per site requirement and design approved by Engr-in-charge Complete all as specified and as directed.

S&F in repair floor trap flat slotted grating with frame in square trap flat border size (150x150)mm with waste hole. Complete all as specified and as directed.

S&F in repair floor trap flat slotted grating with frame in square trap flat border size (127X127)mm. Complete all as specified and as directed.

Dismantling of old water tank exc 250 Ltrs & n.exc 500 Ltrs capacity and Supplied, hoisted and fixed in position any colour and three layered rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm bore dia brass Ball valve high pressure of with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. Complete all as specified and directed.

Taking up or down 15mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store and S & F 15 mm dia GI tubing medium grade with all fittings and fixed to walls or laid in floors incl Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall complete all as specified and directed.

Taking up or down 20mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store and S & F 20 mm dia GI tubing medium grade with all fittings and fixed to walls or laid in floors incl Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

M &L for Brick work with subclass 'B' old size bricks, (clay burnt bricks) straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

All as per ser item No 59.00 here-in-before but half brick wall built in cement mortar 1:4 complete all as specified and directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth, for foundation etc, or for shaft, well, cesspits, manhole, pier holes etc, n exc 10 Sqm on Plan and n exc 1.50 m in depth and getting out soft/loose soil, complete all as specified and directed.

M&L cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified & directed.

Returning, filing in including spreading, levelling watering & well ramming in layers not exc 25 cm as in hard/dense soil. Complete all as specified and directed.

Removing excavated material to a distance not exc. 50m & depositing where directed at a level n exc 1.50m aboove starting point. Complete all as specified and directed.

M&L rendering 15mm thick on stone masonry or other than fair faces of brick work surfaces with cement plaster 1:6, finished even and smooth without using extra cement. Complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E 165.

S&F Galvanised 2 strand, steel barded wire 2.24 mm dia barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc

S&F concertina razor wire coil for fencing of thickness 0.5mm, dia 2.5mm, barb length 10mm, barb width 13mm, barb spacing 26mm, 05 no. of loops per meter length including all necessary fixing with accessories complete all as specified and directed.

M&L preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide primer all as specified

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

M&L earth filling under floors spreading and levelling in layers n exc 25 cm thick with well ramming including watering and consolidation all as specified and directed.

M&L laying for hardcore of broken brick of burnt clay bricks (well graded) bricks of gauge n exc 63 mm , deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to a true surface all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded agg) as in sub base of floor etc complete all as specified and directed

M&L for providing 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete 1:2:4 Type B 0 (using 12.5mm graded crushed stone aggregates) and mixed with water proofing compound @ 200ml per 50 Kg of Cement consumed as per manufacturers instructions complete all as specified and directed. Note :- Water proofing compound will be measured & paid separetly as "supply only item".

M&L for providing formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; chajjas and similar work not exc 200mm thick; rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, exc 1.5m clear span cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides of square ,rectangular or polygonal pillars, posts, struts, piers, and columns rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing form work rough finished surfaces to edges of concrete flats, brick in floor cills, railing etc & similar works exc 10 cm but n.exc 20cm wide complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, and mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, and in shelves and the like complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates)as in beams, cantilevers, bressummers, lintels over 1.5m clear span complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates)as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

All as per item No 85.00 above but 6 mm to 8mm .

S&F vitreous china urinal, half stall type white, (excluding flushing clstern flush pipe and waste pipe) fixed incl all fittings. Complete all as specified and directed.

S&F viteress china wash down water closet pan (padestal pattern), white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc and including Plastic water closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

Material & labour 15mm thick rendering in cement mortar 1:4 on fair faces of brick wall or concrete surfaces finished even and fair complete all as specified

S&F steel windows or ventilators, fixed type, with glazing bar and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of apertures 1.18mm and fixed with tinned tags or galvanised wire stopples.Complete all as specified and directed.

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-1 as in sub base, plinth protection, path etc finished the surface even & fair complete all as specified

M&L for providing precast reinforced cement concreate 1:2:4 type B-1 using 20mm graded stone aggrigate) as in cover slab chullah hoods, chajjas, water troughs, shelves or similar works set & jointed in CM 1:4 complete all as specified and directed.

