Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹26,600
Closing Date
18 May 2020, 3:00 pmClosed
Section Head Civil
GOA SHIPYARD LTD. VADDEM , VASCO DA GAMA , GOA -403802
Repairs/ Renovation of toilet at Govt High School main Vasco under CSR 2020-2021
2020_GSL_81564_1
CIVIL/01/GSL/CE/ADS/ETN-155
Open Tender
Job Works
Works
45 days
Goa Shipyard Limited
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,180
Yes
Goa Shipyard Limited
₹26,600
Yes
28 May 2020
1 Apr 2020
19 May 2020
1 Apr 2020
18 May 2020
2 Apr 2020
1 Apr 2020 - 20 Apr 2020
Amount
Disposal of sludge from the septic tank and transporting of silt/sludge/solid through municipal vehical to dump at municipal designated dumping ground including tools and labour and transport etc complete.
Dismantling of existing old fittings with door shutters, and frame, grills work and also with all the sanitary fittings including W C, wash basin and disposal of unserviceable materials at Municipal dumping ground outside school premises etc complete with all tools, plants, labour and materials, transport complete.( Boys & girls toilet block )
Dismantling tiles and disposing the same as instructed by Engineer in charge to Municipal dumping ground outside school premises etc complete with all tools, plants, labour and materials transportation complete.
Dismantling old loose cement plaster by well controlled mechanical means,carefully removing existing damaged loose disintegrated concrete of RCC coloumns,beams,slab,pardis,chajja,soffit.etc.Cleaning the surface by wire brush,scrapping the steel rods,applying rust removerof approved make, providing and welding steel bars to the slab,beams,coloumns wherever required.Providing a coat of anti corrossive.Providing and appying bonding agent , providing and applying/casting micro concrete of approved make to the disintegrated concrete which was removed. Providing and fixing chicken mesh 1/2"x1/2" of 22guage to hold microconcrete intact,applying a coat of bonding agent and finally plastering the surface with Acrylic repair morter made of Rheomix 131 or Rheomix 141 and curing the same.The above item includes giving proper support to the slab with telescopic props and proper steel scaffolding etc upto the height required, transporting and dumping the dismantled materials to muncipal dumping ground outsideSchool property etc. complete with all tools, plants, labour and materials. (Makes: Sika, Fosrock, Dr. Fixit)
Demolishing R.C.C. work manually/ by mechanical and disposal of unserviceable material outside school primises to muncipal dumping ground as per direction of Engineer - in- charge.
Excavation in dense or hard soil/murrum ect. Including removal of obstruction such as small trees, vegetation ect.disposal of unserviceable material outside school primises to muncipal dumping ground including refilling all labour and material ect complete.
Soling with hard laterite rubble stone of 20cm to 30cm size including hand packing, spreading murrum, watering, laying to necessary compacting etc complete with all tools, plants, labour and materials.
Providing and laying plain cement concrete (1:3:6) using 20/40mm graded black trap stone metal out of quarried boulders as coarse aggregate including mixing, depositing, consolidating, levelling, curing, etc. All tools, plants,labour and materials complete.
Striping old plaster,neeru, stacking the same as instructed by Engineer in charge.& disposal of unserviceable materials at Municipal dumping ground outside GSL premises etc complete with all tools, plants, labour and materials transportation complete.
Plastering with cement mortar (1:4) 15mm thick in single coat for internal surfaces of walls including curing etc all labour & material etc. complete. All labour & material etc. complete
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).
15 mm cement plaster on inside wall finished with a floating coat of neat cement of mix :for septic tank.
Constructing masonry in foundation and plinth using precast cement concrete solid blocks having a crushing strength of not less than 70kg/m2 (28 days curing) and a mix not leaner than (1:5:10) in cement mortar (1:6) including providing specially moulded blocks at junctions and corners, curing etc complete with all labour and materials.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form for all heights -Suspended floors, roofs, landings, balconies and access platform
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding with GI binding wire all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. Make SAIL/JSW
Supplying and fixing water supply lines using approved make/quality CPVC pipes of various dia and jointing with pipe specials such as bends, tees, couplings, elbows, Unions, reducers etc.including earth work excavation /dismantling masonry/PCC,making chase in wall and finishing the same complete with all tools, plants, labour and materials. 12/15mm dia - make Astral/Ashirwad
Supplying and fixing water supply lines using approved make/quality CPVC pipes of various dia and jointing with pipe specials such as bends, tees, couplings, elbows, Unions, reducers etc.including earth work excavation /dismantling masonry/PCC,making chase in wall and finishing the same complete with all tools, plants, labour and materials. 20mm dia - Astral/Ashirwad
Supplying and fixing water supply lines using approved make/quality CPVC pipes of various dia and jointing with pipe specials such as bends, tees, couplings, elbows, Unions, reducers etc.including earth work excavation /dismantling masonry/PCC,making chase in wall and finishing the same complete with all tools, plants, labour and materials. 25mm dia -Astral/Ashirwad
Supplying and fixing waste water lines using various dia PVC/SWR pipes of Prince/Finolex or any other equelent approved make and jointing with pipe specials such as bends, tees, elbows ,plug etc.including earth work excavation /dismantling masonry/PCC ,making chase in wall and finishing the same complete with all labour and materials. 65mm
Supplying and fixing waste water lines using various dia PVC/SWR pipes of Prince/Finolex or any other equelent approved make and jointing with pipe specials such as bends, tees, elbows ,plug and other fittings etc.including earth work excavation /dismantling masonry/PCC ,making chase in wall and finishing the same complete with all labour and materials. 110mm
Supplying and fixing PVC Nahani trap 4" dia with cover and fittings including finishing,making good the floor / walls, etc. All labour and materials etc complete.
Providing and laying Ceramic floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in colours including cutting, cleaning, curing, filling the joints with white cement mixed with suitable colour pigment, on 20 mm thick Cement Mortar 1:4 (1 Cement : 4Coarse sand) etc. complete with all labour and materials.(Johnson / Kajaria /Nitco/somany make) (Basic rate of Rs.350/- per Sq.mtrs)
Providing and fixing ceramic glazed wall tiles of Johnson / Kajaria /Nitco/somany of approved colour and pattern, 300x450mm size laid in skirting/dado with 1:3 cement mortar/cement paste as per requirement including cutting,making holes, cleaning, curing, filling the joints with white cement mixed with suitable colour pigment/special grout, etc complete with all tools, plants, labour and materials complete.(Basic Rate Rs.450/M2)
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth -Granite Stone of approved shade (Basic Rate Rs:- 2205.9 /m2 )
Providing and fixing angualr cock of approved quality : Jal/Ark/plumber/hindware/Belved make
Providing and fixing bib cock of approved quality conforming to IS:8931 Jal/Ark/plumber/hindware Belved make with all tools, plants, labour and materials.
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests - make Hindware/cera/parryware
Providing and fixing white vitreous china flat back stall urinal(Hindware/cera/parryware)with white flushing arragment, with fittings, standard size C.P. brass flush pipe,Push cock (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating ,and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required :
Providing & fixing wash basin of vitreous china 550x400mm make -Hindware/cera/parryware with all accessories such as C.I. brackets,waste coupling,rubber plug,C.P. brass trap with 8cm deep seal with wall flanges, 12mm P.V.C. plastic pipe with necessary inlet & outlet connection, long neck pillar cock jal/Ark/plumber/hindware make -waste coupling incl.sealing around the wash basin with white cement ,paiting brackets etc.all tools, plants, labour and materials complete.
Providing and fixing 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of EPEE /Rajeshree or any other equivalent make required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames with hinges. complete with all tools, plants,labour and materials.
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of EPEE /Rajeshree or any other equivalent make cross-section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat . Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. complete with all tools, plants,labour and materials.
Providing and fixing M.S. grills of required pattern for door / window/ gate with aldrop etc. with M.S. flats,10 mm square bars etc. including cutting ,welding, grinding, priming coat with approved steel primer & oil paint b all L & M complete.
Providing and fixing bright finished ss latch with necessary screws etc. complete : 300x16x5 mm
Providing and fixing bright finished ss Aldrop (250mm)with necessary screws, etc. complete.
Providing and fixing bright finished ss handles with screws etc. complete. Size- 150mm
Providing and fixing 600 x 450 mm mirror of superior glass (of approved quality) bevelled mirror polished edge with back support fixed to wall all labour and materials etc. complete.
Providing and fixing of aluminium louvered ventilator with glass louvers with all labour and materials etc. complete.
Applying primer coat for distemper of water thinnable cement primer of approved brand and manufacture on wall surface - make Dulux/asian/berger
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade in double coat with approved colour,shade all labour and materials complete - make Dulux/asian/berger
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Applying primer coat for wheather shield/apex of water thinnable cement primer of approved brand and manufacture on wall surface: water thinnable cement primer -make asian
Providing and applying Wheather Sheild Acrylic Paint of Dulux/Asian or any other approved equivalent make for external surfaces,overhead water tanks,etc. including preparing the surface,cleaning,coir brushing,scaffolding,all labour and materials compleyte in Double coat with approved colour,shade all labour and materials complete.
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : complete with all tools, plants,labour and materials.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 with excavation complete -Inside dimensions 455x610 mm and 45 cm deep
Dismantiling of old wiring and replacing the wiring for new light point with 1.5sqmm pvc insulated 650votls grade, standard copper conductor wires in rigid pvc surface casing and capping including providing 5 amps operated flush/wall mounted modular type switsh in 2mm pvc/ms box with 2mm bare copper wire etc complete wit all materials . ( Average length of wiring can be of approx . 5 mtrs to 8 mtrs per point )
M/s. Sai Grace Constructions
Petrocom Infra Projects
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .