Providing wire fencing with...

Providing and fixing 1.8 metres high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 metres centre to centre founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and comer post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, tum buckles etc. including cost of excavation and CC Block 1:2:4 of size 0.60 x 0.60 x 0.60 mm at site complete in all respects as per satisfaction of EIC. (Based on the HSR 2021 rates with up to date amendments).

Reinforced cement concrete work in walls 1.0m x 0.23m x 1.20m, including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement : 1.1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). (Based on the HSR 2021 rates with up to date amendments).

Providing and fixing of RCC poles having size 0.10 x 0.10 m top and 0.15 x 0.15m at base, 2.1 m high with 4 no MS bars (4 No 10mm dia) fixed at interval of 3m C/C with 10th pole/End pole struted with additional diagonal RCC pole , 10 No 6mm dia MS Rings including painting the RCC pole, cost of excavation and CC Block 1:2:4 of size 0.45 x 0.45 x 0.45 mm and GI barbed wire fencing with 6 No horizontal wires and 2 No. dignoal wires on existing RCC Poles fixed with GI staples, turn buckles at site complete in all respects as per satisfaction of EIC.