REPAIRS TO VARIOUS UTILITY SERVICES INCLUDING INTERNAL AND EXTERNAL ELECTRIFICATION SUMMER COOLING WINTER APPLIANCES AND EXTERNAL WATER SUPPLY SERVICES AT GANESHKHIND PUNE

Amount

Taking down carefully Copper aluminium point wiring (light, Fan, Exhaust Fan, Bell, socket or power point) complete including fixture & fitting such as switches, sockets, power socket, bell, bell push, light fittings, regulator, bracket holder, boards and making good disturbed surfaces of wall and ceiling etc. complete all as specified and directed.

Taking down carefully unserviceable sub main wiring complete all as specified and directed.

Taking down unserviceable DBs any type / size carefully disconnecting and making good disturbed surfaces complete all as specified and directed.

Taking down unserviceable MCCB/ MCB SP/SPN/Isolator of any rating & size complete all as specified and directed.

Material and labour for Point wiring complete with 1.5 Sqmm single core unsheathed PVC insulated 1100 V, FRLS grade with multistranded copper conductor ISI marked drawn through in existing concealed / surface PVC/Steel conduit and accessories and existing MS pressed steel terminal box and replace laminated sheet 3mm thick for mounting of switches, socket regulator etc including 1.5 Sqmm PVC insulated unsheathed cable multistranded copper conductor and connecting to earth dolly for the following complete all as specified and directed by Engr-in-charge. (a) One light point controlled by one 5 Amps one way switch.

(b) One light point controlled by Two way switch

(c) One ceiling Fan/Exhaust Fan point controlled by one 5 Amps switch.

(d) One bell/buzzer point controlled by one bell push button on independent board.

(e) One 3 Pin 6 Amps socket point on the independent board.

(f) One 3 pin 6 Amp socket point on the same board with other switch.

All as per above item No-5 but with 2.5 Sqmm cable for 15 Amp switch socket out let point on independent board including 2.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earthing continuity conductor complete all as directed and specified by Engr-in-charge.

Material and labour for Point wiring complete with 1.5 Sqmm single core unsheathed PVC insulated 1100 V, FRLS grade with multistranded copper conductor ISI marked drawn through and including PVC casing & caping of suitable size fixed on surface wall/ceiling and including pressed steel terminal box, grouted in wall and the 3mm thick terminated sheet top cover for mounting of switches, sockets regulators etc including 1.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor and connecting to earth dolly for the following complete all as directed and specified by Engr-in-charge. (a) One light point controlled by one 5 Amps one way switch.

(b) One light point controlled by two way switch

(c) One ceiling Fan/Exhaust Fan point controlled by one 5 Amps switch.

(d ) One bell/buzzer point controlled by one bell push button on independent board.

(e) One 3 Pin 6 Amps socket point on the independent board.

(f) One 3 pin 6 Amp socket point on the same board with other switch.

All as per above item No-12 but with 4 Sqmm cable for 15 Amp switch socket out let point on independent board including 4 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earthing continuity conductor complete all as directed and specified by Engr-in-charge.

Supply and fixing switch piano flush button type , single pole one way 5 Amps complete all as specified and directed.

Supply and fixing switch piano flush button type , single pole two way 5 Amps complete all as specified and directed.

Supply and fixing Bell push flush type SP 5 Amps complete all as specified and directed.

Supply and fixing switch socket combination out let 5 pin 6 Amps flush type complete all as specified and directed.

Supply and fixing switch socket out let 2 in 1, 3 pin 5 and 16 Amps flush type Universal complete all as specified and directed.

Supply and fix ceiling rose ,3 phase ,PVC polycarbonate ,insulated body complete all as specified and directed.

Supply and fix stepped type elctronic fan regulator 240 V 50 HZ , flush type complete including connection complete all as specified and directed.

Supply and fix call bell (Ding Dong) 240 V, 50 Hz complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose at any height complete all as specified and directed. Make: Havells / Philips/Crompton/Wipro/ Bajaj Cat of Havells :- LUMILINE BS 20 W LED 865 SPCWH Cat part of WIPRO :-Product 20 W 2700K Code No D532027 Bajaj Cat Part :- BCLSB 20 WWH or tecnocommercial equivalent in Philips & Crompton

Supply and fix LED tube light fitting 10W, 2 feet long wall mounted anodized aluminum extruded heat shrink provided for efficient heat deception and interchangeable integrated electronic driver luminaries LED as light sources housing complete with all accessories including suitable lamp, internally prewired & including up with twin core twisted flexible copper cable of suitable size complete all as specified and directed. Make: Havells / Philips/Crompton/Wipro/ Bajaj Cat of Havells :- LUMILINE BS 10 W LED 865 SPC WH Cat part of WIPRO :-Product 10 W 2700K Code No D531027 Bajaj Cat Part :- BCLSB 10 WWH or tecnocommercial equivalent in Philips & Crompton

