SPECIAL REPAIR TO EXTERNAL SURFACES OF BLDG NO P-510, P-512, P-514, P-516, P-517, P-518, P-519, P-520 , P-521 AND P-523 UNDER AGE BR-II OF GE (AF) ADM AREA AT AF STATION AGRA. (RECALL)

Taking down cement plaster on brick or PCC, stone masonry wall etc including racking out joints, hacking for key surubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on external surfaces of walls etc in cement mortar 1:4 with Pidi Proof 101 LW(+) or Dr fixit or equivalent liquid water proofing admixture @ 200 ml per bag of cement finished even and smooth without using extra cement complete all as specified and directed. Note :- (a)The Rates are inclding Use of all scaffoldings up to 14 M ht of buildings . (b) (Rate of Water proofing admixture shall deemed to be included under this item.

M&L for rendering / plastering, 10mm to 30 mm thick as required at site in cement mortar (1:3) , for repair of RCC chajja, roof projection, fin facia , balcony railing etc including applying neat cement slurry @ 3 Kg/sqm befor rendering , finishing surface even and smooth without using extra cement complete all as specified and directed. Note :- Rate of Water proofing admixture shall deemed to be included under this item.

M&L for rendering 15mm thick on internal surfaces of walls etc in cement mortar 1:6 with water proofing admixture Pidi Proof 101 LW(+) or Dr fixit or equivalent liquid water proofing admixture @ 200 ml per bag of cement finished even and smooth without using extra cement complete all as specified and directed. Note :- Rate of Water proofing admixture shall deemed to be included under this item.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, colour patterns of stone chippings shall be same as adjacent existing surface in cluding taking out existing stone grit & plaster complete all as specified and directed. Note :- Payment for providing grooves shall bemeasured and paid seperately.

M&L for scraping out loose mortar / concrete by chiseling / wire brushing complete and applying rust removing solution (rebaklene soulution) to exposed corroded reinforcement and applying a coat of epoxy primer (Nitozink primer from M/s Fosroc or equivalent as approved by GE) as per manufacture instructions providing and fixing of wire mesh of weight 2.5 Kg per Sqm and apply 25mm average thickness in CM (1:4) mixed with liquid integral water proofing compound (complast 'X' as per manufacture instructions) with gunitting machine at a pressure not less than 5Kg/Sqcm finally rendering 10mm thick plaster in CM 1:4 using liquid integral water proofing compound (complast 'X' 421 i.e. from M/s Fosroc and nitobound AR from M/s Fosroc or equivalent as approved by GE) in the proportion recommended by the manfacture complete all as specifed & directed. Note :- The Rates are inclding Use of all scaffoldings up to 14 M ht of buildings .

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens,nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove similar to adjecent existing surface complete all as specified and directed.

M&L for applying two coats of homogenious mixture super latex 302 of Dr fixit or equivalent in the ratio (1:4:7) (One part super latex, 4 part water and 7 parts of cement) @ 1.50 Kg /sqm on surface before plastering complete all as specified and directed.

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on Newly Plastered surfacs of brick (plastered or un-plastered) or concrete surface including preparation complete all as specified and directed. Note: 1. Exterior Primer & Acrylic emulsion paint to be applied on wall surfaces with airless spray machine (Mechanical means) as approved by Engr-in-Charge . 2nd coat shall be applied after 1st coat is dry approximately 6-8 hrs between two coats. Note :- The Rates are inclding Use of all scaffoldings up to 14 M ht of buildings .

M&L for complete removal of existing treatment on wall/roof projections including facia, cornices, etc by scrapping with mechanical sander (having mechnical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on old prepared surface of brick (plastered or un-plastered) or concrete surface over 1 mm thick wall care putty to mae the surface smooth complete all as specified and directed. Note: 1. Exterior Primer & Acrylic emulsion paint to be applied on wall surfaces with airless spray machine (Mechanical means) as approved by Engr-in-Charge . 2nd coat shall be applied after 1st coat is dry approximately 6-8 hrs between two coats. 2. Preparation of surfaces shall be measured and paid separately Note :- The Rates are inclding Use of all scaffoldings up to 14 M ht of buildings .

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for complete removel of existing treatment of old plastered wall surfaces and applying two coats of white wash complete all as specified and directed.

M&L for complete removel of existing treatment of old plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed.

M&L for two coat of synthetic enamel paint one coat of red oxide primer on old steel surfaces of any description over 10cm width or girth including preparatin of old painted steel surfaces complete all as specified and directed.

Removal of plants/trees//Shrubs from roof tops/sides, external walls of bldg, chajjas, wall junctions of rains water/CI soil /waste pipe junctions including taking out the roots entered in wall/slab surfaces and making good the disturbed surface using (1:2:4) type B-O or cement mortar (1:2)including repairing the GI/CI/PVC pipe joints which were damged during cutting/taking out process to match with the existing and finishing the disturbed surface to match with existing including necessary scaffolding/staging upto a height of 15 .00 M from the ground level complete all as specified and directed.

Disconnecting water tubings near water tanks, taking out old rusted GI tube short lengths (nipples) embedded in RCC tank walls as out lets/inlets by chiselling and replacing with new nipples, making good with cement concrete 1:2:4 and refixing of tubing complete all as specified and directed. Note: Rates are incl Supply & fixing of new nipple/long screw complete all as specified and directed.

M&L for RCC (1:2 :4) type B-0 , (using12.5mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands plinth courses, string courses lacing courses, parapets and railings upto 60 cm in height copings, kneelers, apex stones bed plates, kerbs not provided cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. Note :- 1.Necessary from work is including this same item only 2.The Rates are inclding Use of all scaffoldings up to 14 M ht of buildings 3. TMT bar shall be measured and paid sepratly

M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection and finished even and smooth with using extra cement complete all as specified and directed..

M&L for brickwork with old clay bricks straight or curved on plan with mean radius exc 6 m built in CM1:6 incl demolition built in CM of any description including demolition of brick work complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed

M&L for Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framework of water tanks and similar work conforming to Fe.290.Gde complete all as specified and directed.

M&L for two coat of synthetic enamel paint on steel surfaces of any description over 10cm width or girth including preparatin of new steel surfaces over one coat of red oxide, zinc coating complete all as specified and directed.

S&F 15 mm dia bore Medium grade GI Pipes with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down existing GI tuging complete all as specified and directed.

S&F 20 mm dia bore Medium grade GI Pipes with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down existing GI tuging complete all as specified and directed.

S&F 25 mm dia bore Medium grade GI Pipes with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down existing GI tuging complete all as specified and directed.

S&F Gun-metal, globe or gate valves of 20mm, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F Gun-metal, globe or gate valves of 25mm, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed to walls including demolition and breaking up rain water pipe (PVC , AC, or re- in forced cement concrete ) of size 75 & 100 mm bore complete all as specified and directed.

S&F 110mm dia PVC (SWR) bend /shoe without oval access door complete all as specified and directed.

S&F in repair 100mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair 75mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F 100 mm CI bend pieces diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75 mm CI bend (any radius) without oval access door, diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 100 mm CI branch pieces diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75 mm CI branch pieces (any radius) without oval access door, diminishing pieces or tapers (larger bore measured) complete all as specified and directed.