MISC REPAIR INCLUDING PLASTER, ROOF TREATMENT TO FLOORS IN THE AREA OF MANDIR MARG, MALL ROAD IN ZONE-I UNDER AGE B/R-I UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor include cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface etc. on wall finished even and fair without using extra cement, all as specified .

M&L for 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface etc. on ceiling finished even and fair without using extra cement, all as specified .

M&L brick work with sub class 'B' st or curved on plan exc 6 m mean radius built in cement mortar 1:6

M&L for 1st/Premium quality glazed ceramic digital coloured tiles with highlighter concetp in matching pattern of size 1200X 600X 7 to 8 mm thick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles over and incl 15 mm thick backing coat in CM (1:4) including dismantling of floor, hearth or wall tiling complete all as specified and directed.

M&L for Vetrified ceramic tiles ultra charged ( dark shade) 10mm thick (square/rectangular) area of each tile exc 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6) including dismantling of floor, hearth or wall tiling complete all as specified

S&F Suspended Gypsum board ceiling works in decorative steps including vertical/sloping members includes with GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) alongwith perimeter of nailing screw fixed in brick wall/RCC with the help of nylon seelves and screws at 610mm centre, then suspending GI intermediate channels of size 45mm (0.9mm thick with two flange of 15mm each) from the soffits at 1220mm centre with GI cleat and steel expansion fasteners, ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm centres, 12.5mm tapered edge gypsum board conforing to IS 2095 (1982) is then screw fixed to ceiling section with 25mm drywall screws at 230mm centre,. Screws fixing is done mechanically either with screw driver or drilling machine with suitable attachment finally the board are to be jointed and finishing the tapered and square edges of the boards are to be joints compound, joint fiber tape including dismatling of old false ceiling any description. (Note :- Details of fixing & material will be got approved by GE before commencement of work).

S&F Aluminium alloy powder coated (50micron) anodised auminium door frame section 100xmm x 44mmx2mm thickness ,shutters of aluminium section ofsize 85mm x44mm x2mm thick Top rail and both styled of size 100 mmx44mmx2mm thick lock rail and bottom rail of xize 115mm x 44mm x2mm thick incl aluminium anodised snap beading and rubber packing & 5.50 mm thick froasted designer glass(ass approved by GE) incl 100 mm long alm butt hinges 04 Nos each leaf 200mm long tower bolt ,.200 mm long fancy ryper alm handle -02 Nos on each leaf ,4 leaver brass 100mm long mortick lock & doubble action floor door spring heavy duty suitable to 1M wide shutter for each leaf, complete all as specified and as directed.

S&F aluminum anodised powder coated grill section 5 to 6 mm of square/dimond shape having picth size of mesh 75x100 mm etc complete all as directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames Chowkhat of size 45 x 70 mm comprising Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) abricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete inluding dismantling of existing frame as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). (Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extrapayment on this account shall be made).

Providing and fixing 35 mm th factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including taking down of exisitng shutter,all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately

S & F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified.

S& F 16-18 mm wood polymer composite panel(WPC) wall panneling including fixing arrangement,corner ,top, bottom moulding complete all as specified including dismentling of existing wall panneling

S&F in repair fancy type Curtain rods decorative type stainless steel 25mm nominal dia of approved quality(Make VISTA) (1mm wall thickness) including fixing of two number decorative brackets fixed in brick/concrete wall, Two number of latto on both ends of curtain rods ( The length of each curtain rod will be 1.00m to 1.80m long) complete all as directed and specified.

Providing and fixing glass reinforced concrete (G.R.C) panels of approved size pattern,design,thickness and colour of M/s GRC Terra Firma make or equivalent .Quart,fine silica sand,Alkali resistant glass fibre manufactured by NEG or equivalent ,super plasticizers manufactue by NEG or equivalent,super plasticizers mamufactured by BASF or equivalent, polymer manufactured by Basf or equivalent and UV resistant synthetic inoganic pigment shall be used for pigmentation manufactured by Bayferrox(Germony)b or equavalent .The material casting shall be used for pigmentation manufactureed by Reckli or equivalent.The fixing of screen shall be Dry fixing i.e to be done with stainless steel (SS-304) L shaped brackets ,fasteners and pins complete as directed.

S&F in repair vitreous china counter type wash basin under counter Designer type size 450x450x170 mm fixed under granite slab with all fitting and fixture complete all as specified.(Make Jaquar Model No: JDS-WHT-25905)

Fabrication & fixing of kitchen cabinet & wardrobe/cupboard made out of 15 to 18 mm thick PVC board laminated sheet including providing cabinet for keeping/basket/cutlery basket with handles complete Make: Rajshree or equivalent all as spd and approved by Garrison Engineer.

Providing & Fixing of factory made kitchen cupboards (lower and upper unit) made up of 18mm thick HDHMR board (century/Action tesli/kitply) with both side company pasted (any colour) mild and 10mm HDHMR board with white colour on both sides, front shutter/ partitions shall be made of machine cut 18mm MDG board with laminates (merino/century/kitply) duly lipping (edge bending) complete all at the factory with G profile handle of approved colour and soft closing hinge (Hettich/Godrej/IPSA). (Note: No edge bending will be allowed at the site (Measurement shall be of front face only)

S&F Stainless steel basket (plain) of size 370mm x 485mm x 150mm made of min 4mmdia stainless steel wire approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat art No 6121 or equivalent in IPSA/Hettich as approved by Engr-in-Charge).

Stainless steel thali basket of size 370mm x 485mm x 200mm made of min 4mmdia stainless steel wire of approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 6136 or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).

S&F in repair Vanity box of HDHRM of size 580x450x680mm with mirror cabinet of size 500x700mm with table top basin complete all as specified and as directed. (Make: Amara in Parryware Main Cabinet C896146 Mirror Cabinet C896C46 or equivalent in Kohler or Marc).

S&F Stainless steel Cutlary basket of size 370mm x 485mm x 100mm made of min 4mmdia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 6132, or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).

Supply only Stainless steel bottle full out of size 50cmx40cmx16cm in two tier made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20'' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge (Make: Godrej or IPSA/ Hettich as approved by Engr-in-Charge).

M&L for 10 mm thick tinted toughned glass (Designer type) for steel railing work partition including all fitting and acceessories with stainless steel brackets, as per approved design complete all as specified.

S&F oval type Brass handles, cast type,polished bright 150mm size.

M&L for 100mm Brass barrel tower bolts ISI marked with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed by Engr-in-Charge.

M&L for 2mm thick Fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc including dismantling of old sheet of any description complete all as specified and directed by Engr-in-Charge.

M&L PVC pipe in repair 110mm bore single socketed in any length with rubber ring joints complete all as specified and directed by Engineer- In- charge.

M & L PVC bend in repair 110mm bore any radius complete all as specified and directed by Engineer- In- charge.

S & F 1st class hardwood chowkats and frames Plain, solid, straight, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified.

Preparation of new wood or wood based surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint, over a coat of primer complete all as specified and as directed.

Preparation of new steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing; frame work for water tanks and similar work conforming to Fe 290 Gde-E-165 all as specified .

S&F 105mm x 60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed as per SSR Part-I complete all as specifed and directed by Engr -in- Charge.

S&F 125mm x 60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed as per SSR Part-I complete all as specifed and directed by Engr -in- Charge.

S&F Factory made 2nd class hard wood ,35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F Factory Made flush shutter 30 mm thick solid core construction with block board core and ply wood faced pannels commercials type on both sideswith decorative rubber beading complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR Part-II 2004.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement coplete as per specification and shown on drawing SSR Part-II (2020).

S&F Ist class hardwood as small fittings n exc 200cu cm each such as brackets of any type , latch and hinge blocks, shaped door and window stops and the like incl, all necessary labours and butt hinge of size 40mm complete all as specified as directed.

S&F MS butt hinges 100mm long medium weight cold rolled mild steel etc

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified .

Extruded aluminum alloy handle, fabricated type, anodized 125mm size, fixed in repairs complete.

S&F Aluminium alloy, anodised, sliding door bolt 200mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

300 mm, Mild steel ordinary rat tail rod pattern springs of brass including roller and roller plate, fixed in repairs complete.

S&F Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire of average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staple

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/metal pins complete.

S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3.00mm thick all as specified

All as per item No 54 above but frosted glass.

Dismantling boarding, any description, fixed in any position with screw complete

Supply and fix projecting type soft self closing stainless steel hinges suitable for kitchen cubboard size 30 mm

S&F magnetic catches with steel body ‘H’ type, fixed to kitchen/cupboard shutter complete.

S&F, 75mm Long polished extruded brass Handle fixed with screw.

S&F,50 mm knob bright polished hard wood fixed with screw.

S&F Hasp and staple 125mm size, safety type, aluminum anodised including bolt to hinge plate, fixed in repairs with screws complete.

S&F Rubber door seal 32mm wide with Aluminium strip of size 19mm wide fixed with machine steel screw with washer complete

Taking down existing ceiling of any type and any description and provn of E-board 4mmthick self design type tiles ceiling on GI Powder coated channel/Tee/Grid of make(Armstrong or equivalent) frame work with the following specification including cutting holes to brick wall built in cement mortar & making good in CM 1:3 or cement concrete 1:2:4 type BO as required :- (a) Plugging to wall around the rooms and supplying & fixing GI Powder coated angle of size 25x25x1.0 mm (b) 1.60mm dia GI wire suspenders with adjustable clamps including fixing to ceiling dash free fasterers (c) 25mm x 25mm x 1.5mm GI Powder coated tee as in main & cross members at 595mm c/c supported suspenders alongwith adjustable clamp to maintain level . (d) E-board 4mmthick self design type ceiling tiles of size 610mm x610mm confirming to relevant IS in squares of GI Powder coated Tee with clips made to shape. Shade and pattern of E- board shall be as approved by GE.

M&L for preparation of old plastered surface of wall and applying two coat of Designer wall paper roll /Texture paint (Approved Design and colour) over a coat of priming coat including 2-3 mm thick wall care putty incl removal of existing treatment on surfaces of walls by scrapping down with mechanical grinder complete all as specified and directed.

Taking down cement plaster / duster bed PCC of Column, chajja, Parapets of roof, facia, drops etc and making good with cement plaster 10mm thick in CM 1:3 with PCC 1:2:4, (average thickness of PCC 25mm) as required, brushing neat cement slurry with 3.0kg of cement per sq. metre including necessary form work and scaffolding upto 4th floor including fixing of wire netting where required to match the existing surfaces complete all as specified.

S&F stainless steel 15 mm square bar as in balcony railing, design & pattern as approved by GE, complete all as specified and directed.

S&F stainless steel square hollow section (40x40mm & 40x20mm) as in balcony railing, design & pattern as approved by GE, complete all as specified and directed.

Vitreous china floor mounted toilet one piece type (white) including connection in drain etc incl ,plastic water closet seat cover, CP Jet sprey and P or S trap, fixed in repairs, complete all as specified and as directed. Make : Hindware Cat Part No 192055 or equivalent in Jaquar/Somany/Cera as approved.

Vitreous china wall mounted toilet one piece type (white) including connection in drain etc incl ,plastic water closet seat cover, CP Jet sprey and P or S trap, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Solo Series Cat Part No - SLS/WHT/6851PL80PP).

S&F in repair vitreous china wash basin, white, flat back including full pedestal, size 560x415x200mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. (Make : Jaquar continental series - Cat Part No- CNS-WHT-801 or equivalent in Cera/ Parryware)

S&F in repair vitreous china one piece counter top wash basin, white , of size 615 x 415x150mm including coupling, bottle trap/waste pipe complete all as specified and directed. (Make : Jaquar D ARC Series-DRS-WHT-37602 or equivalent in Cera/Parryware).

S&F Brass CP basin mixer single lever without popup waste with 450mm long braided hoses for mixing hot and cold water fixed as per manufacture's manual, suitable for 15mm bore GI pipe joints to GI pipes or unions complete all as specified and directed. (Make : Cera Cat Part No F1005451/ Hindware Cat Part No F-360011/ Jaquar Cat Part No ARI CHR 39001B or as approved by GE.)

Taking up or down steel tubing and connections 15mm bore and removing from site complete.

Taking up or down steel tubing and connections 20mm bore and removing from site complete.

M&L Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete.

All as per Srl item No 75 but 20mm bore complete.

M&L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sqm of the vertical surface of the sub structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified

M&L Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified.

M&L Treatment of soil under existing floors using enulsion @one liter for hole 300 mm aport including drilling and plugging 12 mm dia holes with cement mortor 1:2 to match the existing floor complete all as specified.

S&F Fiber Glass Reinforced Plastic (FRP) Door Frames of cross section 90mm x 45mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame complete all as speified and directed. (Note : Colour and pattern shall be approved by GE).

S&F 30 mm thick Glass Fibre Reinforced Plastic (FRP) paneled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames complete all as specified and directed. (Note : Colour and pattern shall be approved by GE).

S&F SS/Aluminium anodized butt hinges 100mm long medium weight cold rolled mild steel etc

S&F SS /Aluminium anodizedbarrel tower bolts of extruded section with 150 mm long bolt, all as specified .

S&F SS /Aluminium anodized handle cast type of extruded section 125 mm long fixed with screws.

S&F SS/Aluminium anodized sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

S&F in repair fancy type chromium plated brass bib cock nozzle with flange with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete Make : Prayag Cat Part No 7305 or equivalent in Jaquar/Somany/Cera as approved..

S&F in repairs CP Health faucet including flexible pipe of 1 m length fixing to 15m dia pipe with brass check nut complete all as specifed and directed. (Make- Cera Cat Part No F8030103/ Hindware Cat Part No F160068 CP/ Jaquar Cat Part No-ALD-573).

M&L Wire brushing and cleaning top surface of tiles, cement concrete, including flashings and junction of parapets including taking out old membrane/grass roots/vegetation etc., from existing roof surfaces and cleaning the surface after drying from dirt, mortar, dust mortar buds, algae and all other foreign matter and brushed and wiped, complete all as specified and as directed.

M&L for 10 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) with WPC (WPC shall be measured and paid separately)

Supply only liquid water proofing compound and mixed as per manufacturer's instructions, complete all as specified and as directed.

Applying evenly a tack coat of industrial bitumen 85/[email protected]/Sqm to the cleaned concrete surfaces (before laying APP or after laying APP under item as under), complete all as specified and as directed.

Providing APP modified Polymeric five layered membrane with central core 100 micron high molecular high density polyethylene film. Minimum weight of membrane will be 3.6 Kg/Sqm. APP membrane will be laid across the slope from lowest line of roof towards ridge with over laps of 75mm in length side and 100mm on the width side of membrane including one coat of bitumen primer as per manufacturer instructions and applying one coat of aluminium painting complete all as specified and as directed.

S&F in repair Wall mixer 3 in 1 inlet system with provision of both shower (hand shower and over head shower) complete with suitable long bend pipe connecting leg ,CP flange etc complete all as specified and as directed. directed. Make : Jaquar continental series - Cat Part No- CON-281KN

S&F in repair Sink mixer with regular swinging spout (wall mounted model) with connecting legs & wall flanges) for 15 mm bore, fixed in repairs, complete all as specified and as directed. (Make : Jaquar continental series - Cat Part No- CON-309 KNM or equivalent in Marc/Kohler).

S&F in repair fancy type angle Stop valves cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipes or for unions, 15mm dia of pipe, complete.

Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete.

S&F in repair vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' or 'S' trap complete all as specifed and directed.

S&F in repair Plastic water closet seat cover black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device, complete.

S&F in repair fancy type chromium plated long body Bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore icluding CP wall flange complete Make : Jaquar continental series - Cat Part No- CON-107KW or equivalent in Marc/Kohler.

S&F in repair Center hole basin mixer 15mm dia chromium plated brass with costed swinging spout including plugging and securing to walls,complete.Make : Jaquar clarion series - Cat Part No- CQT-23167B or equivalent in Marc/Kohler

S&F in repair CP Toilet roll holder with flange fixed in position complete all as specified .

S&F in repair PVC in connection 15mm dia and 600 mm long with 2 Nos PTMT nuts, in repairs complete.

S&F in repair PVC (SWR) floor trap, plain with grating (waste hole/plain type) including jointing with solvent cement, 75 to 100 mm mm diameter of outlet, all as specified.

S&F in repair Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specifed and directed.

S&F in repair Corner Glass Shelf of size 225mm x 225mm including screws and bracket fixed in position, , complete all as specified and as directed

Removing existing paint by scrapping with TruCare Wall Sander: L01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pas of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labour on wall/ceiling surface complete all as specified.

Providing and applying two coats of smooth acrylic emulsion with rich matt finish (interior grade) having voc less than 50 grams per ltr complying leed criteria @ 1ltrs (undiluted)/10Sqm diluted with water in 2:1 ratio applied over a coat of 2mm putty and a coat of primer over priming coat. Allow 6-8hrs to dry the surface for painting of subsequent quotes etc by skilled labour on wall/ceiling surface complete all as specified..

Preparation of old decorated internal wall/ceiling surface by sand paper of required sizes, filling in wall care putty in potholes existing or created again sand papering thus prepairing surface smooth to recieve further finishes, complete all as specified and all as directed.

Applying two coats of oil bound distemper on prepared surfaces of walls, complete all as specified and directed. (Note : Finishing coat to applied with roller).

Applying one coats of Oil Bound distemper on ceiling surface complete all as specified and directed.

Preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches,Sockets, holders,ceiling roses,light fitting regulators etc ( to be measured separately) and making good the disturbed surface all as directed.

M&L for point wiring with single core fire retardant low smoke PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) connected to common earth dolly and drawing through existing surface/concealed conduit pipe and in existing MS box/Metal Flush box covered with existing hylem sheet / modular cover plate for mounting switches, sockets or fan regulators etc for the following :-

One light point/ fan point/ bell point controlled by one switch

One socket outlet 5 Amps controlled by one switch on same board

One socket outlet 5 amps controlled by one switch on independent board

All as per item No.114 here in before but wiring with 2.5sqmm copper wire and 2.5sqmm earth wire for socket out let on independent board.

S&F in repair switch piano flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F in repair switch piano flush type, 6 amps two way,SP,230 volts AC all as directed.

S&F in repair switch piano flush type, 16 amps one way,SP,230 volts AC all as directed.

S&F in repair socket outlet 6 amps 5 pin , all as directed.

S&F in repair socket outlet 6&16 amps 6 pin all as directed.

S&F in repair piano type Step fan regulator, 120 watts single/ double module all as directed.

S&F in repair modular switch flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F in repair modular switch flush type, 16 amps one way,SP,230 volts AC all as directed.

S&F in repair modular switch bell push flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F in repair modular socket outlet 6 amps 5 pin 2 module all as directed.

S&F in repair modular socket outlet 6 & 16 amps 6 pin multipurpose combined 2 module all as directed.

S&F in repair modular Step Fan regulator, 120 watts single / double module all as directed.

S&F in repair Modular white cover plate with frame 1 module all as directed

S&F in repair Modular white cover plate with frame 2 module all as directed

S&F in repair Modular white cover plate with frame 3 module all as directed

S&F in repair Modular white cover plate with frame 4 module all as directed

S&F in repair Modular white cover plate with frame 6 module all as directed

S&F in repair Modular white cover plate with frame 12 module all as directed

S&F in repair Modular Metal Flush Box 1/2 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 3 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 4 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 6 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 12 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

Supply and fixing in replacement of Ceiling rose, insulated body, 3 terminal, 240 volts complete all as specified and as directed

Supply and fixing in replacement of electric bell of DINGDONG type, 6 Amps, 240 volts, single pole and making all necessary connections complete all as directed.

Material and labour for replacement of submain wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4 sqmm( same specification ) as earth wire in existing PVC conduit complete all as directed.

Material and labour for replacement of submain wiring complete with 2 x 10.0 sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 10 sqmm( same specification ) as earth wire in existing PVC conduit complete all as directed.

Material and labour for replacement of submain wiring complete with 2 x 16.0 sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 16 sqmm( same specification ) as earth wire in existing PVC conduit complete all as directed.

Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

Supply and fixing in replacement Isolator SPN 63 A including connections complete all as specified

All as srl item No 145 here in before but of 63 amps capacity and TPN type.

All as srl item No 145 here in before but of 100 amps capacity and TPN type.

Supply and fixing in replacement of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed.

Supply and fixing in replacement of PVC casing & caping (ISI marked) 20 mm width double lock type inclusive of all fittings such as tees, bends, elbow, etc and all fixing accessories such as couples,PVC Rawal Plugs, saddles, etc complete all as directed.

Supply and fixing in replacement of PVC casing & caping (ISI marked) 25 mm width double lock type inclusive of all fittings such as tees, bends, elbow, etc and all fixing accessories such as couples,PVC Rawal Plugs, saddles, etc complete all as directed.

S&F in replacement of rigid non metallic PVC conduit 20 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete surface mounted / concealed and making good the surface all as specified and and as directed.

S&F in replacement of rigid non metallic PVC conduit 25 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete surface mounted / concealed and making good the surface all as specified and and as directed.

Supply and fixing in replacement of wall light fitting fancy type metallic frame with fancy glass suitable for LED lamp complete all as directed.( as per sample)

Supply and fixing in replacement of LED bed side light, 5/6 Watts, wall mounted fancy type with flexible cord and switch and making all electric connections complete all as specified and directed. ( as per sample )

S & F in replacement LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watts, cool/warm white as per site requirement complete all as specified and directed.

S & F in replacement of LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 10 Watts, cool/warm white as per site requirement complete all as specified and directed.

Supply and fixing in replacement of LED ceiling light fitting 15 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.

Supply and fixing in replacement of LED ceiling light fitting 10 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.

Supply and fixing in replacement of LED ceiling light fitting 6 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.

Supply and fixing in replacement of LED post top lantern fitting powder coated aluminium die cast and spun aluminium with clear/opal diffuser 25 Watt incl LED driver with gallary suitable for mounting on 32/40 mm GI pipe including necessary electric connections complete all as directed.

S & F in replacement of energy efficient LED fittings 45W LED suitable for building security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed.

Supply and fixing in replacement of area lighting LED flood fitting 120W complete all as specified and as directed.

Supply and fixing in replacement of street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

Supply and fixing in replacement of Ventilating fan 250 mm sweep plastic body type including self cosing louver and making all electric connections depositing the old U/s item to MES store yard complete all as directed.

Supply and fixing in replacement of Ventilating fan 200 mm sweep plastic body type including self cosing louver and making all electric connections depositing the old U/s item to MES store yard complete all as directed

Supply and fixing in replacement of Wall Mounted Fan 400 mm sweep plastic body type including making all electric connections and depositing the old u/s to MES store yard complete all as directed.

Supply and fixing exhaust fan upto 300 mm sweep metalic body type and making all electric connections complete all as directed and depositing the old U/s item to MES store yard.

S&F Steel fastneer of 4" long and 8mm dia with Nuts & washer complete all as specified and as directed.

S & F in replacement of MCCB, 415 volts, three pole of cap 100/125 Amps, 10 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader / thimbles of suitable size and making connections complete all as directed.

All as per item No. 169 here in before but of capacity 160 Amps, 25 KA.

All as per item No. 169 here in before but of capacity 200 Amps, 36 KA.

Taking down old unserviceable LT U/G cable any size and core complete all as specified.

S&F XLPE insulated armoured heavy duty U/G aluminium conductor cable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and overall PVC sheathed of size 10 Sqmm 2 core.

All as per item sl No 173 but 16 sqmm, 2 core.

All as per item sl No 173 but 16 sqmm, 4 core.

All as per item sl No 173 but 25 sqmm, 4 core.

All as per item sl No 173 but 50 sqmm, 3 1/2 core.

Excavation in trenches in soft / loose soil not exceeding 1.5 meter depth and not exceeding 1.5 meter wide and getting out including trimming of sides complete all as directed.

Material and labour for brick protection to cable using old size class 'B' bricks, laid flat, dry butt jointed, laid lengthwise perpendicular to the axis of cable complete all as directed.

Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as directed.

Removal of excavated material n exc 50m and depositing n exc 1.5m above starting point complete all as specified and as directed..

M&L Cement concrete in foundations, filling and mass conc in ratio 1:3:6 type C2 with 40mm stone graded complete all as specified.

Supply and fix Industrial Switchgear Busbar Chambers, current rating 100 Amps, 4 Way with 04 Nos copper busbar complete all as sfd. Make : Havells/Legrand/ Siemens/L&T

Supply and fix Industrial Switchgear Busbar Chambers, current rating 200 Amps, 4 Way with 04 Nos copper busbar complete all as sfd. Make : Havells/Legrand/ Siemens/L&T

Supply and fix in replacement of Sheet Metal MCCB box with top cover suitable for fixing MCCB, 3/4 Pole Upto 400Amps. Note : MCCB will be measured and paid separately.

S&F of MCB DB confirming to IP 43 - IK 09 with double door, SPN 12 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.

S&F of MCB DB confirming to IP 43 - IK 09 with double door, SPN 08 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.

S&F of MCB DB confirming to IP 43 - IK 09 with single door, SPN 04 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.

Supply and fixing in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed. Note:- MCCB & MCBs will be measured and paid separately

Supply and fixing in replacement of Geyser 25 ltre capacity vertical type with steel tank and glass inner linen , 5 star rating complete including taking down the old u/s geyser and depositing to MES store yard complete all as specifed and directed.

Supply and fixing in replacement of steel wired connection 600mm long and C P brass adopter 10 mm dia with washer for geyser of any type/Make and capacity complete all as directed.

Supply and fixing in replacement of high pressure booster pump with 8 ltr capacity pressure tank, coupled with electric motor of capacity 0.93/1 HP, 230 volts, single phase, 50 Hz incl. Pressure Guage, Pressure switch & connecting accessories of GI i.e bend, nipple, socket, tee of requisite size etc incl cutting of existing pipe complete all as directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in staps, jambs, pillers, window-cills, cooking platforms and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as spd over and incl 15mm thick screed bed in CM (1:4) incl dismantling.

Providing and fixing 18mm thick MDF board with approved lamination all machine cut & pasted, lipped (edge bending) factory made used as shutter along with all soft close hardware (Hettich) required and frame to cover area under WHB/Sinks as directed on ground.

Vipul Construction

VIKRANT CONSTRUCTION CO.

M/s Shubh Enterprises