Supply and fix LED bulk head fitting environmental friendly, ultra modern, energy saving surface mounted fitting of 10 W, complete with all accessories incl twin core twisted flexible copper cable of suitable size complete all as specified and directed. Make : Make: Havells / Philips/Crompton/Wipro/ Bajaj Cat part of Havells :- HEXA FT 10 W LED 857 SSYM BOC Cat part of WIPRO :-Product 10 W LW07-141-XXX-S7-G1 Bajaj Cat Part :- BIBWPIOWLED MT or tecnocommercial equivalent in Philips & Crompton

Supply and fix LED glaze wall decorative light fitting environmental friendly, ultra modern, energy saving wall mounted fitting of alongwith 10W LED bulb complete with all accessories incl twin core twisted flexible copper cable of suitable size complete all as specified and directed. Make :Make: Havells / Philips/Crompton/Wipro/ Bajaj Cat of Havells :- LHFOECE1 TZ100 14 or tecnocommercial equivalent in Philips,Crompton,Wipro & Bajaj.

Supply and fixing of LED security light fitting 25 watt with pressure dia cast housing, prismatic, polycarbonate diffuser and IP65 protection including 0.6 metre long 20/25 mm (as per manufacturer standard) dia GI Pipe in 45 degree bend shape and necessary clamping devices required at site complete all as specified and directed by Engr-in-Charge. Make: Havells / Philips/Crompton/Wipro/ Bajaj Cat part of Havells :- ENDURASUNDOWNSL 25W LED 765 PASY BOPCHLD Bajaj Cat Part No :- ENXTP30 L WHPOPCSDMT or tecnocommercial equivalent in Philips,Crompton & Wipro.

Material and labour for Sub main wiring complete with 2 runs of 4 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn through existing concealed PVC/Steel conduit and including 1 run of 4 Sqmm PVC insulated unsheathed copper conducter with multistranded copper conductor as earth continuity complete all as specified and directed. Note : Two runs of copper conductor and one run of earth copper conductor shall be measured as one length.

Supply and fixing in repair of VTPN DB suitable for Mounting MCCB as Incomer of rating 100 Amp Vertical distribution board 4 way with suitable rated bus bar having IP-43 protection and metal door including connection with aluminium thimbles as required complete all as specified and directed. Note :- MCCB will be measured and paid seperately Make : Legrand or techno commerical equivalant of Havells,Standard,Indo Asian

Supply and fix in repair sheet metal enclosure MCB distribution board. Double door single pole & neutral (SPN) 240 volts 8 way with IP-43 IK-09 protection with metal door complete with appropriate size bus bar and neutral link, complete all as specified and directed. Make : Legrand or techno commerical equivalant of Havells,Standard,Indo Asian

Material and labour for MCCB 4 pole, 415 volts,TMA type, 63 amps with breaking capacity 16KA, double door and fixed board including electrical connection as per site requirment complete all as specified and as directed. Make : Legrand or techno commerical equivalant of Havells,Standard,Indo Asian

Supply and fix MCB SPN 20-40 Amps 10 KA, 240 V connected through copper thimbles of suitable size complete all as specified and directed. Make : Legrand or techno commercial equivalant of Havells,Standard,Indo Asian

Supply and fix MCB SP 3-32 Amps 10 KA, 240 V connected through copper thimbles of suitable size complete all as specified and directed. Make : Legrand or techno commercial equivalant of Havells,Standard,Indo Asian

Material and labour for earthing with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 M deep below ground level with top edge of the plate not less than 1.5 M below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 of SSR Part I connected to earthing test point including excavation/ earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 in cover slab GI funnel with GI watering pipe 20mm dia med grade, wire mesh, protection pipe 20mm dia GI pipe light grade for earth lead upto 7.50 m long complete all as specified and directed by Engineer-in-Charge.

Material and labour in repair for earthing with and including galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground earth pit not less than 2.25 metre deep below ground level with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanised strip 32mm x 6 mm by means of nuts, bolts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No. 03 of SSR Part I connected to earthing test point including excavation/ earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate) chamber including necessary formwork / mould for fair and even surfaces, precast RCC 1:2:4 type B0 ( using 12.5 mm graded crushed stone aggregate) chamber cover slab, GI funnel, with GI watering pipe 20 mm bore medium grade, wire mesh, protection pipe 40 mm bore GI pipe light grade for earth lead upto 7.50 metre long including testing & charcoal and salt complete all as specified and directed by Engineer-in-Charge. Note : Test report shall be prepared and submitted by the contractor in triplicate duly obtaining signatures of MES JE / AGE & PMG / user. Test results are to be written in letters of 20mm height in white colour on black paint back ground.

Taking down carefully after disconnecting electrical/water supply connections and transporting to the work shop for carry out the servicing / over hauling of the storage type electric water heaters (Geysers) of storage capacity 25 / 50 litres of any make / type by cleaing the inner surface of the tank / heating element with chemical to remove the scaling / rust & reassembling the same after replacing burnt out parts and refixing on its original position including testing complete all as directed. Note :- Taking down and S & F of burnt out parts shall be measured and paid seperately.

Supply and fix repair heating element for geysers of storage capacity 25/50 litres of the following ratings as required at site including rubber washer/packing complete all as specified and directed. Make : "RECOLD /THEETA / SWARNA (a) 1/1.5 KW

Supply and fix in repair base assembly complete for geysers of storage capacity 25/50 litres i.e., "SIPHON SET" inlet, outlet, thermostat pockets with drain plugs & screws for fixing the element inclusive of clamps for holding the element with nuts & bolts complete all as specified and directed.

Supply and fix in repair thermostat stem type suitable for geysers 25 / 50 litres ISI marked complete all as specified and directed.

Supply and replace 15mm steel braded hot water pipe with two brass adopters 18" long and fixing in position for hot water/outlet connections complete all as specified and directed.

Supply and fix in repair PVC connecting with two brass adaptors 450mm long & fixing in position for cold water inlet connection complete all as specified and directed.

Supply and fix in repair stop cock brass ISI marked 15mm dia & connecting up in position complete all as specified and directed.

Supply and fix in repair Gun metal Non-Return valve 15mm dia complete all as specified and directed.

Supply and fix in repair indicator lamp rectangular / round type suitable for 25 / 50 litres geysers complete all as specified and directed.

Supply and fix in repair pressure release valve 15mm dia complete all as specified and directed.

Taking down the defective ceiling fan of any sweep and make after disconnecting electrically & mechanically and transporting to the work shop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running and comprising of the following:- (a) Servicing/overhauling the ceiling fan by thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the insulation value complete. Note :- i) Rewinding of fan shall be measured and paid seperately. (ii) Spare parts of ceiling fan shall be measured and paid seperately as supply only.

Material and labour for re-winding of ceiling fan any sweep with same guage supper enameled copper wire to maintain speed at load complete all as specified and directed.

Material and labour for painting of ceiling fan any sweep taking down vide item No 51 by applying one coat of synthetic enamel paint after preparation of surface complete all as specified and directed.

Supply only ball bearings for exhaust/ceiling fan of any sweep complete all as specified and directed. Make : SKF/NBC/FAG

Supply only GUN METAL BUSH for exhaust / ceiling fan of any sweep complete all as specified and directed.

Supply only fan condenser of following sizes complete all as specified and directed :- (a) 2.5 mfd

(b) 4 to 6 mfd, Make : Asian / EPCOS

Supply only rubber reel, nut bolts, washer, split pin complete set complete all as specified and directed.

Supply only Fan connector suitable for wire connection complete all as specified and directed.

Supply only canopy suitable for 1200mm ceiling fan complete all as specified and directed.

Taking down the repairable exhaust fan of 300 MM / 380mm sweep, any make, single phase, 230 volts, 50 hz, AC after disconnecting electrically and mechanically and transporting to the work shop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running and comprising of the following:- (a) Servicing/overhauling the exhuast fan by thoroughly clelaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the resistance value. Note :- i) Rewinding of fan shall be measured and paid seperately. (ii) Spare parts of ceiling fan shall be measured and paid seperately as supply only.

(b) Material and labour for Re-winding of exhaust fan 300 MM / 380 MM sweep, any make, taking down vide item No 61 with same guage supper enameled copper wire to maintain speed at load.

Supply only ball bearings for exhaust/ceiling fan of any sweep complete all as specified and directed. Make : SKF/NBC/FAG

Supply only gun metal bush for exhaust / ceiling fan of any sweep complete all as specified and directed.

All as per above item No- 61 but exhaust fan 450mm sweep.

Material and labour for Re-winding of exhaust fan 450 MM sweep, any make, taking down vide item No 65 with same guage supper enameled copper wire to maintain speed at load complete all as specified and directed.

Supply and fix in repair electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc ,inlcuding making Electrical / Water supply connection and additions / Alterations to Existing Brackets, testing complete all as specified and directed. Make:Havells/ V- Guard /Bajaj /C&G/ Jaquar

Supply and fixing in repair exhaust fan 250 mm sweep,single phase 230 volts, 50 Hz complete with copper wire for connection complete all as specified and directed. Make: Havells Cat Ventilair DB or techno commerical equivalent in USHA/ Bajaj/ Crompton

Supply and fixing in repair ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with new copper connection wires complete all as specified and directed. Make :Havells/ Bajaj/ Crompton/ Usha

Supply and fix Flexible twin core copper wire 2 run (P+N) of 1.5 Sqmm copper conductor and 1.5 Sqmm earth wire complete all as specified and directed. Make: Havells/ Polycab/ Gloster Note :- 2 runs of cable shall be measured in one unit length.

Supply and fix in repair electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and directed. Make : L&T or techno commercial equivalent.

Supply and fix Rigid non-metallic PVC conduit 20mm medium grade inclusive of necessary tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.

Material and labour for cleaning of water storage tank above / under ground sump by draining out complete water, scrapping the inner walls of tanks with wire brush / brooms, for removing the fungus, algae, soil, sludge mud etc complete including rewashing the inner walls of tank with fresh water to ensure complete cleaning including painting with one coat of water proof antifungal epoxy paint and writing on the outer walls of the tank with synthetic enamel paint the date of cleaned, due date of next cleaning & capacity of reservior complete all as specified and directed. Notes : (i) Consumable items such as wire brush, brooms cleaning chemicals deemed to be included in the quoted rates. (a) Water storage tank/reservior of capacity 30000 to 50,000 Gallons for fresh water in Ganeshkhind pump House.

(b) Over head Tank of capacity 100000 Gallons in Ganeshkhind.

Material and labour for painting with one coat of synthetic enamel paint by using brush to motor and pump set including cleaning and preparing surface duly scraping old paint and writing SM/MES No. complete all as specified and directed by Engineer-in-charge for following:- (a)40 to 75 HP motor

Material and labour for painting of old painted surfaces of pipe 100 to 150 mm dia including prepration of surfaces and applying one coat of synthetic anamel paint complete all as specified and directed at site.

Material and labour for painting of old painted surfaces with one coat synthetic enamel paint by using brush to sulice valve and wheel of size 100 to 200 mm dia including cleaning with chemical agent and preparing surface duly scraping old paint complete all as specified and directed.

Material and labour for Overhauling the centrifugel pump sets by dismantling the pump set,opening,cleaning,greasing including replacement of spare parts and reassembling after repairs including,metaling,grinding etc transportation, reinstalling back to position and testing complete for the following capacites of pump sets:- Note:-Spares parts replaced will be measured and paid depaterly under relevent items of the schedule as supply only. (i) 30 HP to 75 HP Pump DSM 4 RR/DSM 4 RM/DB 65/20

Supply only spares for 30 to 75 HP Pump DSM 4RR/DSM4 RM /DB 65/20, Pumps complete all as specified and directed. Make:-Kirloskar pumps (a) Shaft sleeve

(b) Shaft sleeve nuts ( set of 4)

(c) Bearing cartridge DE/NDE

(d) Bearing cover DE/NDE (set of 2) Split gland coupling

(e) Bearing cap (set of 2)Wear Ring

(f) Bearing lock nut

(g) Throat bush (set of 2)

(h) Gland packing 10MMSQ

(j) DSM 100/36 set of Gaskets

(k) DSM 100/36 set of 'O' rings

(l) Impeller 1st/ 2nd stage

Disconnecting the electrical and mechnical connection of burnt electrical motors from the site/location including transporting to and from workshop, rewinding of electrical motors by dismantling and removing the burnt out copper winding wire,cleaning the slots of stator with petrol and brushes,winding with polyster based super enameled copper wire of same guage as of original one with proper class of insulation including varnishing and heating the coil and remove the air bubbles complete,stator/rotor after rewinding,reassembling all parts including reinstalling,connection to original position and testing on full load all as shown and directed by Engineer-in-charge for capacity of motor as per following:- Note :- Spare parts to be renewed shall be measured and paid seperately as supply only. 30 HP three phase motor 415 V

75 HP three phase motor 415 V

Supply only roller ball bearing/Double ball bearing thrust ball bearing of pumps/motor of following sizes:-. (a)6309

Supply and fix in repair power contactors MNX 110 type with 2NO+2NC ,CP No.CS94137 in existing pump set strarter panel including necessary testing complete all as specified and directed.

Supply and fix in repair pressure guage range 0 to 14 Kg/cm2 with 100 mm dia with one stainless steel cock complete all as specified and directed.

Supply and Fix in repair rubber packing sheet 3 mm thick complete all as specified and directed.

Supply and fix in repair rubber bush for pin type coupling for any type of pump and motor complete all as specified and directed.

Supply and fix lead pig for repair of leaking joints complete all as specified and directed.

Supply and fix spun yarn for repair of leaking joints complete all as specified and directed.

Supply and fix lead wool for repair of leaking joints complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for taking out/laying for GI/CI pipes and geeting out in:- (a) Soft / loose soil.

(b) Hard / dense soil.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cms in soil complete all as specified and directed by Engr-in-Charge

Removing excavated materials not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

Dismantling the disturbed valve chambers and construction of brick masonary valve chamber of the following sizes(internal dimensions) including necessary earth work excavation in hard/ dense soil,PCC(1:4:8),type D2 using 40mm graded crushed stone aggregate in foundation,brick masonry of wall thickness of 230 mm in CM(1:6), rendering in CM(1:6) 15mm thick internally and externally including to a depth of 15 cm below GL,3 mm thick hinged MS iron cover as specified in IS-3950-1979 embeded in PCC with locking arrangment and painting with two coats of distinctive color synthetic enamel paint over a coat of red oxide primer, PCC(1:2:4) B1, using 20mm graded crushed stone aggregate 50 mm thick coping and locking arrangment etc all for 150/200/250 mm dia valve complete all as specified and directed:- (a) 900x900x1200 mm