Supplied and fixed GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied and fixed GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied & fixed stop valves, 15mm bore dia cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F pillars taps, 15mm dia cast copper alloy with capstan heads CP fancy type screwed down high pressure with or without "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore and fixed complete all as specified and directed.

Supply and fixing PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity low level, white with inlet, ball valve float and handles including brackets fixing plug and 60mm long brass screws etc complete all as specified and directed

Supplied and fixed vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

S&F tublar towel rail brass chromium plated , 20mm dia, D type 60cm between the fanges. Complete all as specified and directed.

M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.

Supplied, hoisted and fixed inposition rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm dia Ball valve high pressure of PTMT with apoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F PVC floor/nahani trap with CP grating including jointing to waste pipe75mm dia fixed in cement concrete type B-1 (1:2:4) mix complete all as specified and directed.

M&L PCC 1:4:8 type C2 ,40mm graded agg., as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid & tested for 150 mm bore complete all as specified and directed.

M&L salt glazed stone ware drain pipes 150 mm dia (internal) laid in trenches and jointed as specified complete all as specified and directed.

M&LPreparation of newly plaster surface of wall and applying three coats of white wash complete all as specified and directed.

M&L Preparation of newly plaster surface of ceiling and applying three coats of white wash complete complete all as specified and directed.

S&F 20mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe. Complete all as specified and directed.

Supply and fix 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall with mild steel clamps complete all as specified and directed.

Supply and fix 75mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed laid in trenches and floor specified and directed.

Supply and fix PVC (SWR) bend/Tee 110 mm dia complete all as specified and directed.

S&F 75 mm PVC (SWR) bends fixed to wall/floor complete all as specified and directed.

S&F 110mm dia PVC (SWR) vent cowl complete all as specified and directed.

Material & labour for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification & drawing in SSR Part-II (2020). Complete all as specified and directed.

Material & labour for Factory made solid panel PVC wood grain printed door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side &as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togathers with solvent cement supplying & fixing the frame at site complete all as specified & directed.

S&F Brass chromium plated shower rose 125mm size complete all as specified and directed.(make: Jaquar/cera/pearl or equivalent)

Demolition of cement concrete of ground floor n exc 15 cm in depth in any position nototherwise specifically provided for.

M&L coloured Chequered cement concrete tiles 20cm x 20cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and no pigment laid over including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply & fix butt hinges stainless steel 100mm with screw complete all as specified and directed.

Supply & fix 100mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed

Supply & fix 125mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, ceiling light fittings, wall light fitings, MCBs / isolators, fan regulators, tube light fittings etc, removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia medium grade complete with and including all PVC conduit accessories / fittings, pressed steel terminal Modular metal flush boxes, including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing including modular white cover plate with frame (inner and outer cover) of suitable module all as per site requirement, concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, FRLS, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point controlled by one, one way switch 05 / 06 Amps.

All as per item No 126.00 above but One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size.

All as per item No 126.00 above but One ceiling fan/exhaust fan/ wall fan point controlled by one, one way switch 05 / 06 Amps.

All as per item No 126.00 above but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per item No 126 above but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 126.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia medium grade complete with and including all PVC conduit accessories / fittings, pressed steel terminal metal flush boxes, including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing including modular white cover plate with frame (inner and outer cover) of suitable module all as per site requirement, concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, FRLS, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point controlled by one, one way switch 05 / 06 Amps.

All as per item No 132.00 above but One ceiling fan/exhaust fan/ wall fan point controlled by one, one way switch 05 / 06 Amps.

All as per item No 132.00 above but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 132.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular Fan step regulator, 120W - 2 module complete all as specified and directed.

S&F Modular Bell push 6A 1 module complete all as specified and directed.

Supply and fixing Call Bell Ding Dong , AC, 230 volts single pole complete all as specified and directed.

Supply and fix decorative integral LED Tube light fitting 1x10 Watt , 2' long, polycarbonate housing complete with all accessories and fixing material all as specified and directed by Engr-in-Charge. Cat Part No - LUMLINEBS9WLED865SPCWH, Make : Havells or equivalent in Crompton/Bajaj

Supply and fix decorative wall light fixture , SS finish fixture with opal PC diffuser suitable for 40W incandescent candle lamp or 20W spiral CFL including LED lamp , warm white and including all accessories for fixing of fitting on wall complete all as specified and directed. Model - Voila Wall Light, Make - Havells or equivalent in Philips / Bajaj / Syska

Supply and fix decorative integral LED Tube light fitting 1x20 Watt , 4' long, polycarbonate housing complete with all accessories and fixing material complete all as specified and directed by Engr-in-Charge. Cat Part No - LUMLINEBS20WLED865SPCWH, Make : Havells or equivalent in Crompton/Bajaj

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Cat Part No - LBHP-10-CDL, Make Crompton or equivalent in Havells / Bajaj / Surya

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC, warm white recessed type suitable for POP false ceiling with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified & directed. Make - Havells / Halonix /Syska

Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make - Havells / Crompton / Bajaj

Supply and fixing round shape 12 watt 220 volts AC recessed/surface mounted type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make - Havells / Crompton / Bajaj

Supply and fixed LED security light 45 watt pre die cast housing with epoxy power coated pressure die cast aluminium high power LED street light with heat resistant toughened glass with lens including provisson of 32 mm bore light grade GI tube mounting bracket 0.9 m long made to shape bend upto 120 degree and fixed to wall by means of 02 Nos 40 x 5mm flate iron clamps nuts, bolts and washers etcx and provision of weather proof PVC insulated copper conductor cable 2.5 Sqmm 3 core as required for connection all as specified and directed. Cat Part No : LSTS-45-CDL-M, Make:- Crompton or equivalent in Havells / Surya.

S&F of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed.

Supply and fix exhaust fan made of sturdy Engineering plastic white coloured, complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm and fixed properly in existing window/ventilator including all fixing/finishing materials and connected B/R works i.e wooden/ply/Aluminium items for fixing the fan. Model - Ventil Air DX, Make - Havells or equivalent in Bajaj / Crompton / Orient

Supply and fixing Wall mounted fan 400 mm sweep, single phase 240 volts, white colour including connection wire three core etc complete all as specified and directed by Engineer-in-Charge. Model - Platina HS , Make : Havells, or equivalent in Bajaj/Crompton.

S&F for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth wire dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing including taking down old unserviceable submain wiring of any size any type complete all as specified & directed. Note:-One meter of 25mmd dia non-metalic PVC conduct along with 2x6 sq mm wire and one 6 sq mm earth shall be measured as one unit length.

Supply & fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces including taking down old unserviceable distribution board of any capacity complete all as specified and directed.

M&L Sheet metal enclosure for DB's double door 240 Volt with IP 43 protection 200 amp rated insulated bus bar, shrouded neutral bar, earth bar, blanking plate, cable ties & circuit identification labels 240 volt SPN 8 way concealed in wall including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / coloure wahsing / distempering etc to the disturbed surfaces to match the existing with metal door including taking down old unserviceable distribution board of any capacity complete all as specified and directed. Make Legrand / ABB / Indoasian

Supply and fix IP-43-IK09 protection metal double door DB 200 Amps rated copper bus bar, pan assembly etc with interlocking links, blanking plates cable ties identification labels Vertical TPN 4 way , with provision to mount 100Amp MCCB 4 Pole as incomer and SP/DP MCB as out going all including taking down old unserviceable distribution board of any capacity complete all as specified and directed. Make Legrand / ABB / Indoasian

Supply and fix MCCB 4 Pole 100 Amps 16 KA, 415 volts , 50 Hz with adjustable thermal & magnetic release complete all as specified and directed. Make - Legrand / ABB / Indoasian

Supply and fixing MCB SP, AC, 240 volts of 06 to 32 Amps, C curve, 10 kA, and making connections complete all as specified & directed . Make Legrand / ABB / Indoasian

Supply & fixing MCB SPN, AC, 240 volts of 40 Amps to 63 Amps , C curve, 10 kA, and making connections complete all as specified & directed. Make Legrand / ABB / Indoasian

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 35 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches / fixing on wall / under road crossing through protection pipe etc complete all as specified and directed.

Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI strip 32x6mm by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s/ Machinery etc including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. Note:- (i) The cost of earth electrode, main earthing lead (from earth electrode to test point) up to 7.5 metre, connecting earth electrode & earthing lead as specified and adequate quantity of charcoal, dust, common salt shall be included in this item. (ii) Earth electrode beyond 7.5 metre shall be measured and paid separetely. (iii) After completion of item if desired test result is not obtained, the earthing shall be redone without any extra cost to Govt.

S&F Rigid non-metallic PVC conduit 25mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for TV / Telephone including cutting charges complete all as specified and directed.

S&F PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep for TV/Telephone with 3mm thick plastic laminated sheet covercomplete all as specified and directed.

S&F cable telephone socket outlet in modular boxes complete with all accessories coneection etc complete all as specified and directed

S & F modular telephone socket (RJ-11) in modulaer boxes complete with all accessories , connections etc complete all as specified and directed.

Supply and drawn co-axial cable single core copper PVC insulated and overall screened with tinned copper net and PVC insulated all as specified and directed for audio / video cable.

Supply and drawn 1 pair 2.75 mm conductor of size 0.5mm copper PVC insulated and overall screened with tinned copper net and PVC insulated all as specified and directed for telephone.

Taking down ceiling fan/Exhaust Fan, sealing cable end, dismantling blades and removing fan and blades to store yard all as specified and directed by the Engr in Charge.

Hanging only ceiling fan exhaust fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed

Taking down water heater vertical storage type 25 Ltrs capacity having stainless steel inner tank with glass enamelled coating , closed /ventilated type, 240 volts, glass coated heating element complete with all accessories and depositing to MES store yard for keeping in safe custody complete all as specified and directed.

Fixing only water heater vertical storage type 25 Ltrs capacity including fixing arrangement with suitable size of fastner, nuts, bolts and washer etc incl making good disturbed surface with plaster in CM 1:4 complete all as specified and directed. Note:- Installation of geyser includes all connected items eg. PVC pipe for connection of inlet and outlet complete.

M&L switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

S&F socket outlet 2 in 1, 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed.

S&F switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed.

S&F of socket outlet 2 in 1, 3 pin, 05 / 06 Amps and 15 / 16 Amps, flush type, 240 volts complete all as specified and directed.

S&F lamp holder (Angular / Straight), PCV/Polycarbonate insulated body, with back plate for batten fitting complete all as specified and directed

S&F LED lamp 9/10 watts, CDL, with Star rating all as specified and directed. Make :- Havells, Cat part No LHLDEUEBML8R009 or equivalent to crompton/Wipro.

S&F decorative Integrated type LED Tube light fitting 1x20 Watt , T-5, polycarbonate body with inbuilt driver complete with all accessories and fixing material complete all as specified and directed. Cat Part No - LCTLN-20-CDL, Make - Crompton or equivalent in Havells / Syska

S&F exhaust fan 300 mm sweep metalic body with louver, 240 volts AC single phase, 50 Hz, ISI marked, including necessary work for opening round hole in wall for fixing of exhaust fan inside and louver out side making connection, including cable, nut bolt and other fixing material complete all as specified and directed. Model- Ventil Air DB , Make - Havells or equivalent in Crompton / Bajaj / Usha

M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sq. mm 2 core laid in trenches, fixing on wall/under road crossing through protection pipe etc complete all as specified and directed.

Material and labour for sand cushioning with dry fine sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading, levelling and hand punning in layers in cable trench for protection of under ground cable complete all as specified and directed.

Supply / laying under road /floor and fixing 40 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches/wall/pole for cable protection complete all as specified and directed.

Supply and fixing MCB DP, AC, 240 volts of 40 to 63 Amps, C curve, 10 kA. all as specified and directed by engr-in-Charge.

Supply and fixing including testing water heater geyser vertical storage type 25 Ltrs capacity having stainless steel inner tank with glass enamelled coating BEE 5 star rating, closed /ventilated type, 240 volts, glass coated heating element complete with all accessories, including fixing arrangement with suitable size of fastner, nuts, bolts and washer etc incl making good disturbed surface with plaster in cement mortar 1:4 complete including recolouring the plastered surface to match the existing surface complete all as specified and directed. Note:- Installation of geyser includes all connected items eg. PVC pipe for connection of inlet and outlet complete.

M/s D.K.Enterprises

M/S AMAR ELEKTRO CENTRE

Jay Ambay Enterprises

Rajneesh Jain

SA construction co.

mohanlal gupta

AEGIS INTERNATIONAL

SHAKTI CONSTRUCTION CO