Loading…
Loading…
Tender Value
Refer Docs
Closing Date
25 May 2026, 2:30 pmClosed
Single Packet
Normal Tender
No
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
Expenditure
General
51
2 conditions · 1 needing a document upload
(a) Firms must have satisfactorily executed/supplied tendered item [OR] for the items having description, but of different sizes/ ratings/capacities at least for a minimum of 20 percent of the total tender quantity to Railways/ Central / State Govt Organization / PSU / Public Listed Company, during 3 previous financial years and current financial year up to date of tender opening in a one single purchase order for consideration of BULK orders. (b) If such past performance level is lower, then the offer may be considered for placement of developmental order not exceeding 20 percent of the net procurable quantity. (c) Tenderers, who have no past performance as above, may also be considered for developmental orders. For consideration of such developmental orders, such tenderers must enclose along with their quotation, details of M&P testing facilities, QAP [if available], Technical manpower/financial status available with them and MSE/NSIC registration certificate for same/similar items. (d) Firm must enclose successfully executed PO copies, R.Note copies, CRAC details, Inspection Certificate details etc. along with their offer as a proof for performance credentials. Performance credentials will not be evaluated without any documentary evidence
OEMs can authorize and give Tender Specific Authorization to its Agent / Dealers to quote on their behalf provided the vendor takes full responsibility for the quality of the material including warranty obligation and the inspection of product against Railways order is carried out at the manufacturers premises.Please refer para 3.4 of Part-B of Southern Railway Tender Conditions attached with this tender.
29 conditions
Deviations: Technical/Commercial deviations if any should be recorded in the Techno - Commercial Tabulation field itself. If it is attached in the Annexure or as attachments the same are liable to be ignored.
PUBLIC PROCUREMENT POLICY (Preference to Make in India), please refer Para 16.0 Part B of Southern Railway Stores Tender Conditions for Electronic Tenders available under the mentioned link. Procurement of the item is restricted to Local suppliers with minimum local content of 20% (Class-I or Class-II Local supplier as defined in Railway Board letter no: No.2020/RS(G)/779/2/Pt.1 dated 25.09.2020 & 2020/RS(G)/779/2/Pt.1 (E3322671) dt.20.08.2024) only and the vendors who do not qualify to be "Local suppliers" (i.e., "Non-Local suppliers" with local content less than 20%) should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a "Local supplier" for the tendered item participates in the tender, it does so at it's own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor. Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions
(i) Please refer para 15.0 of part - B of "SR TENDER CONDITIONS" for details regarding "BENEFITS OF MSE AS PER PUBLIC PROCUREMENT POLICY". (ii) MSE firms should submit a copy of valid MSE Certificate at the time of submission of their bid. (As the validity of Udyog Aadhar Memorandum was up to 30.06.2022 it is not considered as a valid document for availing MSE preference).
HSN CODE 8607 and SOUTHERN RAILWAY / TAMILNADU GST NO. 33AAAGM0289C1ZQ - (i) Firms with MSME /NSIC Certificate for subject item are requested to submit the same for eligibility towards purchase preference. ii) a) The offers shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number. b) Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate if quoted by the bidder. c) Wherever the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the purchase order or billed. d) Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax billed as per invoice to match the all inclusive price as mentioned in the purchase order. e) Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.
Tenderers shall confirm the following declaration failing which the offer is likely to be ignored. " I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India.I certify that this bidder is not from such a country or,if from such a country,has been registered with the Competent Authority.I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered.Where applicable,evidence of valid registration by the Competent Authority shall be attached."
GST Related: [a] All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per the GST Law. Firms must indicate its GST registration number along with their offer. [b] In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, The Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism (RCM) and deposit the same to the concerned tax authority. [c] The firm should indicate the tariff code (HSN Code) for claiming GST for the tendered item. [d] The offer shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter-se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number. [e] It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate. The Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate, if quoted by the bidder. In case firm misclassifies HSN Code/GST rate, higher GST, if any, due to this misclassification shall be paid and borne by the firm itself. [f] Wherever, the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the Purchase order or billed. [g] Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax bill as per invoice to match the All inclusive Price as mentioned in the Purchase order. [h] Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC. [i] Tenderers should upload GST rate along with documentary evidence, HSN code and full bank details of the firm.ie Bank name, bank address, Account Number, IFSC code & MICR code along with the bid. [j] Firm should also give a declaration that any additional Input Tax Credit benefit, if become available to supplier, the same shall be passed on to purchaser without any undue delay.
Failure Consequences: In the event the firm fails to execute the contract within the stipulated delivery period, the Purchaser shall be entitled to impose liquidated damages for any extension of the delivery period. Further, if the supplier, for any reason, fails to deliver the goods in whole or in part in accordance with the contractual terms and conditions (as amended from time to time), the Purchaser reserves the right to recover damages from the supplier, not as a penalty, but by way of compensation, equivalent to the value of the security deposit for the entire contract. Such damages shall be treated as outstanding recoveries against the vendor and shall be dealt with accordingly."
In case of road delivery, the date of delivery at destination [consignee's end] shall only be treated as delivery date irrespective of F.O.R. / F.O.T. condition mentioned elsewhere in the contract / tender..
In case of road delivery, the date of delivery at destination [consignee's end] shall only be treated as delivery date irrespective of F.O.R. / F.O.T. condition mentioned elsewhere in the contract / tender.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Delivery Terms : FOR Destination.
Mode of Despatch : By Road/Rail
Ambiguous offer will be summarily rejected. Terms of offer must be specific and unambiguous
1 condition
I/We have carefully gone through the IRS Conditions of Contract, 2025 particularly Clause 20 pertaining to "Code of lntegrity: Misdemeanours and Penalties" and the provisions regarding Code of lntegrity, Obligations for proactive disclosures, Misdemeanours, Penalties for misdemeanours . I/We hereby certify that no other concerns or affiliates (such as having common partner/director/promoter/owner/ holding company decision control etc.) have participated in this tender which can give rise to a conflict of interest or fall under anti- competitive practices. We understand that the offers of all such sister concerns including ours are liable to be rejected as per relevant provisions of IRS terms and conditions, and enclosures. I/We, affirm that we shall abide by the Code of Integrity in general, with specific reference to conflict of interest, anti competitive practices and obligation to proactive disclosures. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected, at any stage.
1 location across Tamil Nadu · 1,500 Kg total
SLIP FREE FINISH STAINLESS STEEL SHEET OF SIZE: 1.25 mm x 1120 mm x 2940 mm
51265442~SR
51265442
Open - Indigenous
Goods
Tamil Nadu
₹0
Exempted
25 May 2026
11 May 2026
1 item · 1,500 Kg total
SLIP FREE FINISH STAINLESS STEEL SHEET OF SIZE: 1.25 mm x 1120 mm x 2940 mm T O GRADE X5CrNi18 10 TO RDSO SPECN. C-K201 WITH AMD-1 AND CORRIGENDUM-1 TO THE FOLLOWI NG REQUIREMENTS: No. OF CHEQUERS PER 100mm x 100mm AREA = 16 TO 20. LENGTH OF EACH CH EQUERED PROJECTION = 24 +/- 0.5 mm. WIDTH OF EACH CHEQUERED PROJECTION = 5 +/- 0.5 mm. H EIGHT OF EACH CHEQUERED PROJECTION = 1.3 +/-0.1 mm. THE LENGTH WITH A TOLERANCE OF +10 MM -0 mm. THE WIDTH WITH A TOLERANCE OF +5MM -0 mm. [ Warranty Period: 30 Months after th e date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/ERECTING/PWP, SR | Tamil Nadu | 1500.00 Kg |
| Total | 1,500 Kg | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5759190.pdf
ATTACHMENT
5759503.pdf
ATTACHMENT
5759497.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .