Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.0 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹17.9 L+₹1.9 L (12.0%)Rejected-AOC | L2 | Rejected-AOC OTHER THAN LOWEST BIDDER |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
10 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE
HQ CWE Rajouri PIN-900129 C/o 56 APO
CONSTRICTION OF 5000 GALLONS SEMI UNDERGROUND TANK ALONGWITH PROVN OF WATER SUPPLY SCHEME AT NEW JHANGER BASE UNDER GE 862 EWS
2022_MES_517570_3
CANO-CWE/RAJ-04/2022-23
Open Tender
Civil Works
Item Rate
180 days
Jhanger Base AoR of GE 862 EWS
Class E category a(i)
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹30,000
Yes
20 Sept 2022
20 Jul 2022
17 Aug 2022
20 Jul 2022
10 Aug 2022
27 Jul 2022
Amount
Supply & fixing column pipe GI tubing Heavy grade 65 mm bore duly welded flanged (thickness of flange 12 mm having 04 holes) with and including rubber packing of 6mm thick, nuts, bolts, washers complete in 3 mtr length as column pipe in bore well, complete all as specified and directed.
Supply & fixing GI tubing Heavy grade 100 mm bore for making stand post complete all as specified and directed.
Supply & laying Galvanised steel (Gl) tubing medium grade 100 mm bore with screwed socket joints, together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc.) and laying in trenches, including cutting, screwing and waste and for making forged bends on piping as required.complete all as specified and directed.
Description all as per items srl No 03 above but GI tubing 80 mm bore.
Sluice valve with flanged ends and stainless steel spindle and driled hole of size 100 mm dia as per IS:14846:2000. ISI marked, both end flanged with iron wheel shut and open direction including rubber insertion packing rings, nuts, bolts and washers of class PN-1.6 complete all as specified and as directed.
Supply and fixing non return valve, gun metal seat and flap and flanged including rubber insertion packing rings, nuts, bolts ans wasers etc. complete of size 100 mm dia as per IS:5312/2004, ISI marked class PN-1.6 complete all as specified and directed.
Supply and laying, joitng and testing, in replacement, of XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 35 sqmm 4 core laid in trenches, ducts, pipes including taking out old unservieable cables all as specified and directed.
Supply, Installing, commissioning and testing of centrifugal multi stage pump set of discharge not less than 13 cubic metre per Hours at 120 mtr head in CI const with CI impeller, C-40 shaft, Gland Packed electric motor, 1450 RPM, 415 volts, 3 phase, 50 HZ, minimum 3 star rated, 20 HP capicity, TEFC type, foot mounted, baseframe, coupling with all fittings as manufactures recommendations complete all as specified and directed . Make Kirloskar Model No : RKB 65 19 or equvalent to CG/KSB
Supply, installation, commissioning and testing of submersible pump set electric driven, 415 volts discharge 240 LPM at 115 mtr head with CI Impeller, CI diffuser, EN-8 shaft, stainless steel stainer comprising with suitable capacity of Electric motor designed for working on 415 volts, 3 Phase, 50Hz, filled with oil for effective cooling and life long lubrication of heavy duty ball bearing and mechanical seal complete with starter of suitable capacity with & including protections against over load, single phase, phase sequence reversal and with sumbersible cable PVC insulated unsheathed with stranded copper conductor 1100 volts grade flat two run of 3 core 6 Sqmm for connecting of Pump to star delta starter without joint complete all as specifed and as directed. Make : Model No 125HHF 1008 of Kirloskaror equvalent to KSB. /CG/ CRI ..... contd to item No-9.01
Supply, fixing, installation, testing and commissioning of LT electric panel totally enclosed (Factory fabricated ) CPRI approved outdoor type, double door powder coated inside & outside made of CRCA sheet not less than 3.15mm thick with front opening having locking arrangement spray painting internally/externally. including internal wiring with suitable size of copper strip bus bar chamber 3 phase and four wire type system 415 volts 50 HZ consisiting of aluminium strip bus bar of capacity 250 Amps and consisting of the following:- INCOMING:- (a) MCCB 100 Amps adjustable thermal and fixed magnetic setting with 4 pole 50 KA - 01 No. (b) Digital Combimeter ( 7 in 1) with 4 digital LED display -01 No (c) Indicating lamp LED type one set in incoming phases. (d) Internal wiring with PVC insulated copper conductor multistranded cable 1100 volts grade IS 694 marked of appropriate gauge including copper lugs. ........contd to item No-10.01
OUTGOING:- (a) MCCB 63 Amps adjustable thermal and fixed magnetic setting with 4 pole, 35 KA - 02 Nos. (b) 32 Amp ,SPN MCB of 10 KA Rupturing capacity"C" Series -02 Nos NOTE : (i) Fixing arrangement of Star Delta Starter suitble for above bore well and centrifugal pump set 15 HP deemed to be included in quoted rate. (ii) Panel shall be CPRI approved make only.
Earthing complete with galvanised iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI strip 25x4 mm as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire/strip protection pipe GI light grade 40 mm bore from earth plate to main switch board/panel, watering pipe 20mm bore with wire mesh and funnel at top, earth pit and PCC pit 1:3:6 type C-1 with RCC pit cover of size 30cm x 30cm made of RCC 1:2:4 type B-1 with suitable handle, angle iron of frame made out of angle iron of size 40 x 40 x 4 mm, adequate quantity of charcoal dust and salt layer all around the earth plate, earth work in any type of soil, removal of surplus excavated material and returning filling in all as required at site including test point made out of steel plate of size 75 x 75 x 6 mm fixed to wall and as specified in electric plate No 03 of SSR part I 2009 and directed by Engineer-in-charge.
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc for shafts, wells,cesspits, man holes, pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth and getting out in any type of soil, complete all as specified.
Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified.
Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and directed by Engineer-in-Charge.
Dry sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.
Supply and laying brick covering with width equal to width of brick as mechanical protection to cable using sub class ‘B’ bricks laid flat, size 230mm x 115mm x 75mm, complete all as specified and directed.
M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm grade crushed stone aggregate) as in foundations filling and mass concrete complete all as specified and directed by Engr-in-Charge.
M&L for providing plain cement concrete 1:2:4 type B-1 (using 20mm grade crushed stone aggregate) as in foundations filling and mass concrete complete all as specified and directed by Engr-in-Charge.
Excavation over area not exceeding 1.5m deep and and getting out in soft / disintegrated rock, complete all as specified and directed.
Excavation over area exceeding 1.5 m but not exceeding 3m deep and and getting out in soft / disintegrated rock, complete all as specified and directed.
Excavation over area exceeding 3m but not exceeding 4.5m deep and and getting out in soft / disintegrated rock, complete all as specified and directed.
RCC M-30(design mix) using 20mm graded crushed stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases of columns etc. complete all as specified and directed by Engineer-in-Charge.
RCC M-30(design mix) using 20mm graded crushed stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses. complete all as specified and directed by Engineer-in-Charge.
RCC M-30(design mix) using 20mm graded crushed stone aggregate as in as in slab supported on walls, beams, column etc, complete all as specified.
Form work to sides of concrete foundations, footings, basis of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to better curved surface with rough finished surfaces of concrete complete all as specified & directed
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter curved surface with rough finished surfaces of concrete complete all as specified & directed
Form work to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick curve surface for rough finished surfaces of concrete, complete all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces of concrete, complete all as specified and directed.
TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified.
Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.
10mm thick rendering in CM 1:3 on concrete surfaces of internal wall & finishing the surface even and smooth without using extra cement, complete all as specified.
Preparation of newly plastered / unplastered surfaces of wall including cornices pilaster etc, and applying two coats of white wash, complete as specified and directed.
10mm thick rendering in CM 1:3 on concrete surfaces of external wall / top of slab & finishing the surface even and smooth without using extra cement, complete all as specified.
Preparation of newly plastered / unplastered surfaces of external wall / top of slab including cornices pilaster etc, and applying two coats of cement base paint , complete as specified and directed.
05mm thick rendering in CM 1:3 on concrete surfaces of ceiling & finishing the surface even and smooth without using extra cement, complete all as specified.
Preparation of newly plastered / unplastered surfaces of ceiling including cornices pilaster etc, and applying two coats of white wash, complete as specified and directed.
Supply only Integral water proofing compound. Note:- Mixing of WPC shall be done as per manufacturer's instruction. The rate of mixing of WPC shall be inclussive of rate to be quoted against respective item of plastering/PCC.
Mild steel work conforming to Fe-290 (Gde E-165) as in steel gate etc. with & including pintle hinges, stops, hand-made sliding bolts, etc, complete all as specfied.
RAJINDER CHOUDHARY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .