Repairing of Over Head Tank filtration plant and renewing of water supply distribution line and installation of Deep Tube well at I/A Rani under Up gradation of Industrial Area Rani project Gr No V

Amount

Piping Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed. A) G.I. pipe with GI fittings a) TATA / SAIL (Medium) v) 40 mm diameter(Distribution line)

viii) 80mm diameter(Distribution line)

vii) 65mm diameter (For Road Crossing)

x) 125mm diameter(For Road Crossing)

CI D/F SLUICE VALVE WITH CAP/WHEEL AS PER IS 14846/2000 PN 1.0 WITH ISI MARKING (a)50mm diameter

(c)80mm diameter

(d)150mm diameter

B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) FOR FILTER vi) 50mm diameter

Supplying and Placing of filter gravel of uniform size and shape without flaxy shape free from dust, clay, soft grains, dirt and other foreign materials, washed and screened to different sizes as given below as per IS 8419(Part I): 1977 all complete as directed. (c) Size from 13mm to 25mm

(d) Size from 33mm to 40mm

Supplying and Placing of filter sand of hard and resistant quartz, uniform size and shape free from dust, clay, soft grains, dirt and any other foreign materials including inorganic salts and organic substance, washed and screened having uniformity coefficient between 1.3 to 1.7, effective size between 0.45 to 0.70 mm, ignition loss not exceeding 0.70% by weight, soluble fraction in Hydrochloric acid not exceeding by 5% by weight, silica content not loss than 90% specific gravity between 2.55 to 2.65, weaving loss less than 3% as per IS 8419(Part I): 1977 all complete as directed

Labour charge for cleaning and lifting of filter material with stacking of materials at nearest suitable site as directed by Deptt.

BEAMS AND JOISTS Steel work riveted and/ or bolted/ riveted in built up sections, frame work including cutting, hoisting, fixing in position and applying a priming coat of red- lead paint up to 4.6m height above plinth including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. a) In beams and joists with connecting plates/ angle cleats MS PLATE(6MM)

PAINTING ON STEEL AND OTHER METAL SURFACE Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Extra over item no.13.7.4 and 13.7.5 for every subsequent coat of paint. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Installation of Deep Tube Well- Labour for test boring with 40mm (internal) dia G.I. pipes including keeping surplus of earth and every 2.00 m after first 3.00 m depth and delivering the same in nerest P.W.D. camp in the small tin container (Container, scaffolding, tools etc. will have to be arranged by the contractor at his own cost)

Preparation of site for placement of the drilling rig including excavation of mudpit ,circulation drain, collection chamber etc all complete as directed.

Movement of rig of the drilling site including cost of POL all complete as directed.

Transportation of all ancillary equipments,camp materials,welding set, rig accessories etc including cost of POL all complete as directed . b) Beyond 100 m

Transportation of all store materials like pipes, strainer, cone,socket,clamp,bentonite etc including cost of POL all complete as directed . b) Beyond 100 m

Transportation of air compressor including cost of POL all complete as directed . b) Beyond 100 m

Construction of temporary accommodation for drilling staff and dismantling after completion of the work as directed.

Boring in soft soil /normal clay/sandy soil by bit of size either 5.5/8 or 6.7/8 or 7.7/8 inch and collecting sampleor soil at every 3.00 m depth in sample boxes with the distinguishing marks including arranging and carraiage of necessary boring materials------------- etc all complete as directed.

Boring in hard /pebble/gravel by bit of size either 5.5/8 or 6.7/8 or 7.7/8 inch and collecting sampleor soil at every 3.00 m depth in sample boxes with the distinguishing marks including arranging and carraiage of necessary boring materials------------- etc all complete as directed

Re-Boring in soft soil /normal clay/sandy soil by bit of size either 8.1/2 or 9.5/8 or 12 inch from either 5.5/8 or 6.7/8 or 7.7/8 inch all complete as directed.

Re-Boring in hard /pebble/gravel by bit of size either 8.1/2 or 9.5/8 or 12 inch from either 5.5/8 or 6.7/8 or 7.7/8 inch all complete as directed.

Extraction of drilling pipes/bits against skin friction at the end of each day and after completion of the operation including washing of thee bore hole all complete as directed

Lowering/sinking of well assembly including welding of pipes joints for 200 mm dia G.I./M.S. casing pipe, strainer all complete as directed

Developing of the D.T.W. with air compressor, Make-Kirloskar/Cumins all complete as directed

Supplying and packing pea graval around the periphery of casing including screening, washing etc. all complete as directed

Cost of MS Pipe including GST, IT, L.Cess & Contractors profiting etc. 200 mm dia of 8mm thick

E.R.S MS slotted strainer

plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. 50 mm dia.

Supplying including installation of submersible type water supply motor pumpset with all accessories including panel board on C.C. foundation of Proportion 1 :2:4 jammed with M.S. Nuts and Bolts wire rope submersible cable without suction G.!. Pipe including making necessary connection etc. as reqd. complete 3 H.P. Three Phase

Supplying including fitting -& fixing of water supply motor pump set centrifugal type complete with all accessories C.C. foundation of Proportion 1 :2:4 jammed with M.S. Nuts and Bolts including D.O.L. Starter and making necessary connection etc. as reqd. complete 2 H.P. Single Phase (5 stage)BE AO 1150 K or Equivalent

Wiring for sub - main with insulated (ISI or approved) HFFR Copper Conductor Cable single core in recessed conduit, 2.0 mm thick with earth continuity as directed by the department. 2 x 4.00 sq mm + 1 x 2.5 sq mm with 19 mm dia, 2.0 mm thick rigid PVC pipe

Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 3P MCCB (Ics=Icu, adustable Ir setting 0.7-1) ( without enclosure) of the following capacity complete with making necessary connection as specified and directed by the deptt. [Legrand/Merlin Gerin/ Hagger make] 1.35/36KA 415V 50 Hz 3P MCCB a) 16A

Supplying fitting and fixing gun metal check valve including necessary threads to pipes. a) 50 mm dia (Heavy type)

Flushing, clearing, washing and watering of the tube well

Labour for erecting and placing PCVC Tank over the stagging up to a height of 5.00m complete as directed.

MS UNIQUE CONSTRUCTION AND SUPPLY