(b) 1200x1200x1200 mm

Burning out leaking lead joints in position and removing of old lead as credit to contractor as per sch of credit for the following sizes complete all as specified and directed by Engineer-in-charge. (a) 80 mm dia of pipe

(b) 100 mm dia of pipe

(c) 150 mm dia of pipe

Material and labour for run lead joints for CI pipes/fittings complete with necessary jointing material such as pig lead and spun yarn,fire wood for jointing of pipes all as directed by Engineer-in-charge for the following sizes:- (a) 80 mm dia of pipe

(b) 100 mm dia of pipe

(c) 150 mm dia of pipe

Taking up or down GI water tubing including removing of all necessary connections/fittings as specified and directed by Engineer in Charge. (a) Dia of pipe 15 mm dia

(b) 20 mm dia.

(c) 25 mm dia

(d) 40 mm dia

(e) 50 mm dia

(f) 80 mm dia (Note : excavation and earth work will be measured & paid separately)

Taking up or down CI pipe 150mm dia including removing of all necessary connections/fittings complete all as specified and directed by Engineer in Charge. Note :excavation and earth work will be measured & piad separately

Material and labour for CI pipes150mm dia with spigot and socket ends centrifugally cast , Class LA, in any length any type laid in trenches / laid in floors complete all as specified and directed.

Relaying and refixing the CI//DI/MS /GI pipe after descaling / cleaning complete with the help of water & brush of the following size / bore obtained from Sl item No 115 above and connect in old / new positions, laid in trenches fixed on wall on floor including of new fittings such as bends, tee, unions, elbows, sockets etc complete all as specified and directed. (a) 15 mm dia.

(b) 20 mm dia.

(c) 25 mm dia

(d) 40 mm dia

(e) 50 mm dia

(f) 80 mm dia

Supply and fix GI tubing medium grade ISI marked fixed on wall, roof, floor complete with all accessories such as Tees union , bend ,elbow nipple reducer etc , all as required at site for branch connection including cutting threading complete all as specified and directed by Enginner-in-Charge. (a) Bore of pipe 15 mm dia

(b) 20 mm dia.

(c) 25 mm dia

(d) 40 mm dia

(e) 50 mm dia

(f) 80 mm dia

Supply and fix galvanized iron water tubing medium grade ISI marked in trenches complete with all accessories such as Tees union,bend,elbow nipple reducer etc all as required at site for branch connection including cutting threading complete all as specified and directed. (a) dia of pipe 15 mm dia

(b) 20 mm dia.

(c) 25 mm dia

(d) 40 mm dia

(e) 50 mm dia

(f) 80 mm dia

Supply and fix in repair CI sluice valve PN 1.6 complete all as specified and directed :- (a) Sluice valve 100 mm dia

(b) Sluice valve 150 mm dia

(c) Sluice valve 200 mm dia

Supply and fix in repair Foot valve ball type heavy duty suitable for 150 mm dia pipe line Make NORMAX or equivalent in Kirlosker /Upadhyay complete all as specified and directed.

Material and labour for cutting of Roads / Plinth of width not exceeds 450mm and depth not exceed 450mm and making good the disturbed surfaces as per existing adjoining surfaces complete all as specified and directed. Note: PCC will be measured and paid separetely.

Material and labour for PCC in 1:2:4 type B 1 by using 20 mm graded stone aggregate for making good road/foot path/hard standing/drain/ bldg plinth protection and foundation for motors, pumps and starters all as per site requirement complete all as specified and directed by Engr-in-Charge.

Disconnection of existing water storage tank of PVC tank at 3.0metre to 7 metre height, removal of water if any from the tank and cleaning the bottom and internal periphery of the tank by using wire brushes to remove the Mud, Algae, fungus etc without damaging the water tank and finally rinsing the tank by using chlorine/bleaching powder/altoc GP or any other simillar type of disinfectent chemical as directed by Engr-in-Charge and re-fixing in the same position complete all as specified and as directed at site. Note : Date of cleaning shall be written after cleaning in DD/MM/YY format with synthetic enamel paint after removing the earlier date if found exisitng (a) Capacity upto 1000 Ltrs

Supply and fix in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed for the following sizes at upto 10 metre height of building :- Note : All T&P required for complete the work shall be arranged by the contractor and no any extra payment will be admissible on this account. (a) for 15mm dia

(b) for 20mm dia

(c) for 25mm dia

Repair to water supply line (Fresh water) with cast iron mechanical joint for CI pipe line of size150 mm including taking out the leaked /puncture/cracked existing pipe , cutting of damaged portion of pipe through welding, making rough surfaces smooth and champhered by grinding and then connected through GI pipe jointing material adequate size complete as per site requirement. Note : Testing/commissioning the pipe line on full pressure after completing the job will be carried out and payment will made of this job if found sucess other wise the same shall be done again and no extra payment will be made on this account.

