REPAIRS TO ROAD SIDE FURNITURE AT THANE UNDER AGE B/R-I MANKHURD

Amount

M & L for repairs to potholes any depth, not exc 1 Sqm each including sweeping free from dust and mud or water, scouring sunken surfaces in roads, paths etc. cutting around edges to at least 25 mm in depth filling in screened and graded road metal, watering and well ramming (incl supply of road aggregate, chippings etc), and making good to receive BM/semi dense asphaltic concrete etc complete by applying tack coat at 5 kg per 10 sq m. putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again will rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30mm complete all as specified and directed.

M & L for preparation of surfaces of Black top surfaces by brushing with wire brushing for removing caked mud etc sweeping with brooms & finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specifed

M & L for applying evenly a tack coat with bitumen emulsion RS-1 @ 10 Kg per 10 Sqm with sprayer over existing black top surface etc complete all as specified and directed.

M&L for premix bituminous macadam (BM) (consolidated thickness 75mm or less) with 4% binder content (paving bitumen of grade VG-30) by weight of total mix prepared in hot mix plant, laying of mix with self propelled mechanical paver, duly rolled and compacted to required camber and gradient with 08 to 12 tonne power roller and vibrating roller etc complete all as specified and directed. Notes: The contractor's quoted rates shall also be deemed to include the following elements: (i) The contractor shall get the mix design done through Govt. approved Lab and the same shall be got approved from the GE before providing BM. (ii) In case of variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quantity of bitumen shall be adjusted @ Rs.32/- per Kg

M & L for applying evenly a tack coat with bitumen emulsion RS-1 @ 5 Kg per 10 Sqm with sprayer over existing black top surface etc complete all as specified and directed.

M&L for Bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.5% binder content (paving bitumen of VG-30 grade) by weight of total mix prepared in hot mix plant, laying of mix with self propelled mechanical paver, the surfaces rolled and compacted to required camber and gradient with 08 to 12 tonne power roller and tandem vibrating roller etc complete all as specified and directed. Notes: The contractor's quoted rates shall also be deemed to include the following elements: (i) The contractor shall get the mix design done through Govt. approved Lab and the same shall be got approved from the GE before providing SDAC. (ii) In case of variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quantity of bitumen shall be adjusted @ Rs.32/- per Kg .

M & L for thermoplastic road marking paint, white or golden yellow, conforming to BS-3262 / 1989 applied on road/pavement as in lines, dashes, arrows, letters etc, 10/15 cm in width & of thickness not less than 2mm, with and including combination of retro-reflective glass beads 250-300 gm/ Sqm all as per manufacturer's instructions complete all as specified & directed.

S&F metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. Make : Dark Eye Guide post Cat No. Da 74 or equivalent as approved by the GE.

S&F in repair Cat Eye solar reflective type of metal body alloy of size 100mm*100mm*20mm with PAMA striplens reflector of model No. DA 972 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed

S&F in replacement convex mirror made of polycarbonate of size 80cm dia (Make : Sun eyes Cat No SE-207 or equivalent as approved by the GE) complete including MS pipe, medium grade, 32 mm bore, 2.00metre high (duly painting of external steel surfaces with 2 coats of synthetic enamel paint over 1 coat of red oxide primer) with suitable fixing accessories such as nuts, bolts, washers etc and inserted in PCC 1:2:4 type B-1 (using 20mm graded aggregate) block of size 300mm x 300mm x 500mm with necessary excavation and disposal of soil as per site requirement, complete all as specified and directed.

S&F in repair for portable speed bump PVC spread breaker, 250x300x50mm size including provision of anchor bolts, epoxy morter grout and design, complete all as specified and directed. Make : Pioneer manufacturers and suppliers, Product Code 20 or equivalent of Make: Dark Eye as approved by the GE.

S&F Solar cat eye aluminium alloy shall (100% water proofing design acccording to 65 )of size 125*125*25 mm(shank 65mm) of high efficiancy Mano rystafie sol;ar panel 2.4V/.3 watt one NI-ed rechargable battery (1.2V/1600MA)consisting of super bright LED with 10000 to 18000 mcd completed as per manufactures instructions etc. all as specified and directed. Make:3M290 Series or of make Avery Dennison C-80 Series or ARSDM-01 as approved by the GE

m/s ashoka enterprises

M/s Qureshi Construction Co

RS Enterprises

AMBICA ENGINEERING

POOJA ENTERPRISES