Supply, Installation, Testing commissioning of Mini Silage Baler MSB 500

Supply, Installation, Testing & Commissioning Of Mini Silage Baler MSB 500 Equipment Minimum Technical Specification Mentioned In The Bid Document.

1 General Specifications: • Type: Tractor operated / Motor Operated (Fast Forward) • Should be suitable Maize and other green fodder (mainly maize) • Technology: Integrated, Instantly fill Roto n push Press type • Bag Capacity: Min. 50 Kg with chain conveyor • Packing Capacity: Min. 4Ton/Hr or Min. 16 to 25 Bales • Machine Height: Approx. 10 feet • Length: Approx. 12 feet - 15 feet • Capacity to make silage Dry matter: Min. 20-50% • Transmission: (Carden shaft) Included • Transmission Gearbox: Helicoidally • PTO RPM: Min. 540 / 1440 Motor • Compaction ratio: 3:01 • Silage pressure capacity: Min. 650 kg/m3 • Shape of bag: Rectangular • Packing Drum: 8 Nos., Upper 4, Bottom 4 • Hydraulic Pressing: Hydraulic press system used with SS material that makes sure no contamination in fodder while pressing • Hydraulic Pressing Control: PLC Control • Hydraulic Oil Grade: VG68 or any equivalent • Hydraulic Oil Tank Capacity: Min. 150 Liters • Hydraulic Pump Type: Coupling of pump type close coupling single bearing; Hydraulic system 38LPM with WIRE enforce rubber strong piping • Machine wheel size: Wheel size approx. 600 x 16 movable type • Bag pressing stroke: Single shot • Continues capacity: Min. 5000 Kg • Paint: Weather resistant and PU top coat • Mobility: Easily movable farm to farm suitable • Bags Size: 24"x 50" • Inner liner polythene UV protected 150-170 micron, Reusable 2 times • Optional: Outer liner PP Bag 80 Micron for long transportation. • Packing Type: Organic Rope Thread • Reusable: K noted • Bag Drum Specification (L x B x H): Approx. 370 x 270 x 930 mm • Drum Thickness: Min. 2.6 mm • Frame Thickness: Min. 5 Inch Channel • S.S Rod Thickness: Min. 45 mm • Bag Specification: Approx. 24.5 X 50 inch. • Power take-off drive Shaft: o Type: Triangular Type o No. of splines: 6x10 o Length of shaft, mm: Closed: 1016 mm; Extended: 1905 o Provision For locking: Spring lock Pin 1.2 Constructional details: 1.2.1 Main Frame: 1) Type: Rectangular Type 2) Size of frame, mm: 3149 x 1270 x 2540 mm 3) Material: MS 4) Size of channel: 152.4 mm 1.2.2 Feeding Assembly:- 1) Type: Elevator Chain Type 2) Material: MS / PU coated 3) No of roller: 2 4) Size of roller: Approx. 12 Ft. x 1.5 Ft. 1.3 Gear Box: - • Type: Bevel Gear Box • Material: Cast Iron • Gear Ratio: 1:1.75 • Type Of lubrication: Grease with oil 140 No. • Service Schedule: After 300 hrs of working • No of teeth on drive: 6 • No of teeth on driven: 10 • Method of power transmission: PTO Shaft • Method of Lubrication: Grease Gun • Recommended Lubricant: Lithium Grease or any equivalent 1.4 Silo-pack Details: • Size Of Bag Chamber (L x B x H): Approx. 11.5 x 14.5 x 50 inches • Hydraulic Mechanism: o Hydraulic Cylinder: Number: 1 Nos.; Bore: 63 mm; Rod: 45 mm; Stroke Length: 1800 mm • Test Pressure (Bar): 180 Bar • Working Pressure (Bar): 120 Bar 1.5 Hydraulic Oil: • Appearance: Should be Clear • Kinematic Viscosity @ 40 c: Min. 68.3 cst • Kinematic Viscosity @ 100 c: Min. 9.39 cst • Density g/cc @ 15 c: Min. 0.860 • Flash Point: Min. 238 Degree Celsius 1.6 Hydraulic Hose Pipe: • Type: SAE 100 R2AT or equivalent • Working Pressure: 275 Bar • Inside Dia.: 6.35 mm 1.7 Hydraulic Tank: • Oil Capacity in Tank: Min. 150 Liters • Mounting in Tank: Hyd. Hose union, lever Gauge, Tank Air Breather • Safety Device: Temp Gauge, Pressure Gauge, Tank Holding System 1.8 Pressing Mechanism: • Type: Relay Type • Method of Operation: Automatic Operation 1.9 Safety Arrangements: • Safety Pin: Safety Pin given to stop machine automatically in emergency • Hydraulic Oil: 68No. Or any equivalent Min. 150 Liter • Motor: 30HP and Stand Starter 30HP • Cable (Armad): 15 Meter; 80 mm; 4 Core Cable 200 Ft

Installation And Commissioning