Supply and fix CI/DI fitting for spigot socketed pipes such as Bends (any type, radius an angle) Tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, `Y' junction, double branch, cross (all sockets or flanged ) collars, caps and plugs, Connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth Upto150 mm dia pipe complete all as specified and directed.

Routine maintenance consisting of normal repairs with periodical routine maintenance and testing of DG set of 75 KVA complete (i.e. Engine, Alternator etc) under GE (I) R&D Pashan including all consumables like cotton, waste cloth, kerosene oil etc. Maintenance will be carried out as and when ordered in writing by Engineer-in-Chagre, as maintenance of the following :- (a) Change or top up engine oil. (b) Check clearance of suction and exhaust valves and adjust if required. (c ) Changing of oil filter, fuel filters, screen filters assy. (d) Changing of water filter element. (e) Topping up of coolent. (f) Change of Hydraulic governer oil. (g) Tightening of all nut bolts. (h) Greasing of all points. (j) Checking of any leaking in fuel and oil lines. (k) Cleaning of fuel tank by taking out the dirt and sludge, cleaning the tank thoroughly. (j) Repair of battery terminal made of Brass with necessary brazing to cable each set of 2 NOTE 1 : Labour charges for dismantling / taking down and replacement / refixing new parts as and when required is deemed to be included in unit rate quoted. NOTE 2 : Spare parts like oil filter, fuel filter, screen filter by pass filter,Engine oil etc will be measured and paid separately as supply only. (a) 75 KVA DG Set at Pump house of Ganeshkhind Area

Supply of Engine oil 20W40 for DG set complete all as specified and directed. Make : castrol or techno commercial equivalent make of others.

Supply and top up of Premix Ethylene Glycol coolent for Engine Radiator complete all as specified and directed. Make : castrol or techno commercial equivalent make of others.

Material and labour for battery terminals made out of brass with nut bolts & washers and necessary brazing to cable complete all as specified and directed.

Supply and fix flexible braided high pressure hydraulic pressure pipe including both ends chromium plated connections check nuts and washers suitable for fuel tank to FIP complete all as specified and directed.

Supply only by pass filter element with 'O' ring suitable for DG Sets of 75 KVA complete all as specified and directed.

Supply only fuel filter primary and secondary with 'O' ring for DG Sets of 75 KVA complete all as specified and directed.

Supply only oil filter with 'O' ring for DG Sets complete all as specified and directed.

Material and labour for 2 coat of synthetic enamel paint over a coat of primer on old steel surfaces over 10cm width including scrappy surfaces complete all as specified and directed.

Supply and fix fan belt for DG Sets complete all as specified and directed. Make : Fenner / Dunlop or techno commercial equivalent.

Material and labour for cleaning of radiator,external cleaning by vaccum cleaner,petrol washing and taking out the carbon deposits from cooling fins and internal cleaning by using restor plus liquid and inhibitor corrosion of 75 KVA DG Set complete all as specified and directed by Engineer-in-charge.

Supply and fix in replacement Led Acid Battery of 180 AH ,12 V DC for DG Set complete all as specified and directed. Make: Exide/ Amron or techno commercial equivalent.

Material and labour for straight through joint,heat shrinkable,type,for HT OH AB cable including joint kits and labour complete for making joints suitable for aluminium conductor cable XLPE,3 core, 120 sqmm,22 KV complete all as specified and directed by Engineer-in-charge. Make : M seal/ Denson or techno commerical equivalent.

Material and labour for outdoor type end termination joint, heat shrinkable, type, for under ground cable including joint kits and labour complete for making joints suitable for aluminium conductor cable XLPE, 3 core, 95 sqmm, 22 KV complete all as specified and directed by Engr-in-charge. Make : M seal/ Denson or techno commercial equivalent.

Cutting the tree branches which touches the LT/HT OH lines and maintaining 2.5 metre away from centre line of HT/LT OH line span not exceeding 60 metre between poles and deposting the tree branches/leaves at 30 metre distance away from site complete all as specified and directed. Note : Any number of tree branches cut in one span will be measured as one length for payment purpose.

On load filteration of transformer oil by contineous circulation of transformer oil through mechanical filters to achive the desired dielectric strength of 35 KV for one minute at 4 mm gap complete all as specified and directed. Note: 1.Oil samples are to be collected from top and bottom of oil tank and test results to be recorded for each sample before and after filteration.

Supply and topping up transformer oil of dielectric strength 50 KV at 4 mm gap in transformers of various capacity installed in various locations . Make of Transformer oil: Savitha Notes : (a) New Transformer oil will be filled in the transformer only after filteration and dehydration of existing transformer oil of the transformer. (b) Transformer oil shall be supplied in sealed barrel with test result and test certificate.

Supply and Fixed in repair breather assembly transparent plastic body with top and bottom portion pressed with metallic cover, filled with silica gel blue in colour and suitable for fixing on existing pipe of size 15/20/25 mm dia with suitable reducers/connectors etc as per site requirement /capacity of transformer. Note : Rate quoted shall be deemed to include the cost of modification if any required to fix on existing MS Pipe.

Repair to gang operated air brake switch device upto 100 Amps,22 KV capacity including greasing/oiling of all moving contacts,replacement of nut bolts,washers of suitable sizes,unserviceable spares and jumper connections in all phases for smooth functioning of the devices all as directed by Engr-in-charge. Note : Unserviceable spares and jumper connections replaced will be measured and paid separately as "Supply only"

Supply only the following items : (a) Male contact/moving contact with blade arcing hornof gang operated AB switch devices suitable for 22 KV

(b) Female contact /fix contact jaw arcing horn for gang operated AB switch devices.

(c) Tinned copper flexible jumper 200/200 Amps

(d) Post top Polymer insulators of gang operated AB switch devices.

(e) Middle post Polymer insulators of gang operated AB switch devices.

(f) Bottom post Polymer insulators of gang operated AB switch devices.

(g) MS jumper carrier.

(h) Back connector plate.

GI pipe, heavy grade 25 mm dia made to shape for gang operating from ground.

Repairs to drop out fuse complete of upto 400 Amps,22 KV capacity including replacement of worn out nut bolts,washers,of suitable size /unserviceable spares and jumper connections for smooth functioning of the devices all as directed by Engr-in-charge. Note : Unserviceable spares and jumper connections replaced will be measured and paid seprately as "Supply only"

Supply only the following items (to be incorporated under Item No 181 above) a) Fix top contact/ contact for drop out fuse.

b) Fix lower contact for drop out fuse.

c) Post insulators of drop out fuse.

Supply install testing and commissioning in repair 22 KV outdoor type Polymer based gang operated air brake switch triple pole, suitable for verticle mounting complete , GI operating rod of suitable length for operating mechanism worked from ground level complete in both OFF and ON positions, for current rating upto 200 Amps,each pole consist of galvanised steel base HT insulators as per BSS/ISS non ferrous knife and spring loaded contacts, arcing horns of adequate section to brake magenetizing current of the transformers. All ferrous parts hot dipped galvanised and non ferrous parts tinned to withstand weather.

Supply and Fix in repair Polymer Pin type insulator of 22 KV including necessary hardware complete all as specified and directed.

Supply and Fix in repair Polymer disc type insulator, ball and socket type, white brown or green suitable for 22KV including necessary hardware complete all as specified and directed.

Supply and Fix in repair defective lightining distribution surge arrestor, non linear type MCOV, 18 KV, 5 KA with all fittings bolts nuts and washers etc complete all as specified and directed.

Material and labour for preparation of old painted steel surface of 6/4/2 pole structure HT/LT street light/HT steel tublar poles 8.5/9.0/11/13 mtr long above GL/coping including cross arms,channels,Flat iron,Clamps in LT/HT OH line by scraping with wire brush/ sand paper and applying one coat of aluminium paint including pole numbering all as specified and directed by Engr-in-charge for the following types:- a) HT 4 Pole structure 11 metre long

b) HT 2 Pole structure 11 metre long

c) HT pole 11 metre long

d) LT pole 8.5/9 metre long

Disconnecting the transformer outdoor type from HT/ LT system and opening carefully by draining out transformer oil upto HT/LT boxes for rectifying the leakage by replacing the unserviceable spare parts of capacity 50 to 750 KVA transformer, refilling the transformer oil and complete assembling after repairs including testing for any oil leakages and connecting the HT/LT system after the leakages have been rectified and tested on available electric load complete all as specified and directed. Note : Defective parts replaced will be measured and paid separately as "Supply only" under respective items here in after.

Supply only LT bushings with brass studs of existing specification.

Supply only top cover gasket set.

Supply only HT bushing with stud 22 KV of existing specification.

Material and labour for preparation of old painted surfaces of transformer, removing rusted scale/oil & painting of transformer with one coat of synthetic enamel paint of approved make duly Marking/ writing MES/SM No. complete all as specified and directed by Engr-in-charge for : (a) 160 to 250 KVA capacity of transformer.

(b) 300 to 500 KVA capacity of transformer.

Re-Stringing of HT/LT over head conductor and earth conductors, unwinding and visual testing of insulator, rewinding of ACSR and GI earth wire guard/ earth conductors rigidly with winding wire complete all as specified and directed.

Material and labour for disconnecting from existing main taking out from LT panel board for servicing & overhauling LT ACB of any make 800 to 1600 Amp, 50Hz 415V AC Draw out type including taking out existing mechanism complete with servicing of operating mechanism triping mechanism and spring charging mechanism complete to make it funtioning smoothly and including replacement of unserviceable spares and fixing in its original position with all connections and testing complete all as specified and directed. Note : Spare parts are shall be paid separately under respective items here in after, however cost of minor spares except mentioned in item no 201 to 204 below shall be deemed to be included in item rate.

Supply only Following spare parts suitable for LT ACB suitable 800A-1600 A Capacity :- (a) Main isolating contact (Male and Female) jaw type complete including fixing accessories

(b) Shunt Trip coil/ Closing coil 415 VAC suitable for 800 amps ACB

(c) Under voltage tripping divice (UVT) 415 volts

(d) Single phae CTS at rating 800/5A

Supply and fix in repair MCCB 4pole, 250 Amps, 36 KA, 415 volts, over load and short circuit protection, adjustable thermal -magnetic release type complete all as specified and directed. Make : L&T/ Legrand/ Havell's

Supply and fix in repair MCCB 4pole, 200 Amps, 25 KA, 415 volts, over load and short circuit protection, adjustable thermal -magnetic release type complete all as specified and directed. Make : L&T/ Legrand/ Havell's

Supply and fix in repair MCCB 4pole, 100 Amps, 25 KA, 415 volts, over load and short circuit protection, adjustable thermal -magnetic release type complete all as specified and directed. Make : L&T/ Legrand/ Havell's

Supply and fix in repairs Pin type, porcelain, vitreous white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100 mm height, 65mm dia suitable for 1100 volts grade including taking out existing unserviceable insulator complete all as specified and as directed.

Supply and fix in repair insulator shackle type, porcelain, vitreous, white, brown or green insulator including galvanised and mild steel straps of size 31x5mm, washers, insulator bolts, washers and nuts, size of insulator 100 mm height, 115 mm dia with 14 mm dia bolts for 1100 Volts grade complete all as specified and as directed. Make : JSI or techno commerical equivalent.

Material and labour for PCC 1:3:6 type C-2 using 40mm graded aggregate as in foundations of stays and poles, coping of poles etc complete including necessary form work weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Supply and fix in repair LED street light /road way luminaries 45 watts with pressure die cast housing heat shrink with IP 66 protection, interchangeable electronic driver high efficiency longer life, protection against high surges , high /low voltage cutoff, open/short circuit protection and high power factor LEDs as light source including fitted on existing street light pole bracket complete all as specified and as directed. Make : Havell's/ Philips/ Bajaj/ Wipro Cat part of Havells :- ENDURASUNDOWNSL 45W LED 765 PASY BOPC Bajaj Cat Part No:- ENXTP54LPOPCSDMT or tecnocommercial equivalent in Philips & Wipro.

Supply and fix in repair LED street light /road way luminaries 60 watts with pressure die cast housing heat sink with IP 66 protection, interchangeable electronic driver high efficiency longer life, protection against high surges , high /low voltage cutoff, open/short circuit protection and high power factor LEDs as light source including fitted on existing street light pole bracket complete all as specified and as directed. Make : Havell's/ Philips/ Bajaj/ Wipro Cat part of Havells :- ENDURASUNDOWNSLLOW 60W LED 765 PASY BOTG Bajaj Cat Part No:- ENXTP72LPOPCSDMT or tecnocommercial equivalent in Philips & Wipro.

Supply and fix in repairs pole junction box sheet moulded compound (SMC) type with hinged door and locking arrangement of size 140x140x100mm internal comprising, one No MCB single pole of capacity 6 Amps 240 volts and one No terminal for loop in & loop out suitable for single phase street light system including nuts and bolts and connecting up complete, MS clamp fabricated from 25x3mm MS flat iron complete all as specified and directed. Make : Sintex or techno commerical equivalent.

Supply and fix in repair Automatic Street Light Switch using NATURE SWITCH for automatic switching of Street Lights based on LUX level of Natural Light. The Sensor (Nature Switch) along with suitable Power Contactor, MCB and Support Terminals should be enclosed in pole/wall mountable Enclosure made of Rust Proof, Electric Shock Proof, Termite proof and FR grade special moulding compound (Sintex make SMC Junction box) conforming to IP54.The Contactor, MCB and Circuit Wiring should suitable enough to take load of 8 kW single-Phase load .Contactor Rating: 40.Amps ( 2-pole ).MCB (single-pole) Rating:63.Amps (2 nos.) Nature Switch: Kakatiya Energy Systems Pvt. Ltd. Hyderabad (EnC Approved) Contactor: BCH/L&T/Schneider or equivalent MCB: Havells/Schneider/Legrand/L&T. complete all as specified and directed.

Material and labour for display board with ACP Board with retro reflective film including printing and pasting on both side size of board 4'x 2.5' including fabricated with MS square pipe of size 50mm and height 3.0 m including applying two coats of black paint over a coat of primer and embedded in PCC 1:2:4 type B1 including necessary earthwork and excavation complete all as specified and directed. Note : Quoted rate should include all material like ACP board, retro film, printing of name of installation including office details and pasting on board, GI pipe, PCC earthwork complete all as specified and directed. Nothing will paid extra, a sample shall be produced by contractor for approval.

AN-ICON Engineering Technologies And Infrastructure Developments Pvt. Ltd

shakti engineering and electrical works

Sunil Constructions

R. K. Industrial Fabricators